WIREMOLD
®
Steel Raceway
Large Capacity, Two-Piece Steel Surface Raceway
6000
®
Series Raceway can be used divided for separate
wiring circuits or multi-service applications. For large
cabling installations, 6000 can be used undivided as
headers and feeders or to bring wiring to a specified
location. 6000 Series Raceway is ideal for all applications
requiring a high cable capacity, dual service steel
raceway. Commercial, institutional, and industrial
applications all benefit from the 6000 Series rigid steel
construction and durable Ivory ScuffCoat
™
finish. 6000
Series Raceway is also ideal for municipalities that require
either all steel construction or prohibit nonmetallic cable
management systems.
6000
®
Series Raceway shown as a divided system with Activate inserts
and power device with a 4050 device bracket.
FEATURES & BENEFITS
n
Steel raceway.
Provides superior strength for any dry
interior location installation.
n
Extra large cross sectional area.
Provides space for large
wiring requirements or installations that use large diameter
cable for power and/or data/communications.
n
Dividable raceway base.
Snap-in divider creates two-
compartment raceway. For bringing large amounts of power
and data/communications cable to one location.
n
Complete line of fittings.
Provides complete wiring solution
and allows for interconnection between raceway systems.
n
Gray baked enamel and Ivory ScuffCoat finish.
Enamel
finish assures durability; can be easily overpainted. Durable
Ivory Scuffcoat finish makes a scratch resistant surface.
n
Installs as a feeder or header raceway.
Ideal for overhead,
open spaces and underfloor applications.
n
Accommodates large size devices.
Large size raceway
accepts single- and dual-gang devices up to 100 amps and
circuit breakers up to three pole.
n
Pre-cut covers for standard outlet center locations.
For
mounting devices on various centers without cutting the
Download this product’s PEP ecopasport®
environmental product declaration at
www.legrand.us/resources-and-downloads.
This declaration conforms with ISO 14025 and
14040 and is in alignment with EN 15804.
n
n
n
n
covers which reduces number of field cuts for labor savings.
Base and cover cutters.
Manually operated cutters are
lightweight and portable. Cutters offer labor savings for any
size job and maintain a factory clean and square cut.
Communication connectivity options.
Accepts industry
standard and proprietary devices from a wide range of
manufacturers to provide a seamless and aesthetically
pleasing interface for voice, data, audio, and video
applications at the point of use.
ADA compliant.
Raceway and fittings can be installed in
conformance with ADA requirements.
UL Listed and CSA Certified.
Raceway UL file E4376 Guide
RJBT, CSA file LR350. Fittings UL file 41751 Guide RJPR,
CSA file 350 and 48952.
4047 Series Faceplates accommodate a wide range of power and
communications applications.
ED530R18 – Updated April 2017 – For latest specs visit www.legrand.us/wiremold
6000 Series Raceway System Layout
G6046KD
G6017TX
G6014A
G6007C-1
G6017TX
G6007C-2
G6011TX
G6010B
G4050
NOTE: Illustration is for showing single service product application only.
6000 Raceway Wire Fill Capacity for Power
NUMBER OF CONDUCTORS (40% FILL)
WIRE SIZE
THHN/THWN
14 AWG
12 AWG
10 AWG
8 AWG
6 AWG
4 AWG
3 AWG
2 AWG
1 AWG
1/0 AWG
2/0 AWG
inches
0.111
0.130
0.164
0.216
0.254
0.324
0.352
0.384
0.446
0.486
0.532
O.D.
(mm)
(2.8)
(3.3)
(4.2)
(5.5)
(6.5)
(8.2)
(8.9)
(9.8)
(11.3)
(12.3)
(13.5)
WITHOUT DEVICES
UNDIV.
659
481
303
174
126
77
65
55
40
34
28
DIVIDED
296
216
136
78
56
34
29
24
18
15
12
WITH DUPLEX
RECT. DEVICES
1.59 in.
2
(1025mm
2
)
UNDIV.
DIVIDED
528
231
385
243
140
101
0
0
0
0
0
0
168
106
61
44
0
0
0
0
0
0
WITH SURGE/
GFCI DEVICES
2.30 in.
2
(1485mm
2
)
UNDIV.
DIVIDED
470
202
342
216
124
89
0
0
0
0
0
0
147
92
53
38
0
0
0
0
0
0
LARGE SINGLE
RECEPTACLES
3.00 in.
