JJM SERIES
–
DETECTOR SWITCHES
Telecommunications
RoHS Compliant
White goods
Instrumentation
Automotive
Applications
JJ Series
–
Detector Switches
Benefits
Compact Size
Sharp detection
feeling
Halogen and Lead
Free
TE Connectivity is pleased to introduce its JJ Series of Detector Switches, suitable
for a wide variety of applications given their several presentations ranging from
horizontal or vertical actuated options as well as Gull-winged, J-leaded and
Through-Hole mounting possibilities.
The Detector Switches will be offered in a wide range of sizes giving the possibility
for countless applications going from automotive to telecommunications.
JJ Series
–
Family Classification
Series
JJA
JJB
JJC
JJD
JJE
JJF
JJG
JJH
JJI
JJJ
JJK
JJL
JJM
JJN
JJO
JJP
Body Size
3.5x2.8 mm
3.5x2.98 mm
3.5x3.3 mm
4.2x3.6 mm
4.7x3.5 mm
4.7x3.8 mm
5.7x4.0 mm (High-Rating)
5.7x4.0 mm (Standard-Rating)
5.0x4.4 mm
6.0x4.85 mm / 5.5x4.7 mm
6.3x3.0 mm
6.5x3.9 mm
5.7x4.0 mm
5.7x4.0 mm (Wedge)
10.0x3.8 mm
10.6x10.0 mm
2331293-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone
or live chat, go
to:
www.te.com/hel
JJM SERIES
–
DETECTOR SWITCHES
1. Style
Detector “witches are
mainly used as signal switches of electric devices, with the general
requirements of mechanical and electrical characteristic.
1.1 Operating Temperature Range: -10℃
to
60℃
1.2 Storage Temperature Range: -30℃ to 80℃
1.3 The shelf life of product is within 6 months.
2. Current Range:
100mA, 12VDC
3. Type of Actuation:
Auto Return
4. Test Sequence:
Item
Description
Visual
Examination
Test Conditions
Physical inspection without
applying any external forces.
Requirements
There shall be no defects
that affect the
serviceability of the
product.
Appearance
1
2
Contact
Resistance
Shall be measured at 1KHz ± 200Hz
(20mV Max, 50mA Max) or 1A 5VDC by
voltage drop method.
80mΩ
Max.
Electric
Performance
3
Insulation
Resistance
Measurements shall be made at 100 VDC
potential between terminals and cover.
MΩ
Min.
4
Dielectric
Withstanding
Voltage
Apply 100 VAC (50Hz or 60Hz) between
terminals and cover for 1 minute.
There shall be no
breakdown or flashover
2331293-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone
or live chat, go
to:
www.te.com/hel
JJM SERIES
–
DETECTOR SWITCHES
5
Operating
Force
Applying force to the center of
the stem for 2.00mm
70gF Max.
(.69N Max.)
Shall be free from any
terminal damage and
looseness and breakage of
terminal holding position.
Terminal may be bent after
test, electrical performance
requirement specified in
item 4 shall be satisfied.
6
Terminal
Strength
Fixing the switch then apply with a
static load of 0.3KgF to the tip of the
terminal in a desired direction for 1
minute
Mechanical
Performance
7
Control
Strength
1) A static load of 1KgF shall be applied
in the operating direction of actuator
for 15 seconds.
2) A static load of 0.3KgF shall be
applied in the pulling direction of
actuator for 15 seconds. (For
construction with lock, the test shall be
conducted at the condition of lock
released)
3) A static load of 0.7KgF shall be
applied to the vertical direction of
operation at the tip of actuator for 15
seconds.
Shall be free from
mechanical and electrical
abnormalities.
Durability
8
Operating
Life
50,000 cycles operations at a rate of 15
to 20 cycles/min. without load.
(When pushing the actuator at right
angle)
1) Contact resistance:
150mΩ Min.
2) Insulation resistance:
10MΩ Min.
3) Voltage proof: Applying
100V AC for 1 minute, no
dielectric breakdown shall
occur.
4) Operating force: Within
30% of specified value.
5) No abnormalities shall be
recognised in appearance
construction.
1) Contact resistance:
150mΩ Min.
2) Insulation resistance:
10MΩ Min.
3) Voltage proof: Applying
100V AC for 1 minute, no
dielectric breakdown shall
occur.
4) Operating force: Within
30% of specified value.
5) No abnormalities shall be
recognised in appearance
construction.
Weather-proof
9
Temperature
cycling
After 5 cycles of following conditions,
the switch shall be allowed to stand
under normal temperature and
humidity condition for 1 hour and then
measurement shall be made within 1
hour after that.
Water drops shall be removed.
2331293-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone
or live chat, go
to:
www.te.com/hel
京公网安备 11010802033920号
EEWORLD
