3
Splicing Tapes
415
•
465
•
469
• 9420 • 9497 • 9499
Technical Data
June, 2003
Product Description
3M™ Splicing Tapes utilize an acrylic pressure sensitive adhesive system that offers
a balance of initial adhesion and good holding power.
Construction
Products
Adhesive Type:*
Adhesive Carrier:
Release Liner:
Approximate Thickness:
Release Liner
Tape Only
Tape Color:
3M™ Splicing 3M™ Splicing 3M™ Splicing 3M™ Splicing 3M™ Splicing 3M™ Splicing
Tape 415
Tape 465
Tape 469
Tape 9420
Tape 9499
Tape 9497
400
Polyester Film
Tan Paper
400
None
Tan Paper
330
Tissue
White Silicone
Coated Paper
0.005 in.
(0.13 mm)
0.0055 in.
(0.14 mm)
Double
Coated Film
Light Red
72#
Densified Kraft
400
Polyester Film
Tan Paper
430
None
Tan Paper
430
None
Tan Paper
0.004 in.
(0.10 mm)
0.004 in.
(0.10 mm)
Double
Coated Film
Clear
Tan 60#,
Densified Kraft
0.004 in.
(0.10 mm)
0.002 in.
(0.05 mm)
Adhesive
Transfer
Clear
Tan 60#,
Densified Kraft
0.004 in.
(0.10 mm)
0.004 in.
(0.10 mm)
Double
Coated Film
Red
Tan 60#,
Densified Kraft
0.003 in.
(0.08 mm)
0.002 in.
(0.05 mm)
Adhesive
Transfer
Clear
Tan 60#,
Densified Kraft
0.003 in.
(0.08 mm)
0.002 in.
(0.05 mm)
Adhesive
Transfer
Light Red
Tan 60#,
Densified Kraft
Liner:
*3M™ Adhesive 430 is a firm acrylic pressure sensitive adhesive which features both high initial adhesion and good high temperature
holding power.
3M™ Adhesive 400 is a medium-firm acrylic pressure-sensitive adhesive system. It features an excellent balance of good initial
adhesion (quick stick) and good shear holding power.
3M
™
Splicing Tapes
415 • 465 • 469 • 9420 • 9497 • 9499
Typical Physical
Properties and
Performance
Characteristics
Products
Adhesion to Steel:
(ASTM D3330)
Relative High Temperature
Operating Ranges:
Long Term (days, weeks)
Short Term (minutes, hours)
Relative Solvent Resistance:
U.V. Resistance:
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
3M™ Splicing 3M™ Splicing 3M™ Splicing 3M™ Splicing 3M™ Splicing 3M™ Splicing
Tape 415
Tape 465
Tape 469
Tape 9420
Tape 9497
Tape 9499
25 oz./in.
(27 N/100 mm)
25 oz./in.
(27 N/100 mm)
60 oz./in.
(52 N/100 mm)
25 oz./in.
(27 N/100 mm)
45 oz./in.
(50 N/100 mm)
45 oz./in.
(50 N/100 mm)
150°F
(65°C)
180°F
(82°C)
Good
Excellent
180°F
(82°C)
250°F
(121°C)
Good
Excellent
200°F
(94°C)
350°F
(180°C)
Medium/High
Excellent
150°F
(65°C)
180°F
(82°C)
Good
Excellent
250°F
(121°C)
350°F
(177°C)
Good
Excellent
300°F
(149°C)
500°F
(260°C)
Good
Excellent
Available Sizes
Available Lengths
(Subject to Minimum
Order Requirements):
Standard
Maximum In:
1/4" to 3/8" widths
3/8" to 1/2" widths
1/2" to 2" widths
2" and greater
3M tape 415
36 yds.
(32.9 m)
180 yds.
(165 m)
180 yds.
(165 m)
360 yds.
(329 m)
360 yds.
(329 m)
3M tape 465
60 yds.
(54.9 m)
60 yds.
(54.9 m)
60 yds.
(54.9 m)
360 yds.
(329 m)
360 yds.
(329 m)
3M tape 469*
60 yds.
(54.9 m)
60 yds.
See note below
60 yds.
See note below
60 yds.
See note below
60 yds.
See note below
3M tape 9420
36 yds.
(32.9 m)
180 yds.
(165 m)
180 yds.
(165 m)
360 yds.
(329 m)
360 yds.