2
(1935mm
2
)
UNDIV.
DIVIDED
412
173
300
189
109
78
0
0
0
0
0
0
126
79
45
33
0
0
0
0
0
0
NOTE: For additional information, refer to the Technical Section of ED1560 (Product Guide).
6000 Raceway Cable Fill Capacities for Data/Communications
CABLE
TYPE
UNSHIELDED
TWISTED PAIR
CATEGORY / DESIGNATION
4-pair, 24 AWG Cat 3
4-pair, 24 AWG Cat 5e
4-pair, 24 AWG Cat 6
4-pair, 24 AWG Cat 6a*
25-pair, 24 AWG Cat 6
2-pair, 24 AWG
3-pair, 24 AWG
4-pair, 24 AWG
25-pair, 24 AWG
RG58/U
RG59/U
RG62/U
RG6/U
100 Ohm
TYPE 1
TYPE 2
TYPE 3
Mini ZipCord
ZipCord
Round 4 Strand Fiber
Round 6 Strand Fiber
Inches
0.190
0.210
0.250
0.354
0.410
0.140
0.150
0.190
0.410
0.195
0.242
0.242
0.270
0.330
0.390
0.465
0.245
O.D.
(mm)
(4.8)
(5.3)
(6.3)
(9.0)
(10.4)
(3.6)
(3.8)
(4.8)
(10.4)
(5.0)
(6.1)
(6.1)
(6.9)
(8.4)
(9.9)
(11.8)
(6.2)
DIVIDED
40% FILL
101
83
58
29
21
187
163
101
21
96
62
62
50
33
24
16
61
232
103
104
55
UNDIVIDED
40% FILL
225
184
130
65
48
415
362
225
48
214
139
139
111
74
53
37
135
516
230
233
124
TELEPHONE
COAXIAL
TWINAXIAL
SHIELDED
TWISTED PAIR
FIBER
0.079 x 0.157 (2 x 4)
0.118 x 0.236 (3 x 6)
0.187
(4.8)
0.256
(6.5)
NOTE: Capacity range is calculated at 20% to 40% of raceway area as stated in a proposed revision to the Commercial Building Standard
for Telecommunication Pathways & Spaces, TIA/EIA-569. Actual wire fill capacity may vary based on applications, cable types, and
number, as well as type of fittings. (Fitting may cause additional variances to the fill capacity.)
* Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.
2
6000 Series Raceway Ordering Information
Catalog No./Item
V6000B-10
G6000B010
3 9/16"
(90mm)
Description/Specifications
Base –
.060" (1.5mm) galvanized
steel. Packed two 10' (3m) lengths
per carton. Base has two 9/32"
diameter trade size KOs 1 1/4"
(32mm) from each end and on
centers of approximately
18" (457mm) throughout.
Catalog No./Item
6001A
3 5/16"
(84mm)
2 1/2"
(64mm)
Description/Specifications
Coupling
– For joining lengths
of 6000B.
4 3/4"
(121mm)
G6000WC
Cover
– 040" (1.0mm) galvanized
steel. Packed four 5' (1.5m)
per carton.
1 1/2"
(38mm)
V6000C*
G6000C*
Wire Clip
– For holding conductors
in place. Use only with undivided
6000 Series Raceway.
2 3/8"
(60mm)
G6001DA
†
3"
4 3/4"
(121mm)
(76mm)
G6000DA**
3 1/4"
(83mm)
Divider –
.040" (1.0mm)
galvanized steel. One side painted
buff primer to provide identification
of compartments. Packed four 5'
(1.5m) lengths per carton.
2 7/8"
(73mm)
Divider Clip
– For holding G6000DA
Divider in place to divide raceway
into 1/3, 1/2, or 2/3 compartments.
6000 Raceway divided into
1/3 compartments will not
accept devices.
G6001TX
3"
(76mm)
Converter Coupling
– For converting
6011TX or 6017TX into a tee or cross.
For tee, one required; for cross,
two required.
660B
Base Cutter
– Portable base
cutter. Steel constructed provides
clean and easy square cuts.
Manual operation required.
G6008A
6 7/8"
(175mm)
660BDK
Replacement Blade Kit
–
Replacement blade and die
set for 640B Cutter.
7 7/8"
(200mm)
640C
Cover Cutter
– Portable cover
cutter. Steel constructed
provides clean and easy square
cuts. Manual operation required.
