Installation Tools and Accessories
General Information and Selection
There is a strong element of craftsmanship involved in
making consistently successful strain gage installations.
As for any other field, this craft has its own special tools
and working materials—found by seasoned professionals
to be most effective for achieving the desired results.
The installation accessories described on this and the
following pages represent the distillation of many years’
experience in determining the most appropriate tool or
material for each task in the gage installation process.
Every accessory item listed here has been thoroughly
tested and evaluated in the Micro-Measurements
Applications Engineering Laboratory for quality and
reliability, for ease of use, and for compatibility with
all other Micro-Measurements products. It should
be noted that the instruction bulletins supplied for
gages, adhesives, protective coatings, etc. assume the
availability of these accessories to the user, since such
is generally the case for an experienced practitioner in a
well-equipped laboratory.
TOOLS
SSH-1 SURGICAL SHEARS:
Chromium steel, 4-1/2 in (115 mm) long, with one sharp
pointed blade and one blunt-end blade.
STW-1 TWEEZERS:
Stainless steel, 4-1/2 in (115 mm) long. Rugged, precision
ground sharp ends. Primarily used for handling leadwires.
BTW-1 TWEEZERS:
Stainless steel, 4-1/2 in (115 mm) long. Antimagnetic; acid
and corrosion resistant. Thin, flat blunt ends ideal for safe
handling of strain gages.
DPR-1 DENTAL PROBE:
Stainless steel “pick”. Flexible 75° pointed tip.
SSC-1 SURGICAL SCALPEL AND BLADE:
Stainless steel, uses SSC-2 snap-in replacement blade.
SSH-1
STW-1 BTW-1
DPR-1
SSC-1
SSC-2 REPLACEMENT SCALPEL BLADES:
Five blades per package. Not shown.
SSS-1 STEEL SCALE:
6 in (150 mm) long, satin-chromed finish. Graduated in
inches (1/32, 1/64, 1/10, 1/100).
SSS-2 STEEL SCALE:
6 in (150 mm) long, satin-chromed finish. Graduated in
inches (1/10, 1/100) and millimeters (0.5, 1).
DP-1 4-H DRAFTING PENCIL:
For gage layout.
DWC-1 DIAGONAL CUTTERS:
Stainless steel, 4-1/2 in (115 mm) long, precision cutter for
wire up to AWG No. 18 (1 mm diameter).
NNP-1 NEEDLE-NOSED PLIERS:
Nickel-chrome plated, 4-1/2 in (115 mm) long, with
serrated needle-nosed jaws.
ATS-2 GAGE APPLICATION TOOL SET:
Includes one of each item plus one additional DPR-1
Dental Probe. Durable, polypropylene box. Not shown.
SSS-1
SSS-2
DP-1
DWC-1
NNP-1
Document No.: 11021
Revision: 02-Feb-2018
For technical questions, contact
mm@vpgsensors.com
www.micro-measurements.com
1
Installation Tools and Accessories
General Information and Selection
TOOLS
GT-11
SPT-1
GT-11 CAMEL’S HAIR BRUSH
3/8 in (9.5 mm).
SPT-1 STAINLESS STEEL MIXING SPATULA
Double blade. Overall length 8 in (200 mm).
SPT-2 STAINLESS STEEL MIXING SPATULA:
Single blade. Overall length 7-3/4 in (195 mm).
Wooden handle.
SPT-2
MHG-1
MHG-1 MASTER MITE HEAT GUN:
Lightweight, compact, perfectly balanced. 2 lb (0.9 kg)
with nozzle attached. 8-7/8 x 7 in (225 x 180 mm). Quiet,
brush- less-type shaded pole motor rated for continuous
duty. Three interchangeable nozzle heating elements
control average outlet temperature 1/2 in (13 mm) from
nozzle at +500°F (+260°C), +650°F (+345°C), or +800°F
(+425°C). Air- cooled barrel. Three-conductor grounded
linecord. Slip-on deflector completely surrounds
shrinkable tubing (HST-1) with heat. Pinpoint adapter
directs heat without affecting adjacent areas. 120Vac,
60Hz. Maximum current draw 5.4 amps.
MHG-2 MASTER MITE HEAT GUN:
Same as above, except 220 Vac.
