RCP
www.vishay.com
Vishay Dale
Thick Film Chip Resistors, Industrial, High Power,
Aluminum Nitride Substrate
FEATURES
• Thick film resistive element on an aluminum
nitride (AlN) substrates
• Very high thermal conductivity in a small
package size
• Termination: tin / lead wraparound termination
over nickel barrier. Also available with
lead (Pb)-free wraparound terminations.
Aluminum nitride
over 3 x more power - same size
• Capability to develop specific reliability
programs designed to customer requirements
• Operating temperature range: -65 °C to +155 °C
• High frequency performance to 6 GHz
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Available
Available
MATERIAL SPECIFICATIONS
Resistive element
Encapsulation
Substrate
Termination
Solder finish
Ruthenium oxide
Epoxy
Aluminum nitride
Solder-coated nickel barrier
Pure tin or tin / lead solder alloy
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
RCP0505
RCP0603
RCP1206
RCP2512
CASE
SIZE
0505
0603
1206
2512
POWER RATING
(1)
(Standard
Board Mount)
P
25 °C
W
1.4
1.5
2.4
3.5
POWER RATING
(1)
(Active
Temperature
Control)
W
5.0
3.9
11
22
MAXIMUM
WORKING
VOLTAGE
V
PxR
PxR
PxR
PxR
RESISTANCE
RANGE
10 to 2K
10 to 2K
10 to 2K
10 to 2K
TOLERANCE
±%
1, 2, 5
1, 2, 5
1, 2, 5
1, 2, 5
TEMPERATURE
COEFFICIENT
± ppm/°C
150
150
150
150
Notes
• Consult factory for availability of additional case sizes
(1)
The power rating depends on the maximum temperature of the resistive element. The temperature of the resistive element and adjacent
materials will rise due to the power dissipation of the resistor. The majority of this heat/energy is dissipated by conduction through the
substrate, terminations, solder joints, and printed circuit board. The maximum power rating in a particular application only applies if the
temperature of the resistive element is maintained at or below 155 °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RCP1206W100RGWB (preferred part numbering format)
R
GLOBAL
MODEL
RCP0505
RCP0603
RCP1206
RCP2512
C
P
1
2
0
6
W
1
0
0
R
G
W
B
SPECIAL
Blank = standard
(dash number)
(up to 3 digits)
from
1 to 999
as
applicable
BOTTOM TERM.
W
= wide
B
= traditional
RESISTANCE
VALUE
R=
K = k
10R0
= 10
1K30
= 1.3 k
TOLERANCE
CODE
F
=±1%
G
=±2%
J
=±5%
PACKAGING CODE
TP
= tin / lead, T/R (full reel)
S3
= tin / lead, T/R (1000 pieces)
WB
= tin / lead, tray
S2
= tin / lead, T/R (500 pieces)
S6
= tin / lead, T/R (300 pieces)
EA
= lead (Pb)-free, T/R (full reel)
EB
= lead (Pb)-free, T/R (1000 pieces)
ET
= lead (Pb)-free, tray
EC
= lead (Pb)-free, T/R (500 pieces)
ED
= lead (Pb)-free, T/R (300 pieces)
Note
• For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543)
Revision: 10-Mar-17
Document Number: 31098
1
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RCP
www.vishay.com
Vishay Dale
TEST RESULTS
