Description:
Anti-fatigue dissipative floor mat; homogeneous vinyl laminated to a unique super-
resilient, double-thick, rubber foam base. This static dissipative, diamond plate surface
offers a high-tech look while providing safe flooring with traction. Diamond plate surface
and tapered edges are adopted from industrial safety applications; it is a proven safety
and anti-fatigue product. Yellow safety border provide high visibility and alert employees
to ESD controlled areas.
Made in America
Side
Electrical Properties:
Property
Charge Decay:
Test Method
FTMS 101C, Method 4046
Value
5,000 volts-0 volts
in 0.03 seconds
10
8
ohms
10
8
ohms
Specifications:
Construction:
Thickness:
Surface:
Hardness:
Heat Resistance:
Weight:
Density:
Homogenous vinyl laminated to
dual-layer foam rubber
0.450" (11.4mm)
Embossed Diamond Plate Design
80 Shore A
32°F to 150°F continuous
1.45 lbs. per square foot
Average: 33 lbs. per cubic foot
RTT Resistance: ANSI ESD S7.1
RTG Resistance: ANSI ESD S7.1
Grey
Yellow
Electrical Properties obtained by testing to industrial standards by
an independent testing laboratory @ 100 Volts and 50% relative
humidity unless otherwise specified. Complete text of the test
report is available upon request.
Matting materials have a tendency to shrink slightly
when first unrolled. In applications where length is
critical, allow the material to relax for at least 4 hours
before cutting to size. Always trim with a sharp knife
or razor blade.
Color
Grounding Intervals for ESD Mats
Sufficient ground cords should be used to
reliably meet ANSI/ESD S20.20 Table 1 less
than 1 x 10E9 ohms for worksurfaces. An
industry recommendation has been that
continuous runs of ESD matting should be
grounded at ten-foot intervals to allow proper
charge decay rates with each individual ESD
mat should be grounded with ground snap
located no further than five feet from either end.
Grounding: This material must be properly grounded for optimum
electrical performance. Ask for Technical Bulletin TB-2000 for mat
grounding instructions.
Cleaning: For optimum electrical performance, surface must be
cleaned regularly using an ESD mat cleaner. We suggest using our
Reztore™ Surface & Mat Cleaner Item #10435 or Static Wipes
Item #10600. Do not use cleaners with silicone. Silicone buildup
will create an insulative film on the surface.
RoHS Compliance Statement
None of the following materials are intentionally added in
manufacturing this product: lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in the Directive 2002/95/EC
Article 4.1. See Desco Industries Inc. letter on-line at
Desco.com.
Grey with yellow stripe
Item No.
40975 Floor Mat
40976 Floor Mat
40977 Floor Runner
Size
36 "x 48"
36" x 60"
36" x 60'
Grey w/yellow
safety borders
Grey w/yellow
safety borders
Grey w/yellow
safety borders
Mats include our complete Floor Ground Kit Item #14234.
Rolls do not include hardware.
Disclaimer:
All statements, technical data, and
recommendations contained herein are based
upon tests we believe to be reliable. However,
the accuracy or completeness thereof is not
guaranteed. The proper and correct applications
of products and data is the responsibility of the
user. Statements or recommendations not
contained herein shall have no force or effect
unless embodied in a written agreement signed
by authorized offers of Desco Industries, Inc.
Tolerances:
Width ± .250"
Length ± .250" every 1 linear
foot of running material.
Look for the Statfree
®
brand on Desco ESD
matting. All Desco mat top
kits are permanently
marked for your protection
and auditing purposes.
Limited Lifetime Warranty
Desco warrants for one year that Statfree® matting products will be free of
defects in materials and workmanship and will guarantee dissipative/
conductive mat properties for the life of the mat. Damage to matting
caused by misuse of any kind, including using inappropriate cleaners is
not covered by Desco Limited Warranty.
STATFREE DPL™ FLOOR MAT, VINYL, DISSIPATIVE, ANTI-FATIGUE, 0.450 (11.4MM)
DESCO WEST:
3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST:
90 HUDSON RD, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
MATERIAL STATFREE DPL™
DRAWING PM-113
DATE:
2/06
© 2006 DESCO INDUSTRIES INC.
Employee Owned
京公网安备 11010802033920号
EEWORLD
