PF*: Fixed receptacle, with two nuts, cable collet (back panel mounting)
2 keys (alpha=30, plug: male contacts, receptacle: female contacts)
Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
: 9.1 - 10.5 mm
Z : Nut for fitting a bend relief
153.18 g
Performance
Configuration
Insulator
Rated Current
4B.304 : 4 Low Voltage
Y: PEEK for crimp contacts
30 Amps
Specifications
Contact Type: Crimp
Max. Matings: 5000
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
using LEMO components.
1/3
Contact Retention: 75 N
Contact Dia.: 3 mm (0.118in)
Bucket Dia.: 2.9 mm (0.114in)
Min. Conductor: 2.5 mm^2 (AWG 14)
Max. Conductor: 4 mm^2 (AWG 10)
R (max): 3.1 mOhm
Vtest (contact-shell): 1200 V (AC), 1700 V (DC)
Vtest (contact-contact): 1800 V (AC), 2550 V (DC)
Others
Temp (min / max): -55°C / +250°C
Humidity (max): <=95% [at 60 deg C /140 F]
Vibration: 15 g [10 Hz - 2000 Hz]
Shock Resistance: 100 g [ 6 ms]
Salt Spray Corrosion: >1000 hr
Climatical Category: 50/175/21
Shielding (min): 75 dB (10 MHz)
Shielding (min): 40 dB (1 GHz)
IP Rating: 50
DRAWINGS
Draws
Dimensions
A
mm.
in.
30
1,18
B
32
1,26
E
11
0,43
L
69
2,72
M
4.5
0,18
S1
23.5
0,93
S2
20
0,79
S3
30
1,18
e
M25x1.0
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
using LEMO components.
2/3
RECOMMENDED BY LEMO
Tools
Crimp Tool: DPC.91.102.V
Crimp settings: AWG/Selector = 10-12-14/3-1-1
Positionner: DCE.91.304.BVCM
Extractor: DCF.91.303.5LT
Replacement contact: EGG.4B.680.ZZM
Cables
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
[color=#333333][size=14px] NFC is developed on the basis of RF radio frequency technology. NFC is essentially not much different from RF radio frequency technology. Both are based on signal transmissi...
Help: The following delay program has been completed, but it is always 0.3 seconds longer (setting 0.2 results in 0.5, setting 2.3 results in 2.6...), the microcontroller uses stc15w201s, and the freq...
[i=s]This post was last edited by 1nnocent on 2022-7-27 15:44[/i]The function implemented by the RGB three-color lamp routine is to light up the three colors R, G, and B alternately. I would like to s...
[i=s]This post was last edited by ddllxxrr on 2021-1-28 12:24[/i]This is how the matter originated.
My company wants to modify a solution, so I will do it. I still use the old MCU STM32F100C8T6. Since...
There are four #include "xx.h" at the beginning. Whichever one is put first, the compilation prompts an error. It seems that #include "xx.h" is not executed. The error prompt is as follows...
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