C-Hanger
– For suspending 6000 or
4000 Raceway from structural ceiling.
Designed for use with 3/8" (9.5mm)
rod. Hangers should be installed no
more than 4' (1.2m) apart along
raceway run. Can be bolted back-to-
back for dual runs of 4000, 6000, or
to a G3008C for combined runs with
3000 Raceway.
Pre-Cut Cover 7.5" (191mm) –
For mounting devices on 12"
(305mm) centers with 4047 Series
Cover Plates.
V4000C075/
G4000C075*
640CDK
Replacement Blade Kit
–
Replacement blade and die
set for 640C Cutter.
Spray Paint
– Used for touching
up large areas. Contains 12 oz.
of paint.
NOTE: Can only be shipped via
ground transportation.
IWE-S
GWE-S
V4000C135/
G4000C135
Pre-Cut Cover 13.5" (345mm) –
For mounting devices on 18"
(457mm) centers with 4047 Series
Cover Plates.
V4000C195/
G4000C195
IWE-P
GWE-P
Touch-Up Paint Pen
– Used for
touching up small areas.
Contains 0.3 oz. of paint.
Pre-Cut Cover 19.5" (495mm) –
For mounting devices on 24"
(610mm) centers with 4047
Series Cover Plates.
Pre-Cut Cover 31.5" (800mm) –
For mounting devices on 36"
(915mm) centers with 4047 Series
Cover Plates.
V4000C315/
G4000C315
* 4000C and 6000C are compatible with 4000B and 6000B Raceway.
** G6001DA Divider Clips are required to hold divider in place.
3
6000 Series Raceway Ordering Information
Catalog No./Item
V6006
G6006
Description/Specifications
Connection Cover
– Use where two
sections of 4000 or 6000 Series
Raceway Cover, not squarely cut,
come together.
Catalog No./Item
V6074
G6074
9 1/2"
(241mm)
Description/Specifications
Take-Off Connector (6000 to 6000)
–
For 90° tee connection at any
point along a run of 6000.
4 7/8"
(124mm)
3 9/16"
(90mm)
1 3/4"
(44mm)
1"
(25mm)
V6010B
G6010B
1 1/2"
(38mm)
Blank End Fitting
– For closing open
end of 6000 Series Raceway.
V6074A
G6074A
9 1/2"
(241mm)
Take-Off Connector (6000 to 4000)
–
For 90° tee connection at any point
along a run of 6000.
4 7/8"
(124mm)
V6011TX
G6011TX
4 3/4"
(121mm)
Combination Flat Elbow
– For
using as a flat elbow, tee, or cross,
(one 6001TX required for tee; two
for cross; not included).
3 9/16"
(90mm)
V6086
G6086
5 3/16"
(132mm)
1 3/4"
(45mm)
V6012TX
G6012TX
2 1/2"
(64mm)
4 1/4"
(108mm)
Internal or External 45° Elbow
–
For making internal or external 45°
turns in a run of 6000 Series Raceway.
Can also be assembled as an inverted
45° elbow.
Panel Connector
– For connecting
6000 with surface type panel boxes.
Accommodates maximum wire
capacity of 6000 system. Separate
C-flange fits around raceway,
covering uneven cuts to the box.
Cut 4 3/4" x 3 9/16" (121mm x 90mm)
hole in panel box.
V6007C-1
G6007C-1
2 1/2"
(64mm)
V6014A
G6014A
12"
(305mm)
Connector Fitting
– Has 1 1/4", 1 1/2"
and 2" (32mm, 38mm and 51mm) trade
size KOs in back and on each side.
Single-Gang Device Cover
–
For vertical mounting single-gang
devices on undivided raceway. Accepts
commercially available wall plate
(sold separately).
2 7/8"
(73mm)
1 7/8"
(48mm)
V6007C-2
G6007C-2
V6017TX
G6017TX
3 1/2"
(89mm)
Combination Internal/External 90°
Elbow
– For use as internal or external
elbow, straight-through fitting, tee, or
cross (one G6001TX required for tee or
straight through fitting; two for cross;
not included).
3 7/8"
(98mm)
2 7/8"
(73mm)
4 5/16"
(110mm)
Two-Gang Device Plate
–
For installing two-gang devices or two
vertically mounted single-gang devices
on undivided raceway. Accepts
commercially available wall plate
(sold separately).
