Color: Black Body, Cover – White & Color (see Table 1)
Contact
Underplating: 1.27-2.54
μm
[50-100
μ”]
Nickel
Material: Copper Alloy
Plating
Wire Accomodation:
Copper Alloy, 7-19 Bare and Tinned Strands, 0.14-0.50 mm
2
, 20-26 AWG
Wire Insulation:
Flexible Vinyl, Semi-Flexible Vinyl, Polyethylene, X-Linked Polyethylene, or PTFE
For approved cables contact your local sales representative
Marking: 3M Logo, Position Indicator, Wire Gauge, Insulator Material
Wiping Area: 0.2
μm
[8
μ”]
Minimum Gold with Lubricant
IDC:
2.0-7.62
μm
[80-300
μ”]
Matte Tin
Electrical
Current Rating:
Voltage Rating:
Insulation Resistance:
Withstanding Voltage:
3.0 Amps
32 Volts
>1x10
6
Ω
at 600 V
DC
1000 V
RMS
at Sea Level
Environmental
Temperature Ratings:
-20
o
C to 85
o
C
UL File No: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M and Scotchlok are trademarks of 3M Company.
For technical, sales or ordering information
call your local sales representative
3M™ Mini-Clamp II Plug
Designed for Wiring Supplied from Europe and North America
2mm, IDC, Wiremount
371
Series
# Positions
3
4
Dim A
12.9 [.51]
14.9 [.59]
Wire OD
Part #
0.25-0.50 mm
2
20-24 AWG
Cover Color
Part #
0.14-0.25 mm
2
24-26 AWG
Cover Color
1.6 ~ 2.0
[.063~.079]
A206
Gray
Table 1
1.2 ~ 1.6
[.047~.063]
A165
Blue
B163
Orange
1.0 ~ 1.2
[.039~.047]
A124
Green
B122
Yellow
0.8 ~ 1.0
[.031~.039]
mm
[inch]
Tolerance Unless
Noted
.0
mm ±.1
.00
±.10
B101
Red
[ ] Dimensions for
Reference Only
Ordering Information
371XX-XXXX-00E-MB
Positions
03 or 04
Wire AWG & OD:
2
AXXX = 0.25-0.50 mm
20-24 AWG
2
BXXX = 0.14-0.25 mm
24-26 AWG
Wire OD – see Table 1
TS-2233-D
Sheet 2 of 2
Note: Terminate using common pliers or 3M
TM
Scotchlok
TM
Crimping Tools E-9BM or E-9E
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M and Scotchlok are trademarks of 3M Company.
For technical, sales or ordering information
call your local sales representative
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part
does not
contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-D
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
[i=s]This post was last edited by elec32156 on 2020-4-19 16:33[/i]The figure shows 74HC165 shift registers, which are connected in series. One is 8 bits, and two can achieve 16-bit data output (ultima...
[i=s]This post was last edited by elec32156 on 2020-2-18 10:54[/i]As shown in the following PMOS switch circuit, there are some unclear points during the switching process:
1) After the transistor is ...
The latest Processor SDK released by C6678 provides source code, RTSC configuration file (.cfg) and a CCS project creation script, but does not directly provide a CCS project. For example, the file st...
Last time, we mentioned that the display part led by GD32F350 and 1.8-inch TFT has already appeared. Now we are about to welcome the last of the three giants. Who is it? It is the ESP8266 module that ...
I finally received the development board today, and I can’t wait to open it and take a look:As for the hardware, it is very exquisitely made. I am surprised that such a small box can be equipped with ...
[color=#323232][font=myFont, "][size=14px]Mao Hongliang's Voice Community[/size][/font][/color] [color=#323232][font=myFont, "][size=14px]I have been working on single boards for 11 years. Although I ...
Last week, news broke that Apple might offer a hardware subscription service. Specifically, Apple plans to offer hardware such as the iPhone as a subscription service, with users paying a monthly f...[Details]
The US government has always been very concerned about the risks that Huawei's 5G equipment may bring, and has been calling on its allies not to allow the company to join the deployment of 5G network...[Details]
The high-voltage isolated differential probe adopts a new circuit, high impedance and low capacitance input, and the collected data are processed by the integrated block, which can completely and t...[Details]
The first question is about existing lighting sources and solid-state lighting. Electric lighting has been used since the 19th century, especially since Edison invented white paper in 1879. Electric l...[Details]
According to blogger Kang's previous news, iPhone 12 models may support "Smart Data Mode", which means seamless switching between 4G and 5G. And the process is fully automatic and the whole process w...[Details]
Acidity meter is a kind of teaching instrument, which is composed of two parts: electrode and electric meter. If the electrode can be properly maintained, the standard buffer solution can be prepare...[Details]
Introduction to Velcro Fatigue Tester The Velcro fatigue tester is a part of the Velcro performance test. It measures the shear strength and peel strength by separating the loop and hook surfaces a c...[Details]
An oscilloscope is an electronic measuring instrument with a wide range of uses. It can transform invisible electrical signals into visible images, making it easier for people to study the changing p...[Details]
Zuosi Auto R&D released the "2022 Automotive Vision Sensor (CIS) Chip Industry Research Report". We know that the largest application market for image sensors is in the field of smartphones. As th...[Details]
According to the unidirectional conductivity of the diode, a good diode has a small forward resistance and a large reverse resistance. The larger the difference between these two values, the better. ...[Details]
Nearly half of all embedded designs use FPGAs, second only to microcontrollers. FPGAs can be used to perform anything from glue logic to custom IP to compute-intensive algorithm accelerators. FPGAs...[Details]
Motors are the electrical components that electricians come into contact with most in their daily work. During daily maintenance and installation, how to quickly detect the quality of a motor and w...[Details]
Function of
the circuit
Commonly used diodes have a forward voltage drop and cannot rectify small signals. When the signal amplitude is large, if the ambient temperature rises, the...[Details]
Sydney, Australia and Irvine, California, USA, October 23, 2024 -
Morse Microelectronics, a leading global provider of Wi-Fi HaLow solutions, today announced that it has won the "Best Wi-Fi Inn...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
