time for high efficiency, high forward surge current for use in high-
frequency inverters, freewheeling and polarity protection application.
Mechanical Data
Case: PowerDI5
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin Annealed over Copper Leadframe.
Solderable per MIL-STD-202, Method 208
Weight: 0.096 grams (Approximate)
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Top View
Bottom View
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
Ordering Information
(Note 4)
Part Number
PDU340-13
Notes:
Compliance
Commercial
Case
PowerDI5
Packaging
5,000/Tape & Reel
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
U340
YYWWK
U340 = Product type marking code
= Manufacturers’ code marking
YYWW = Date code marking
YY = Last digit of year ex: 06 for 2006
WW = Week code 01 to 52
K = Factory Designator
PowerDI is a registered trademark of Diodes Incorporated.
这是一个MSP430与MMC/SD卡接口设计,提供纯源代码。真正DIY设计!由Rolf Freitag先生提供。
原文:A self documenting project (C source code) for reading/writing on MMC/SD cards in spi mode and with a hello world LED as output. The code wo...
The main purpose of sharing it here is to give everyone a broad understanding of the burning program.The development board does not have BootLoader burning (when there is nothing in the flash, or uboo...
Basic circuit: Generally, DC stabilized power supplies use 220V mains electricity as power supply, which is then transmitted to the voltage stabilization circuit for voltage stabilization after voltag...
[i=s]This post was last edited by hujj on 2019-5-21 13:04[/i] [align=left][b][color=#000000]1. Project name:[/color][/b][/align][align=left][color=#000000] Home infrared intelligent alarm device[/colo...