The
N-TRON
®
526FX2
Series Industrial Ethernet Switch offers
outstanding performance and ease of use. It is ideally suited for
connecting Ethernet enabled industrial and/or security equipment
and can be optionally configured with advanced Ethernet
communication management functions
PRODUCT FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Full IEEE 802.3 and 1613 Compliance
NEMA TS1/TS2 Compliance
American Bureau of Shipping (ABS) Type Approval
Twenty-Two 10/100 BaseTX RJ-45 Ports
Two 100BaseFX Ports, ST (shown) or SC
Extended Environmental Specifications
Auto Sensing 10/100BaseTX, Duplex, and MDIX
Store-and-forward Technology
Up to 2.6 Gb/s Backplane Throughput
Rugged Industrial DIN-Rail Enclosure
Redundant Power Inputs (10-30 VDC)
Bi-Color LED's For Link, Speed, Activity & Duplex Status
IGMP Snooping
VLAN
QoS
Trunking
Mirroring
N-View
TM
(Remote Monitoring Using OPC Technology)
Advanced Management Features (With -A option only):
Advanced Management Functions
The
526FX2-A
offers several management functions that can be
easily configured using the COM Port (DB 9 Connector located
on the right side of the switch).
IGMP Snooping
- Internet Group Management Protocol is a
feature that allows the
526FX2-A
switch to forward and filter
multicast traffic intelligently.
VLAN
- Virtual Local Area Network allows segmentation of the
switch in order to create two or more separate local area network
domains.
QoS -
Quality of Service provides prioritization of network traffic
in order to provide better network service. The primary goal of
QoS is to improve the latency of prioritized Ethernet packets
required for ring management, real-time and other interactive
applications.
Trunking -
Trunking (aggregation) enables multiple physical ports
to be linked together and function as one uplink to another
N-TRON
trunking capable switch configured in the same
manner, thereby increasing the bandwidth between switches.
This configuration can provide increased bandwidth and
redundancy to applications requiring high levels of fault
tolerant operation.
Port Mirroring -
This
526FX2
function allows the traffic on
one port to be duplicated and sent to a designated mirror port.
Port mirroring can be used to monitor Ethernet traffic on the
designated source port using the assigned mirror port.
N-View OPC Switch Monitoring (With -A or -N Option Only)
The
N-TRON
N-View OLE for Process Control (OPC)
server software can be combined with popular HMI software
packages to add network traffic monitoring, trending and
alarming to any application using
N-TRON
switches
configured with the N-View option.
N-TRON's
N-View OPC Server
collects 41 different traffic variables per port and 5 system level
variables per switch. This information can provide a complete
overview of the network load, service quality, and packet traffic.
OPC client software can use N-View OPC Server data to resolve
network problems quickly and improve system reliability.
Industrial Packaging and Specifications
The
N-TRON 526FX2
is designed to operate in industrial
environments. It is housed in a rugged steel enclosure
that can be DIN-RAIL or panel mounted, and an optional
rackmount kit is also available. The
526FX2
comes standard with
extended temperature rating, extended shock and vibration specs,
redundant power inputs, and a high MTBF (greater than 2M hours).
Ease of Use
The
N-TRON 526FX2
requires no setup unless the advanced
port functions are utilized. The Twenty-Four 10/100BaseTX
ports are auto sensing and auto configuring. Each copper port is
automatically negotiated for maximum speed and performance
by default. Bi-color LED's are provided to display the link
status, link speed and activity of each port as well as power
on/off status.
Performance
The
N-TRON 526FX2
uses "state of the art" IEEE 802.3
Fast Ethernet 10/100BaseTX switching technology. This
technology eliminates network collisions and increases
network determinism. Up to 4,000 MAC addresses are
supported enabling sophisticated and complex network
architectures. A high speed processor and backplane al-
lows wire speed capability on all ports simultaneously.
