WizFi310 Datasheet
Version 1.0.0
http://www.wiznet.co.kr
© Copyright 2016 WIZnet Co., Ltd. All rights reserved.
WizFi310
WizFi310 is a small size wireless module for the highest level of integration,
featuring 802.11b/g and 802.11n.
It have onboard antenna, and external antenna interface, RF output PIN also exist in
the board.
WizFi310 internally integrated TCP / IP protocol stack, supporting numerous
protocols such as ARP IP ICMP TCP UDP DHCP CLIENT, DHCP SERVER, DNS and
, ,
,
,
,
other etc. It supports AP mode, Station mode. It also support rich AT commands for
most kinds of application needs. Users can easily and quickly use it on wifi networking
and data transmission. The baud rate of module serial port up to 921600bps, which
can fully meet on low-rate applications.
In networking part, WizFi310 supports network parameters storage in the module
that reduces time to connect to network. The module has built-in WEB server,
supporting wireless network parameters configuration and wireless firmware upgrade.
It also supports WPS. For application protocols, MQTT and SSL were supported in this
module.
For software and driver development, WIZnet provides extensive technical
documents and reference software codes for system integration.
2 / 16
WizFi310 Datasheet Version1.0.0 (OCT 2016)
Features
Application
-
UART serial AT command set operation
- Support for multiple baud rate
- Support wireless configuration and OTA firmware upgrade
- Support on fast networking application functions (WPS function)
- Support MQTT, GMMP, TLS applications protocols
Standards Supported
- 802.11b/g/n compatible WLAN
- Light Weight TCP/IP protocol
- WPA, WPA2, Open, shared key
- WPS support
WLAN MAC Features
- CMOS MAC, Baseband PHY, and RF in a single chip for 802.11b/g/n compatible WLAN
- Complete 802.11n solution for 2.4GHz band
- 72.2Mbps receive PHY rate and 72.2Mbps transmit PHY rate using 20MHz bandwidth
- 150Mbps receive PHY rate and 150Mbps transmit PHY rate using 40MHz bandwidth
- PHY- level spoofing to enhance legacy compatibility
- Power saving mechanism
WLAN PHY Features
- 802.11n OFDM
- One Transmit and one Receive path (1T1R)
- Short Guard Interval (400ns)
- DSSS with DBPSK and DQPSK, CCK modulation with long and short preamble
- Maximum data rate 54Mbps in 802.11g and 150Mbps in 802.11n
- Fast receiver Automatic Gain Control (AGC)
WizFi310 Datasheet Version1.0.0 (OCT 2016)
3 /
16
Block Diagram
4 /
16
WizFi310 Datasheet Version1.0.0 (OCT 2016)
Table of Contents
. Pin Assignment
................................................................................................................. 7
1.1
1.2
2.1
2.2
2.3
2.4
2.6
2.7
Pin Map
....
.......
.............................................................................. 7
.............................................................................. 8
Pin Description
Electrical Specification
..............
......................................................................................... 10
General specification
........................................................................ 10
802.11g Mode
................................................................................ 11
802.11g HT 20 Mode
........................................................................ 12
802.11g HT 40 Mode
....................................................................... 13
NVM specification ..........................
....................................................... 13
Power Consumption .......
................................................................... 14
Dimensions
.................................................................................................................... 15
Reference schematic
........................................................................................................ 16
WizFi310 Datasheet Version1.0.0 (OCT 2016)
5 /
16
京公网安备 11010802033920号
EEWORLD
