Industrial Gigabit Ethernet to Fiber Media Converter
EF24 Series
Feature Highlights
Cut-Through Forwarding Mode
Available in both SC and SFP Fiber Connectors
Redundant Power Input
Jumbo packets up to 9K bytes
Link Fault Pass-Through (LFP) and Link Loss Carry
Forward
Operating Temperature : -10°C ~ 70°C
Product Description
EF24 Series Industrial Gigabit Ethernet to Fiber Converter provide media conversion between
10/100/1000 BASE-T(X) and 100/1000 BASE-F(X) (available in both SC and SFP fiber connectors).
EF24 Series comes with a DIP switch to configure or enable the more advanced functions including the
fiber speed, fiber auto negotiation, link fail pass-through, terminal/center device, power saving, jumbo
frame, and cut-through forwarding to reach the maximum flexibility.
Atop Technologies, Inc.
TEL : +886-3-5508137
FAX: +886-3-5508131
sales@atop.com.tw
http://www.atop.com.tw
Design and specification are subjected to change without notice.
All product names referenced herein are registered trademarks of their respective companies.
V2.0
Specification
Technology
Standards
Interface
RJ45 Ports
Fiber Ports
LED Indicators
DIP Switch
Power Management
Input Voltage
Input Current
Connector
Reverse Polarity Protection
Physical Characteristics
Housing
Dimensions(W x H x D)
Weight
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Optical Fiber Specifications
Mode
Distance
Bit Rate
Wavelength (nm)
Application
Tx Power (dBm)
Rx Sensitivity (dBm)
Remark
Multi-mode
550M
1250Mbps
850
1000Base-SX
-9.5~-4
< -18
EF24-1G-1Fm-SC-550M
Single-mode
10KM
1250Mbps
1310
1000Base-LX
-9.5~-3
< -20
EF24-1G-1Fs-SC-10
-10°C ~ 70°C (14°F ~ 158°F)
-40°C ~ 85°C (-40°F ~ 185°F)
5 ~ 95%, 55°C (non-condensing)
Metal, IP30 protection
32mm x 90mm x 110mm (1.26 x 3.54 x 4.33 in)
EF24-1G-1Fm-SC-550M / EF24-1G-1Fs-SC-10 : 320g
EF24-1G-1SFP : 330g
DIN-Rail, Wall-Mount (optional kit)
9-48 VDC
Max. 0.3A @ 9VDC
Removable 5-pin Terminal Block
Present
10/100/1000Base-T(X) auto negotiation speed
100/1000BASE-(F)X or SFP Slot
PWR1, PWR2, CT-TML, F_Mode, Fx_Link, LLCF_ON, Test, Tx_LLCF, Fx_LLCF
Media Converter mode, Speed mode, Link Transparency, TS-1000 Terminal /
Center mode, Power Save, Fiber Auto Negotiation, Jumbo Frame, Cut-through
IEEE 802.3 for 10BASE T
IEEE 802.3u for 100BASE-T(X) and 100BASE-FX
IEEE 802.3ab for 1000BASE-T(X)
IEEE 802.3z for 1000BASE-X
Atop Technologies, Inc.
TEL : +886-3-5508137
FAX: +886-3-5508131
sales@atop.com.tw
http://www.atop.com.tw
Design and specification are subjected to change without notice.
All product names referenced herein are registered trademarks of their respective companies.
V2.0
Regulatory Approvals
Safety
CB
FCC Part 15, Subpart B, Class A
EN55032
EN 61000-3-2
EN 61000-3-3
EN 55024
Item
Contact Discharge
ESD
Air Discharge
RS
80-1000MHz
AC Power Port
EFT
DC Power Port
Signal Port
AC Power Port
AC Power Port
Surge
DC Power Port
Signal Port
CS
Conducted(Enclosure)
PFMF
DIP
(Enclosure)
AC Power Port
EMC
Test
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
Value
±6KV
±8KV
10 V/m
±2.0KV
±2.0KV
±1.0KV
Line-to Line±1.0KV
Line-to Earth±2.0KV
Line-to Line±1.0KV
Line-to Earth±1.0KV
3 Vrms
AC 50/60 Hz 10 A/m
-
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
Shock
Drop
Vibration
RoHS
MTBF
Warranty
Level
3
3
3
3
3
3
3
3
3
3
2
3
-
MIL-STD-810F Method 516.5
MIL-STD-810F Method 516.5
MIL-STD-810F Method 514.5 C-1 & C-2
Yes
415,681.88 hrs / 47.45 years (25°C)
5 years
Ordering Information
EF24-1G-1Fm-SC-550M
EF24-1G-1Fs-SC-10
EF24-1G-1SFP
Industrial Gigabit Ethernet-to-Fiber Media Converter, multimode, SC
connector, Link Fault Pass-Through, Auto Speed, 550 M
Industrial Gigabit Ethernet-to-Fiber Media Converter, single-mode, SC
connector, Link Fault Pass-Through, Auto Speed, 10 KM
Industrial Gigabit Fast Ethernet-to-Fiber Media Converter, Link Fault Pass-
Through, Auto Speed, SFP
Atop Technologies, Inc.
TEL : +886-3-5508137
FAX: +886-3-5508131
sales@atop.com.tw
http://www.atop.com.tw
Design and specification are subjected to change without notice.
All product names referenced herein are registered trademarks of their respective companies.
V2.0
Optional Accessories
APU10-108
APU11-108
WMK-315-Black
LM28-C3S-TI-N
LM38-C3S-TI-N
LS38-C3S-TI-N
LS38-C3L-TI-N
LM38-A3S-TI-N
LS38-A3S-TI-N
Y-Type power adaptor,100-240VAC input,0.41A @ 24VDC output, US plug
Y-Type power adaptor,100-240VAC input,0.41A @ 24VDC output, EU plug
Aluminum Wall Mount Kit, Black
SFP Transceiver, 1250Mbps, 850nmVCSEL, Multi-mode, 550m, 3.3V, -20~85C
SFP Transceiver, 1250Mbps, 1310nmFP, Multi-mode, 2km, 3.3V, -40~85C
SFP Transceiver, 1250Mbps, 1310nmFP, Single-mode, 10km, 3.3V, -40~85C
SFP Transceiver, 1250Mbps, 1310nmDFB, Single-mode, 30km, 3.3V, -40~85C
SFP Transceiver, 155Mbps, 1310nmLED, Multi-mode, 2km, 3.3V, -40~85C
SFP Transceiver, 155Mbps, 1310nmFP, Single-mode, 30km, 3.3V, -40~85C
Mechanical Dimensions
Atop Technologies, Inc.
TEL : +886-3-5508137
FAX: +886-3-5508131
sales@atop.com.tw
http://www.atop.com.tw
Design and specification are subjected to change without notice.
All product names referenced herein are registered trademarks of their respective companies.
V2.0