RF-18
RF25S–01SP1–00SJ7–0100
RF23S–35SPP–35SJP–0100
RF25S, RF23S SERIES
50
W
RF CABLE ASSEMBLIES
Mates with:
SMA, SMP
SPECIFICATIONS
For complete specifications
see www.samtec.com?RF25S
CABLE
TYPE
END 1
CONNECTOR
END 2
CONNECTOR
OVERALL
LENGTH
MWC-2550-01
Cable:
Type:
Low Loss Microwave Coax
Gauge:
25 AWG
Shield Material:
1. Flat silver plated copper
2. Silver plated copper braid
Dielectric:
Solid FEP
Jacket Material:
FEP
Bend Radius:
9 mm
Impedance:
50
W
±1
W
Propagation Delay:
4.76 nsec/meter
Capacitance:
96.8 pF/meter
Notes:
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
Some lengths, styles and
options are non-standard,
non-returnable.
= MWC-2550-01 Microwave Cable
with 25 AWG solid FEP Dielectric
RF25S
Specify
END OPTIONS
from chart
= Overall Length
in millimeters
–0100 (100 mm)
3.94" minimum
STRIPPED & TINNED
(Dimensions in mm)
CALLOUT
–303030
–303040
–403030
–403040
–404040
B
C
A
–“XXXX”
END OPTIONS
–01SP1 = SMA
Straight Plug
(30 µ" (0.76 µm)
Gold on Center Contact,
Gold Flash on Shell)
–01BJ1 = SMA
Bulkhead Jack
(30 µ" (0.76 µm)
Gold on Center Contact,
Gold Flash on Shell)
–00SJ7 = SMP
Straight Jack
(10 µ" (0.25 µm)
Gold on Center Contact,
Gold Flash on Shell)
END OPTIONS
–00RJ7 = SMP
Right-angle Jack
(10 µ" (0.25 µm)
Gold on Center Contact,
Gold Flash on Shell)
–SING =
Single Ended
(End 2 only)
XXXXXX =
Stripped & Tinned
(End 2 only)
A
3.0
3.0
4.0
4.0
4.0
B
3.0
3.0
3.0
3.0
4.0
C
3.0
4.0
3.0
4.0
4.0
Both center conductor and
braid shield are stripped,
only the center
conductor is tinned.
ALSO AVAILABLE
(MOQ Required)
• Additional stripping and tinning options
Contact Samtec.
OTHER
SOLUTIONS
• Bulls Eye
®
test point available
Contact Samtec.
SPECIFICATIONS
For complete specifications
see www.samtec.com?RF23S
CABLE
TYPE
END 1
CONNECTOR
END 2
CONNECTOR
OVERALL
LENGTH
MWC-2350-01
Cable:
Type:
Low Loss Microwave Coax
Gauge:
23 AWG
Shield Material:
1. Flat silver plated copper
2. Silver plated copper braid
Dielectric:
Solid
FEP
Jacket Material:
FEP
Bend Radius:
12 mm
Impedance:
50
W
±1
W
Propagation Delay:
4.72 nsec/meter
Capacitance:
95.45 pF/meter
Notes:
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
Some lengths, styles and
options are non-standard,
non-returnable.
= MWC-2350-01
Microwave Cable
with 23 AWG solid
FEP Dielectric
RF23S
Specify
END OPTIONS
from chart
= Overall Length
in millimeters
–0100 (100 mm)
3.94" minimum
–“XXXX”
END OPTIONS
–35SJP = 3.50 mm
Straight Jack
(30 µ" (0.76 µm) Gold on Center Contact,
Stainless Steel on Shell)
–35SPP = 3.50 mm
Straight Plug
(30 µ" (0.76 µm) Gold on Center Contact,
Stainless Steel on Shell)
SING
=
Single Ended
(End 2 only)
XXXXXX
=
Stripped & Tinned
(End 2 only)
Due to technical progress, all designs, specifications and components are subject to change without notice.
B
C
A
STRIPPED & TINNED
(Dimensions in mm)
CALLOUT
–303030
–303040
–403030
–403040
–404040
A
3.0
3.0
4.0
4.0
4.0
B
3.0
3.0
3.0
3.0
4.0
C
3.0
4.0
3.0
4.0
4.0
Both center conductor and
braid shield are stripped, only
the center conductor is tinned.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
京公网安备 11010802033920号
EEWORLD