(TYPICAL TEST LOTS)
± 0.20 %
± 120 ppm
± 0.02 %
PERFORMANCE
TEST
Resistance to soldering heat
Resistance temperature characteristic
Low temperature operation
RCP0505
Short time overload
RCP0603
RCP1206
RCP2512
High temperature exposure
Moisture resistance
Life
Solderability
RCP0505
Solder mounting integrity
RCP0603
RCP1206
RCP2512
CONDITIONS OF TEST
2 cycles; > 183 °C for 90 s to 120 s
-55 °C to +125 °C
-65 °C at rated voltage
3.1 W applied for 5 s
4.4 W applied for 5 s
4.7 W applied for 5 s
7.7 W applied for 5 s
+150 °C for 100 h
240 h at
80 % RH
1000 h at +70 °C
J-STD-202, test B
Per MIL-PRF-55342:
1 kg force applied
2 kg force applied
2 kg force applied
3 kg force applied
No evidence of mechanical damage
± 0.10 %
± 0.15 %
± 0.10 %
95 % coverage
± 0.10 %
DIMENSIONS
in inches (millimeters)
D
B
C
D
C
A
E
A
E
WIDE BOTTOM TERMINAL (W)
TRADITIONAL TERMINAL (B)
GLOBAL
MODEL
RCP0505W
RCP0505B
RCP0603W
RCP0603B
RCP1206W
RCP1206B
RCP2512W
RCP2512B
A
(LENGTH)
0.055 ± 0.005
(1.40 ± 0.13)
0.055 ± 0.005
(1.40 ± 0.13)
0.063 ± 0.005
(1.60 ± 0.13)
0.063 ± 0.005
(1.60 ± 0.13)
0.122 ± 0.005
(3.10 ± 0.13)
0.122 ± 0.005
(3.10 ± 0.13)
0.250 ± 0.005
(6.35 ± 0.13)
0.250 ± 0.005
(6.35 ± 0.13)
B
(WIDTH)
0.050 ± 0.005
(1.27 ± 0.13)
0.050 ± 0.005
(1.27 ± 0.13)
0.032 ± 0.005
(0.81 ± 0.13)
0.032 ± 0.005
(0.81 ± 0.13)
0.060 ± 0.005
(1.52 ± 0.13)
0.060 ± 0.005
(1.52 ± 0.13)
0.124 ± 0.005
(3.15 ± 0.13)
0.124 ± 0.005
(3.15 ± 0.13)
C
(HEIGHT)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.018 ± 0.005
(0.46 ± 0.13)
0.018 ± 0.005
(0.46 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
D
(TOP TERM)
0.010 ± 0.005
(0.25 ± 0.13)
0.010 ± 0.005
(0.25 ± 0.13)
0.012 ± 0.005
(0.30 ± 0.13)
0.012 ± 0.005
(0.30 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
E
(BOTTOM TERM)
0.020 ± 0.005
(0.51 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.023 ± 0.005
(0.58 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.048 ± 0.005
(1.22 ± 0.13)
0.015 ± 0.005
(0.38 ± 0.13)
0.113 ± 0.005
(2.87 ± 0.13)
0.020 ± 0.005
(0.51 ± 0.13)
Revision: 10-Mar-17
Document Number: 31098
2
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RCP
www.vishay.com
Vishay Dale
RECOMMENDED SOLDER PAD DIMENSIONS
in inches (millimeters)
a
l
a
a
l
a
b
b
WIDE BOTTOM TERMINAL (W)
TRADITIONAL TERMINAL (B)
GLOBAL
MODEL
RCP0505W
RCP0505B
RCP0603W
RCP0603B
RCP1206W
RCP1206B
RCP2512W
RCP2512B
a
(LENGTH)
0.040
(1.02)
0.035
(0.89)
0.043
(1.09)
0.035
(0.89)
0.068
(1.73)
0.037
(0.94)
0.133
(3.38)
0.040
(1.02)
b
(WIDTH)
0.055
(1.40)
0.055
(1.40)
0.037
(0.94)
0.037
(0.94)
0.066
(1.68)
0.066
(1.68)
0.129
(3.28)
0.129
(3.28)
l
(SPACING)
0.015
(0.38)
0.025
(0.64)
0.018
(0.46)
0.033
(0.84)
0.018
(0.46)
0.081
(2.06)
0.024
(0.61)
0.210
(5.33)
Revision: 10-Mar-17
Document Number: 31098
3
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
