According to the tutorial, build the development environment and serial port routine test.1. Download the software1.1 Development board resources
Download address: RVB26011.2. USB to TTL driverUSB to ...
I want to use CD4051 to switch 10V voltage. My control is 5V, but CD4051 needs 7V for high level when VDD=10V, so I use CD4504B to convert the level. I don't know if there is a better chip than CD4051...
# Lichee RV 86 PANEL Review (3) - Building a cross-compilation chain under WSL single system## Why download cross-compilation tools? The compilation tool chain on the PC is gcc, ld, objcopy, objdump, ...
When I first started learning DSP, the most troublesome thing was the DSP bootload problem. When I was learning 51 before, as long as the program was written and compiled, I could use the burner to bu...
When making a board for medical equipment, TPS5430 (switching frequency 500KHz) was used as a step-down chip. During the layout, this part of the circuit was located on the edge of the board.
I am wor...