526FX2 Industrial Ethernet Switch Ordering Information
526FX2-A-XX-S
526FXE2-A-XX-YY
Where:
Twenty-four 10/100BaseTX Ports, Two Multimode 100BaseFX Fiber Optic Ports
Twenty-four 10/100BaseTX Ports, Two Singlemode 100BaseFX Fiber Optic Ports
A = A for Advanced Management Features,
or N for N-View, and Blank Otherwise, N-View included in -A;
XX = ST or SC, YY = 15, 40 or 80 for singlemode, blank for multimode
S = Standard Temperature Rating -20ºC to 70ºC, Blank for -40ºC to 85ºC
100 Mb Fiber Transceiver Characteristics
Fiber Length
TX Power Min
RX Sensitivity Max
Wavelength
526FX2-A Specifications
Switch Properties
Number of MAC Addresses:
4,000
Aging Time:
300s (programmable -A)
Latency Typ.:
2.1
μs
Backplane Speed:
2.6Gb/s
Switching Method:
Store & Forward
Case Dimensions
Height - 1U:
Width:
Depth:
Weight:
Electrical
Redundant Input Voltage:
Input Current:
Inrush:
Environmental
Operating Temperature:
-20
o
C to 70
o
C (Standard)
-40
o
C to 85
o
C (Extended)
2km*
-19dBm
-32dBm
1310nm
15km**
-15dBm
-29dBm
1310nm
40km**
-5dBm
-34dBm
1310nm
80km**
-5dBm
-34dBm
1550nm
Network Media
10BaseT:
100BaseTX:
100BaseFX
Multimode:
100BaseFX
Singlemode:
Connectors
10/100BaseTX:
* Multimode Fiber Optic Cable
** Singlemode Fiber Optic Cable
>Cat3 Cable
>Cat5 Cable
50-62.5/125μm
7-10/125μm
1.75" (4.5cm)
19"
(48.3cm)
4.2"
(10.6cm)
3.7 lbs
10-30 VDC
1A@24V
9.5Amp/0.75ms@24V
Twenty-Four (24) RJ-45
Copper Ports
100BaseFX:
Two (2) SC or ST Duplex Ports
Recommended Wiring Clearance
Front:
2" (5.08 cm)
Regulatory Approvals
FCC/CE (CFR 47, Part 15, Subpart B, Class A)
EMC Dir 89/336/EEC, EN 50204, EN 55011
EN61000-4-2/3/4/5/6/8/11, EN61000-6-2/4
ANSI C63.4, ICES-003
UL /cUL: Class I, Div 2, Groups A, B, C, D and T4A
UL 508 and UL 1604
CAN/CSA-C22.2 No.213, ATEX II 3 G Ex nA
ABS Type Approval for Shipboard Applications
GOST-R Certified, RoHS Compliant
Designed to comply with:
IEEE 1613 for Electric Utility Substations
NEMA TS1/TS2 for Traffic Control
Operating Humidity:
Operating Altitude:
Reliability
MTBF:
Shock and Vibration
Shock:
Vibration/Seismic:
Serial Configuration Port
Com Parameters:
10% to 95%
(Non Condensing)
0 to 10,000 ft.
>1 Million Hours
200g @ 10ms
50g, 5-200Hz, Triaxial
9600,n,8,1
Contact Information
N-TRON
Corp.
820 S. University Blvd., Suite 4E
Mobile, AL36609USA
TEL: (251) 342-2164
FAX: (251) 342-6353
Website: www.n-tron.com
Email: N-TRON_info@n-tron.com
N-TRON
Europe GmbH
Alte Steinhauserstr 19
6330 Cham / Zg Switzerland
TEL: +41 41 7406636
FAX: +41 41 7406637
REV 090804
® 2009
N-TRON
, Corp.
, N-TRON
and the
N-TRON
logo are trademarks of
N-TRON
, Corp. Product names mentioned herein are for identification purposes only and
may be trademarks and/or registered trademarks of their respective company. Specifications subject to change without notice.
The responsibility for the use and application
of
N-TRON
products rests with the end user.
N-TRON
makes no warranties as to the
fi
tness or suitability of any
N-TRON
product for any specific application.
N-TRON
Corporation
shall not be liable for any damage resulting from the installation, use, or misuse of this product.
Printed in USA.
京公网安备 11010802033920号
EEWORLD
