Technical Data Sheet
Adaptor
RPC-7 – SMA jack
07P132-K00S3
Dieses Dokument ist urheberrechtlich geschützt
●
This document is protected by copyright
●
Rosenberger Hochfrequenztechnik GmbH & Co. KG
All dimensions are in mm; tolerances according to ISO 2768 m-H
Interface
RPC-7 according to
SMA according to
SMA mechanically compatible with
IEC 457-2
IEC 60169-15; EN 122110; MIL-STD-348A, Fig. 310
RPC-2.92 and RPC-3.50
Documents
N/A
Material and plating
Connector parts
Center contact
Outer contact RPC-7
Outer contact SMA
Coupling nut
Dielectric 1
Dielectric 2
Material
CuBe
CuBe
Stainless steel
Stainless steel
PPE
PTFE
Plating
Gold, min. 1.27 µm, over chemical nickel
Gold, min. 1.27 µm, over chemical nickel
Passivated
Passivated
RF_35/09.14/6.2
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Email : info@rosenberger.de
Page
1/2
Technical Data Sheet
Adaptor
RPC-7 – SMA jack
Electrical data
Impedance
Frequency
Return loss
Insertion loss
Insulation resistance
Test voltage
(at sea level)
Working voltage
(at sea level)
RF-leakage
07P132-K00S3
50
Ω
DC to 18 GHz
≥
23 dB, DC to 18 GHz
≤
0.1 x
f(GHz)
dB
≥
5 GΩ
1000 V rms
480 V rms
≥
90 dB up to 1 GHz
Dieses Dokument ist urheberrechtlich geschützt
●
This document is protected by copyright
●
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Mechanical data
Mating cycles RPC-7
Mating cycles SMA
Center contact captivation
Coupling test torque RPC-7
Recommended torque RPC-7
Coupling test torque SMA
Recommended torque SMA
≥
5000
≥
500
≥
28 N
1.95 Nm
1.36 Nm
1.70 Nm
0.80 Nm to 1.10 Nm
Environmental data
Temperature range
Thermal shock
Corrosion
Vibration
Shock
Moisture resistance
RoHS
-40°C to +85°C
MIL-STD-202, Meth. 107, Cond. B
MIL-STD-202, Meth. 101, Cond. B
MIL-STD-202, Meth. 204, Cond. D
MIL-STD-202, Meth. 213, Cond. I
MIL-STD-202, Meth. 106
compliant
Tooling
N/A
Suitable cables
N/A
Weight
45.5 g/pce
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
Draft
Herbert Babinger
Date
05.08.04
Approved
F. Reiner
Date
20.06.18
Rev.
b01
Engineering change number
18-1026
Name
M.Ruf
Date
20.06.18
RF_35/09.14/6.2
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Email : info@rosenberger.de
Page
2/2