(329 m)
3M tape 9497
60 yds.
(54.9 m)
60 yds.
(54.9 m)
60 yds.
(54.9 m)
360 yds.
(329 m)
360 yds.
(329 m)
3M tape 9499
60 yds.
(54.9 m)
60 yds.
(54.9 m)
60 yds.
(54.9 m)
360 yds.
(329 m)
360 yds.
(329 m)
*3M tape 469 only comes in 1/2", 3/4", 1" and 1
1
/
2
".
Available Widths
(Subject to Minimum
Order Requirements):
Minimum
Maximum
Normal Slitting Tolerance:
Core Size (ID):
1/4 in.
(6.35 mm)
48 in.
(1219 mm)
± 1/32 in.
(0.8 mm)
3.0 in.
(76.2 mm)
1/4 in.
(6.35 mm)
48in.
(1219 mm)
± 1/32 in.
(0.8 mm)
3.0 in.
(76.2 mm)
1/2 in.
(12.70 mm)
2 in.
(50.8 mm)
± 1/32 in
(0.8 mm)
3.0 in.
(76.2 mm)
1/4 in.
(6.35 mm)
48 in.
(1219 mm)
± 1/32 in.
(0.8 mm)
3.0 in.
(76.2 mm)
1/4 in.
(6.35 mm)
48 in.
(1219 mm)
± 1/32 in.
(0.8 mm)
3.0 in.
(76.2 mm)
1/4 in.
(6.35 mm)
48 in.
(1219 mm)
± 1/32 in.
(0.8 mm)
3.0 in.
(76.2 mm)
-2-
3M
™
Splicing Tapes
415 • 465 • 469 • 9420 • 9497 • 9499
Features
• The red color of 3M™ Splicing Tape 9420 may cause some discoloration. The
user should evaluate the tape to determine whether it is fit for the user’s particular
purpose.
• 3M™ Splicing Tape 465 meets the requirements of U.S. Government specification
MIL-P-19834B, Type I.
• 3M™ Splicing Tape 469 has high initial adhesion, high contact heat resistance
and good adhesion to a variety of paper grades and thicknesses and is ideal for
bonding a variety of similar or dissimilar materials.
Application Techniques
• Bond strength is dependent upon the amount of adhesive-to-surface contact
developed. Firm application pressure helps develop better adhesive contact and
improve bond strength.
• To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well
unified.
• Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
Application Ideas
• 3M™ Splicing Tapes 415 and 465 can be used for high-speed flying splices and
zero speed splices on most grades of paper such as newsprint, clay coated,
corrugated stocks.
• 3M tape 469 is a high tack, high temperature double coated tissue tape which is
light red in color for visible splices. The medium firm adhesive features good
quick stick for high-speed flying splices on most grades of paper and excellent
heat resistance for many high temperature drying ovens.
• 3M tape 9420 can be used for flying splices on paper and film where easy visibility
for removal of spliced area is desirable.
• 3M™ Splicing Tape 9497 is designed for resistance to high temperatures and is
ideal for splicing many paper medians used by corrugators.
• 3M™ Splicing Tape 9499 is ideal for printers who require especially high drying
temperatures or who utilize long ovens. This specialty tape has extremely high air
heat (oven) resistance and is ideal for zero speed automatic splicing.
-3-
3M
™
Splicing Tapes
415 • 465 • 469 • 9420 • 9497 • 9499
Storage
Store in original cartons at 70°F (21°C) and 50% relative humidity.
Shelf Life
24 months from date of manufacture.
For Additional
Information
To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550
or visit www.3M.com/adhesives. Address correspondence to:
3
M Industrial Adhesives and Tapes Division,
Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55144-1000. Our fax number is 651-778-4244. In
Canada, phone: 1-800-364-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00.
Product Use
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Warranty and
Limited Remedy
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Limitation of Liability
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
ISO 9002
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9002 standards.
3
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
Recycled Paper
40% pre-consumer
10% post-consumer
Printed in U.S.A.
©3M 2003 70-0709-3850-4
(6/03)
-4-
/201809303815456_pdf/pg_0001.png)
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD/201809303815456_pdf/1.png)
/201809303815456_pdf/2.png)
/201809303815456_pdf/3.png)
/201809303815456_pdf/4.png)
/201809303815456_pdf/pg_0002.png)
/201809303815456_pdf/pg_0003.png)
/201809303815456_pdf/pg_0004.png)