GENERAL-PURPOSE TAPES AND MATERIALS
PLY-001
PCT-3M GAGE INSTALLATION TAPE:
For gage handling. Compatible with the cure temperature
ranges of all MM adhesives up to 400°F (204°C). 3/4 in x
72 yd (19 mm x 65 m).
Three ordering options:
PCT-3M:
Tape only.
PCT-3MD:
Tape and hand dispenser*.
PCT-3D:
Hand dispenser* only.
*This portable, high impact, durable plastic hand-held
tape dispenser features a hand brake in the core.
PDT-3 PAPER DRAFTING TAPE:
For soldering mask, and lead positioning. 0.75 in x 400 in
(19 mm x 10.1 m).
PLY-001 Kapton
®
Film:
For electrical insulation, 4 x 10 x 0.001 in thick
(100 x 250 x 0.02 mm thick).
PCT-3MD
Store all at or near +75°F (+24°C).
PDT-3
www.micro-measurements.com
2
For technical questions, contact
mm@vpgsensors.com
Document No.: 11021
Revision: 02-Feb-2018
Installation Tools and Accessories
General Information and Selection
HIGH-TEMPERATURE TAPES AND MATERIALS
MJG-2 MYLAR
®
TAPE:
For gage handling with heat-curing resin systems.
Compatible with the cure temperature ranges of all
MM adhesives up to 400°F (204°C).
1/2 in x 216 ft (13 mm x 66 m).
TFT-2 THERMOSETTING [+340°F (+170°C)]
FIBERGLASS TAPE:
For electrical insulation at high temperatures.
1/2 In x 180 ft (13 mm x 55 m).
FGC-1 WOVEN FIBERGLASS CLOTH:
Bound edges. For lead anchoring when used
in conjunction with M-Bond adhesives and
M-Coat protective coatings. 0.015 in x 1 in x 50 yd
(0.4 mm x 25 mm x 46 m).
FGC-1
TFE-2
TFE-2 HIGH MODULUS TFE TEFLON
®
WITH
SILICONE MASTIC:
1/2 in x 108 ft (13 mm x 33 m).
Store all at or near +75°F (+24°C).
MJG-2
TFT-2
CLAMPING SUPPLIES
TFE-1
HSC-2
HSC-1
HSC-3
GT-12
SGP-2
GT-14
SGP-1
HSC-1 SPRING CLAMP:
Maximum Opening:
1 in (25 mm).
Maximum Recommended Opening:
1/2 in (13 mm).
Nominal Clamp Force at Recommended Opening:
20 lbf (89 N).
HSC-2 SPRING CLAMP:
Maximum Opening:
2 in (51 mm).
Maximum Recommended Opening:
1 in (25 mm).
Nominal Clamp Force at Recommended Opening:
24 lbf (107 N).
HSC-3 SPRING CLAMP:
Maximum Opening:
3 in (76 mm).
Maximum Recommended Opening:
1-1/2 in (38 mm).
Nominal Clamp Force at Recommended Opening:
30 lbf (133 N).
Mylar and Teflon are Registered Trademarks of DuPont.
Document No.: 11021
Revision: 02-Feb-2018
GT-12 NEG’ATOR CONSTANT FORCE EXTENSION
SPRING CLAMP:
1 x 0.006 x 38 in (25 mm x 0.4 mm x 0.97 m) stainless
steel band, drum I.D. 1.16 in (30 mm), 10.6 lb (47 N) load.
TFE-1 TEFLON FILM:
0.003 in x 1 in x 50 ft (0.08 mm x 25 mm x 15 m).
GT-14 PRESSURE PADS AND BACKUP PLATES:
Kit of 12 Silicone Rubber Pads 3/32 x 1/2 x 1-1/4 in
(2.5 x 13 x 32 mm), and 12 aluminum plates,
1/8 x 1/2 x 1-1/4 in (3 x 13 x 32 mm).
SGP-1 SILICONE RUBBER:
Three pieces, each 3/32 x 1 x 6 in (2.5 x 25 x 150 mm).
SGP-2 SILICONE RUBBER:
One piece, 3/32 x 6 x 6 in (2.5 x 150 x 150 mm).
For technical questions, contact
mm@vpgsensors.com
www.micro-measurements.com
3
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1