1. If you want to use NDK, the CCS project you create must be a project that runs sys/bios.2. If you want to see the network demo of 6678, the demo path is: C:\ti\mcsdk_2_01_02_06\examplesdk\helloWorl...
TUSB9261 is a USB 3.0 to SATA interface bridge chip from TI. The related reference materials are as follows: During use, because the SPI flash needs to be programmed, it involves certain steps. Many p...
Ask for advice:I am currently working on a 64-channel acquisition board. The input is first connected to a voltage follower (OPA4187), and then through a two-stage analog switch (MUX508), it is input ...
Even embedded lighting engineers can’t do this.
I used to play with stm32, and imported the header file and c file of the TMS320 library according to the stm32 routine.
But there seems to be no way to...
[size=5]In MSP430G2xx, there is actually a ROM version of BSL (Bootloader), but this BSL only supports online upgrades of external MCUs through UART, and all protocols are fixed and cannot be modified...
Detailed explanation of ADS application - RF circuit design and simulation
This is a detailed information
Circuit design, simulation and PCB design - from analog circuits, digital circuits, RF circuit...