Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Temperature 150°C Ultra-Stable X8R Dielectric, 10 – 100 VDC (Commercial & Automotive Grade)
Packaging C-Spec Ordering Options Table
Packaging Type
Commercial Grade
1
Bulk Bag
7" Reel/Unmarked
13" Reel/Unmarked
7" Reel/Unmarked/2 mm pitch
2
13" Reel/Unmarked/2 mm pitch
2
7" Reel
13" Reel/Unmarked
7" Reel/Unmarked/2 mm pitch
2
13" Reel/Unmarked/2 mm pitch
2
1
1
Packaging/Grade
Ordering Code (C-Spec)
Not Required (Blank)
TU
7411 (EIA 0603 and smaller case sizes)
7210 (EIA 0805 and larger case sizes)
7081
7082
Automotive Grade
3
AUTO
AUTO7411 (EIA 0603 and smaller case sizes)
AUTO7210 (EIA 0805 and larger case sizes)
3190
3191
Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.
The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain
capacitors that have not been laser marked.
2
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
3
Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L” x W”) and thickness dimension. See “Chip Thickness/Tape & Reel
Packaging Quantities” and “Tape & Reel Packaging Information”.
3
For additional Information regarding “AUTO” C-Spec options, see “Automotive C-Spec Information”.
3
All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For
more information see “Capacitor Marking”.
Benefits
−55°C to +150°C operating temperature range
Lead (Pb)-Free, RoHS and REACH compliant
EIA 0402, 0603, 0805, 1206, 1210, and 1812 case sizes
DC voltage ratings of 10 V, 16 V, 25 V, 50 V and 100 V
Capacitance offerings ranging from 0.5 pF to 0.22 μF
Available capacitance tolerances of ±0.10 pF, ±0.25 pF,
±0.5 pF, ±1%, ±2%, ±5%, ±10%, and ±20%
• Extremely low ESR and ESL
• High thermal stability
• High ripple current capability
•
•
•
•
•
•
• No capacitance change with respect to applied rated DC
From "brick" mobile phones to bulky TVs, power modules once occupied a considerable space in electronic and electrical products, and the market demand for higher power density continues to increase.
I...
[i=s]This post was last edited by wo4fisher on 2018-9-30 22:58[/i] After sharing the previous posts, the communication protocol of modbus RTU and the use of modscan software for software simulation co...
[size=4]When making high-frequency power supplies, sampling of high-frequency AC signals is often involved. The traditional sampling circuit is as follows: [/size] [size=4] [/size] [align=center][size...
In the last issue, we have eliminated A. In this issue, we need to display the letters AB at the same time, which requires two lvgl tags. How to do it? I thought of the structure:
struct Obj{char name...
Recently, a simple car accident made the headlines. The general content was that a Land Rover rushed into a street coffee shop while parking. It was simple because there were no complicated doubts in ...
Whether it is the main pipelines for water supply, drainage, heating, gas supply in the city, long-distance oil and gas pipelines, or process pipelines in factories, they are all important equipmen...[Details]
In September this year, Samsung launched the ISOCELL HP1, the first mobile image sensor supporting 200 million pixels (200Mp), based on Samsung's 0.64μm technology. Last night, digital blogg...[Details]
At present, there are several main methods for generating terahertz lasers by optics: terahertz gas lasers; generating terahertz radiation by ultrashort laser pulse photoconductivity or optical rec...[Details]
1. The clock used in MCU supports 3 modes of clock 1. XOSC Pierce crystal oscillator and ceramic resonator connected to EXTAL and XTAL pins 2. An external oscillator is connected to the EXTAL inp...[Details]
1. Without a servo drive, there is no particularly good way. You can use a multimeter to measure the resistance between phases in pairs, which should be roughly equal. If you have an adjustable v...[Details]
1. Introduction to BootLoader
Running GNU/Linux systems on dedicated embedded boards has become increasingly popular. From a software perspective, an embedded Linux system can usually be divided i...[Details]
Recently, Anhui Province issued the "2019 Provincial Major Preliminary Work Project Promotion Plan", which announced a number of Anhui Province's integrated circuit project promotion plans for 2019. ...[Details]
Before learning how to use an oscilloscope to reduce noise, let's first understand where the oscilloscope noise comes from. Many people who have just switched from analog oscilloscopes to digital o...[Details]
Platform: mini2440 Compilation tool: ads1.2 LCD model: Sony 3.5-inch TFT LCD screen I started to work on the LCD driver at the end of last semester. It was almost the end of the semester and I ...[Details]
1 Overview
In the development and production of various communication equipment, there are strict requirements for the safety, efficiency, noise, volume and weight of AC/DC . The series AC/DC w...[Details]
According to Russian media reports, data from retailer M.Video-Eldorado showed that three of the five most popular mobile phones in Russia in the first half of 2019 were from the Honor brand. It is...[Details]
LIDAR (Light Detection and Ranging) is used for large-scale positioning, ranging and target profiling applications through radar. This system consists of a laser that can emit pulsed or continuous ...[Details]
The LTC®2633 is a family of dual 12-bit, 10-bit and 8-bit voltage output DACs with an integrated, high accuracy, low drift reference in an 8-lead TSOT-23 package. It has built-in rail-to-rail outpu...[Details]
The growing demand for portable electronic devices, electric vehicles , and large-scale smart grids has driven the rapid development of energy storage technology. Lithium-sulfur batteries are conside...[Details]
Transformer overheat protection circuit
Figure 4 Transformer overheat protection circuit
Figure 4 is a transformer overheat protection circuit, R3=R4, NTC is a negative temperature coeffici...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
