Non EMC DIN-Based VectorPak
tm
Subracks
Vector subrack packaging for 19”
systems offers a versatile and com-
prehensive solution to your packag-
ing needs. Based on DIN 41914,
all parts conform to a system which
allows your unique design to be
constructed from a combination of
standards. You may mix different
module sizes and add accessories
without the need for special
designs. Subracks and accessories
are available “off the shelf”, afford-
ing you short lead times for on time
completion of your project.
COMPLETE DIN SUBRACKS FULLY ASSEMBLED OR KITS
CCK
Card Cage (subrack) frame only kit including sidewalls, front, rear and rear-center extrusions, all
nut strips, backplane insulators and assembly instructions. CG1-series VectorPak
tm
card guides sold
separately. Guide positions are variable at 1HP (0.200”) horizontal increments.
CCA
Card cage (subrack) frame only described above , but factory assembled.
CG1-series VectorPak
tm
card guides sold separately
NON EMC
Subracks
DIN-Based Metric Subrack Ordering Information
CCK
-
160
3U
Rack Height
Model Type
CCK-
Card cage frame kit
CCA-
Factory Assembled
VectorPak
tm
Kit (CCK)
Card Depth
160 -160mm, 6.299”
220 -220mm, 8.66”
280- 280mm, 11.02”
340- 340mm, 13.39”
400- 400mm, 15.75”
3U = 5.25”H x 19.0”W
6U = 10.50”H x 19.0”W
9U = 15.75”H x 19.0”W
Standard Card Heights
3U = 100mm (3.94”)
6U = 233.35mm (9.187”)
9U = 366.70mm (14.437”)
CCA160-6U shown with 1 pr. of
CG1-160 card guides installed
CCA160-3U shown with 1 pr. of
CG1-160 card guides installed
34
www.vectorelect.com
Specification subject to change without notice
800-423-5659
Non EMC DIN-Based VectorPak
tm
Subracks
ALL VECTORPAK
TM
19” DIN SUBRACK COMPONENTS AVAILABLE SEPARATELY
AC160-84-1 Perforated Covers
AC160-84-2 Solid Covers
Insulator 5250998-84
DP Dress Panels
Rear Extrusion
5250238-84
Rear Center Extrusion
5250237-84
CG1-160
Card Guides
5700202 or 5250268-84
Nut Strip
HA19
Rack Handles
Front Extrusion
5250236-84
Side Panel
NON EMC
Subracks
Part No.
5250236-84
5250238-84
5250237-84
5250268-84
or 5700202
5250268-84
5250998-84
Description
DIN Front horizontal Extrusion
DIN Rear horizontal Extrusion
DIN Center horizontal Extrusion
M2.5 Nut Strip, 17.0”
AS1/2
M2.5 Nut Strip, cut less than 17.0” in 0.20” increments 1HP)
Backplane Insulation Strip, 17.0”
AS1/2
The above items are available in 0.800” (4HP) to 17.0” (84HP) and
attach to VectorPak
tm
sidewalls (Page 38) with 8-32 screws (HD94)
Attractive & Rugged Outer Enclosures
Available for 3U, 6U or custom subracks
Accepts up to 19” wide subracks with rackmount brackets.
Many choices of paint colors - Contact factory.
SE1588
4U for 8.4”W Subrack
SE1422 3U x 14”D
for 19”W Subrack
SE1588 with VectorPak
tm
CCA26 and CG3 card guides
www.vectorelect.com
SE1322
3U x 22”D for 19”W Subrack
Specification subject to change without notice
800-423-5659
35
Non EMC DIN-Based VectorPak
tm
Subracks
Card Guides
Specially designed card guides provide easy installation and repositioning,
without special tools. Material is 5% glass-filled polycarbonate. Package
contains 12 guides. Secure installation by spring loaded retainer ledge on
front rail extrusion and vertical insertion into rear extrusion holes.
Part No.
CG1-160/12
CG1-220/12
CG1-280U/12
CG1-340U/12
CG1-400U/12
Description Card Thick
160mm
220mm
280mm
340mm
400mm
.062”
.062”
.062”
.062”
.062”
Description
Polycarbonate injection molded
Polycarbonate injection molded
Polycarbonate/Black anodized aluminum
Polycarbonate/Black anodized aluminum
Polycarbonate/Black anodized aluminum
P/N CG1-160 and CG1-220 card
guides are injection molded
Installation/removal of
guides from front strut
Polycarbonate end pieces with
anodized aluminum
“U” type
Handles
Black Anodized Aluminum handles for 3 and 6 subracks.
(Mounting hardware included).
Dress Panels
Dress panels provide an attractive, finished look for Vector Card Cages
and are required when adding handles. Mounting hardware included.
Brushed Aluminum with clear irridite finish.
Non EMC
Subracks
Part No.
HA19-3U
HA19-6U
HA19-9U
Pkg. Qty
2
2
2
Description
Handle for 3U subrack
Handle for 6U subrack
Handle for 9U subrack
Part No. Pkg. Qty
DP-3U
DP-6U
DP-9U
2
2
2
Description
For 3U Subrack, 5.25” high X 1.10” wide
For 6U Subrack, 10.50” high X 1.10” wide
For 9U Subrack, 15.75” high X 1.10” wide
Top/Bottom Covers
These aluminum panels provide maximum protection for cards and
are available in perforated (AC160-84-1) or solid (AC160-84-2).
Covers slide easily into DIN extrusion grooves and can be added or
removed at any time, no hardware needed. Made of brushed alu-
minum with clear irridite finish.
Part No.
AC160-84-1,
AC220-84-1,
AC280-84-1,
AC340-84-1,
AC400-84-1,
*
2
2
2
2
2
Pkg Qty Width
2
2
2
2
2
16.98”
16.98”
16.98”
16.98”
16.98”
Depth
4.93”
7.29”
9.65”
12.01”
14.37”
For Card Size
160mm
220mm
280mm
340mm
400mm
*
substitute -1 with
-2 for solid covers
VectorPak
tm
powered subrack
with VME J1/J2 backplane and integrated fans
Specification subject to change without notice
36
Specification subject to change without notice
www.vectorelect.com
Note: 1” = 25.4mm, 1U = 1.75”
800-423-5659
DIY/Open Source Hardware
京公网安备 11010802033920号
EEWORLD
