JJH SERIES
–
DETECTOR SWITCHES
Telecommunications
RoHS Compliant
White goods
Instrumentation
Automotive
Applications
JJ Series
–
Detector Switches
Benefits
Compact Size
Sharp detection
feeling
Halogen and Lead
Free
TE Connectivity is pleased to introduce its JJ Series of Detector Switches, suitable
for a wide variety of applications given their several presentations ranging from
horizontal or vertical actuated options as well as Gull-winged, J-leaded and
Through-Hole mounting possibilities.
The Detector Switches will be offered in a wide range of sizes giving the possibility
for countless applications going from automotive to telecommunications.
JJ Series
–
Family Classification
Series
JJA
JJB
JJC
JJD
JJE
JJF
JJG
JJH
JJI
JJJ
JJK
JJL
JJM
JJN
JJO
JJP
Body Size
3.5x2.8 mm
3.5x2.98 mm
3.5x3.3 mm
4.2x3.6 mm
4.7x3.5 mm
4.7x3.8 mm
5.7x4.0 mm (High-Rating)
5.7x4.0 mm (Standard-Rating)
5.0x4.4 mm
6.0x4.85 mm / 5.5x4.7 mm
6.3x3.0 mm
6.5x3.9 mm
5.7x4.0 mm
5.7x4.0 mm (Wedge)
10.0x3.8 mm
10.6x10.0 mm
2331390-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone or
live chat, go to:
www.te.com/help
JJH SERIES
–
DETECTOR SWITCHES
JJH Family
–
5.7x4.0 mm (Standard-Rating)
Contact Rating
Contact Resistance
Insulation Resistance
Dielectric Strength
Operating Force
Travel
Operating Life
Operating Temperature
Storage Temperature
10mA, 5VDC
1Ω Max.
MΩ
Min. 100VDC
100VAC/1 minute
150gF Max.
2.0mm
100,000 cycles
-
˚C to 8 ˚C
-
˚C
to
8 ˚C
Features
•
•
•
Easy orientation offered by guiding post.
Ultra-low profile with 2.0mm.
NO and NC circuit availability.
Applications
•
•
•
•
Notebooks.
Detection of car audio mechanisms.
Smoke detectors.
Industrial application.
Circuit
How To Order
2331390-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone or
live chat, go to:
www.te.com/help
JJH SERIES
–
DETECTOR SWITCHES
1. Style
Detector “witches are
mainly used as signal switches of electric devices, with the general
requirements of mechanical and electrical characteristic.
1.1 Operating Temperature Range: -40℃ to 85℃
1.2 Storage Temperature Range: -40℃ to 85℃
1.3 The shelf life of product is within 6 months.
2. Current Range:
10mA, 5 VDC
3. Type of Actuation:
Momentary
4. Test Sequence:
Item
Appearance
1
Description
Visual
Examination
Test Conditions
Physical inspection without
applying any external forces.
Requirements
There shall be no defects
that affect the
serviceability of the
product.
2
Contact
Resistance
Actuate the switch and measure contact
resistance using a micro-Ohmmeter.
1Ω
Max.
Electric
Performance
3
Insulation
Resistance
Measurements shall be made at 100 VDC
potential between terminals and cover.
MΩ
Min.
4
Dielectric
Withstanding
Voltage
100 VAC (50Hz or 60Hz) shall be applied
across terminals and cover for 1 minute
There shall be no
breakdown or flashover
2331390-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone or
live chat, go to:
www.te.com/help
JJH SERIES
–
DETECTOR SWITCHES
5
Operating
Force
Contact
(On) point
As the specification shows
operating force is measured
--------------------------
150gF Max. (1.5N Max.)
As the specification shows
ON start position
6
7
Stop
Strength
1) Operation direction: 0.5KgF static
operation force applies on the center
of the actuator for 15 seconds.
2) Non-operation direction: 0.1KgF
static operation force applies on any
direction for 15 seconds.
1) As shown in item 2 to 7.
8
Solder Heat
Resistance
(See chart below)
1) Shall be free from
pronounced backlash and
falling-off or breakage
terminals
2) As shown in item 2 to 7
Mechanical
Performance
9
Vibration
Test per Method 201A of MIL-STD-202F
1) Swing distance=1.5mm
2) Frequency: 10-55-10Hz in 1-
min/cycle.
3) Direction: 3 vertical directions
including the directions of operation
4) Test time: 2 hours each direction
Test per Method 213B condition A of
MIL-STD-202F
1) Acceleration; 50G
2) Action time:11±1m seconds
3) Testing Direction: 6 sides
4) Test Cycle: 3 times in each direction
Tested as follows:
1) 1mA,5 VDC resistive load
2) Apply a static load in the direction of
operation equal to the operating force
to the center of the stem.
3) Rate of Operation: 15 operations per
minute.
4) Cycle of Operation: 100,000 cycles
Min.
1) As shown in item 2 to 7.
10
Shock
1) As shown in item 2 to 8.
11
Operating
Life
1) As shown in item 4 to 5
2) Insulation Resistance:
100MΩ
Min.
) Contact Resistance: Ω
Max.
2331390-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone or
live chat, go to:
www.te.com/help
京公网安备 11010802033920号
EEWORLD
