HDM Series
Moisture Resistant Carbon Film Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Features:
•
•
•
•
•
Specialized materials, processes and controls ensure a part
that is impervious to moisture
Small size with high power density
Auto sequencing / insertion capable
Low cost replacement in many applications using metal
glaze resistors
RoHS compliant / lead-free
Electrical Specifications
Type/Code
HDM14
HDM12
Power Rating (Watts)
@ 70ºC
0.25W
0.5W
Maximum
Working
Voltage
(1)
300V
350V
Maximum
Overload
Voltage
600V
700V
Ohmic Range (Ω) and Tolerance
1%, 2%, 5%
1 - 2.2M
(1) Lesser of √PR or maximum working voltage.
Mechanical Specifications
Type/Code
HDM14
HDM12
A
Body Length
0.126 + 0.008 /- 0
3.20 + 0.20 /- 0
0.236 ± 0.012
6.00 ± 0.30
B
Body Diameter
0.071 ± 0.008
1.80 ± 0.20
0.094 ± 0.008
2.40 ± 0.20
C
Lead Length (Bulk)
1.102 ± 0.118
28.00 ± 3.00
1.102 ± 0.118
28.00 ± 3.00
D
Lead Diameter
0.018 ± 0.002
0.45 ± 0.05
0.024 ± 0.001
0.60 ± 0.02
Unit
inches
mm
inches
mm
Rev Date: 02/29/2016
This specification may be changed at any time without prior notice
Please confirm technical specifications before you order and/or use.
1
www.seielect.com
marketing@seielect.com
HDM Series
Moisture Resistant Carbon Film Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Performance Characteristics
Test
Performance or Quality Acceptance
R < 100KΩ: -500 ~ +350ppm/ºC
100KΩ ≤ R < 1MΩ: -700 ~ 0ppm/ºC
R ≥ 1MΩ: -1500 ~ 0ppm/ºC
Test Condition and Method
Measure resistance (R0) at room temperature (t),
after that, measure again the resistance (R) at
100ºC higher than room temperature.
TCR - Temperature Coefficient of Resistance
Overload (Short Time)
Change of resistance
≤±(0.75% + 0.05Ω)
Apply the 2.5 times rated voltage or max overload
voltage whichever is lower for 5 seconds and leave
in room temperature for one hour after test.
In the chamber having temperature 40±2ºC and
relative humidity 93±3%, apply one percent of the
power rating, 1.5 hour ON, 0.5 hour OFF for
1000 hours and leave in room temperature for
one hour after test.
At 70±2ºC, apply rated DC voltage 1.5 hour ON,
0.5 hour OFF for 1000 hours and leave in room
temperature for one hour after test.
121ºC, 2atm, 98-100% R.H.
Apply the rated DC voltage for 100 hours.
Damp heat (Steady State)
Change of resistance
R < 100KΩ: ≤±(3% + 0.05Ω)
R ≥ 100KΩ: ≤±(5% + 0.05Ω)
Change of resistance
R < 100KΩ: ≤±(2% + 0.05Ω)
R ≥ 100KΩ: ≤±(3% + 0.05Ω)
Change of resistance
≤±(20% + 0.05Ω)
Load Life
Pressure Cooker Bias Test
Reference standards: JIS C5201-1, IEC60115-1
How to Order
1
2
3
4
5
6
7
8
9
10
11
H
D
M
1
2
J
T
4
K
7
0
Product Series
Moisture Resistant
HDM
Carbon Film
Size Power Rating
0.25W
14
0.5W
12
Tolerance
Tol
Value
Code
F
1%
E24
G
2%
J
5%
Code
T
A
B
Description
Tape and Reel
Ammo
Bulk
Size
all sizes
all sizes
14
12
Quantity
5,000
5,000
2,000
1,000
Resistance Value
Four characters with the
multiplier used as the
decimal holder.
1 ohm = 1R00
10 Kohm = 10K0
2.2 Mohm = 2M20
Rev Date: 02/29/2016
This specification may be changed at any time without prior notice
Please confirm technical specifications before you order and/or use.
2
www.seielect.com
marketing@seielect.com
京公网安备 11010802033920号
EEWORLD