V6046KD
G6046KD
2 3/8"
(60mm)
Circuit Breaker Housing
– KOs in
cover can be removed for installation
of three single-pole breakers. For use
with the following breakers rated
100A maximum.
MANUFACTURER
General Electric
Westinghouse
SERIES
THQC, THHQC
Quicklag, C, QCH
4 9/16"
(116mm)
* 4000C and 6000C are compatible with 4000B and 6000B Raceway.
†
G6001DA Divider Clips are required to hold divider in place.
4
4047 Series Cover Plates Ordering Information
Catalog No./Item
V4047AX
G4047AX
4 3/4"
(121mm)
m
m
Description/Specifications
Two-Gang Overlapping Cover
Single Round Opening
–
For straight blade and locking
single receptacles with face
diameters of 1.38" to 1.39"
(35mm to 36mm).
Catalog No./Item
V4047BT
G4047BT
4 3/4"
(121mm)
m
m
Description/Specifications
Two-Gang Overlapping Cover
Duplex & TracJack Mini Adapter
–
For 15A and 20A duplex
receptacles. Includes Mini adapter.
Accepts two Ortronics
®
TracJack
Communication Inserts.
5 1/8"
(130mm)
5 1/8"
(130mm)
m
m
V4047BX
G4047BX
4 3/4"
(121mm)
Two-Gang Overlapping Cover
Duplex Receptacle
–
For 15A and 20A duplex
receptacles. Accepts 106
Communications Duplex Frame.
V4047C-1
G4047C-1
4 3/4"
(121mm)
m
m
One-Gang Overlapping Device
Plate
– Use with commercially
available single-gang flush plate
(sold separately).
5 1/8"
(130mm)
5 1/8"
(130mm)
m
m
V4047BB
G4047BB
4 3/4"
(121mm)
Two-Gang Overlapping Cover
Two Duplex Receptacles
–
For 15A and 20A duplex
receptacles. Accepts 106
Communications Duplex Frame.
V4047C-2
G4047C-2
4 3/4"
(121mm)
m
m
Two-Gang Overlapping Device
Plate
– Use with commercially
available two-gang flush plate
(sold separately).
5 1/8"
(130mm)
5 1/8"
(130mm)
m
m
V4047BF
G4047BF
4 3/4"
(121mm)
Two-Gang Overlapping Cover
Duplex & Modular Furniture
–
For 15A and 20A duplex
receptacles. Includes combination
Modular Furniture and two
Keystone twistouts. Accepts
modular furniture adapter.
V4047JX
G4047JX
m
m
4 3/4"
(121mm)
Two-Gang Overlapping Cover
Single Round Opening
–
For straight blade and single
locking receptacles with face
diameters or 1.56" – 1.58"
(39mm – 40mm).
5 1/8"
(130mm)
5 1/8"
(130mm)
V4047BM
G4047BM
m
m
4 3/4"
(121mm)
5 1/8"
(130mm)
Two-Gang Overlapping Cover
Duplex & 2A Mini adapter
–
For 15A and 20A duplex
receptacles. Includes Mini adapter.
Accepts Pass & Seymour
®
Activate
inserts & Wiremold CM2 Series
Open System Communication
Modules.
V4047RX
G4047RX
m
m
4 3/4"
(121mm)
Two-Gang Overlapping Cover
Rectangle Opening
– For
rectangular GFCI, Surge and
decorator style devices. Does not
accept 5507 Series Faceplates.
5 1/8"
(130mm)
V4047BS
G4047BS
m
m
4 3/4"
(121mm)
Two-Gang Overlapping Cover
Duplex & Series II Mini Adapter
–
For 15A and 20A duplex
receptacles. Includes Mini adapter.
Accepts one Ortronics
®
Series II
Communication Insert.
V4047RF
G4047RF
m
m
4 3/4"
(121mm)
5 1/8"
(130mm)
5 1/8"
(130mm)
Two-Gang Overlapping Cover
Rectangle Opening & Modular
Furniture
– For rectangular GFCI,
Surge and decorator style devices.
Does not accept 5507 Series
Faceplates. Accepts modular
furniture adapter and keystone
RJ45 jacks.
NOTE: Faceplates can also be used with 6000 Series Raceway.
Add “C” prefix to denote Canadian version – UL Listed to U.S. and Canadian Safety Standards.
m
j
5
京公网安备 11010802033920号
EEWORLD
