Type MMP
Polyester Film Capacitors
Metallized Oval, Axial Leads
Low Profile Circuit Cards
Type MMP
axial-leaded, metallized polyester
capacitors are ideal when height is at a premium.
Non-inductive winding and self-healing capabilities
provide stability and long life.
Specifications
Voltage Range:
100 to 630 Vdc
Capacitance Range:
.01 to 10 µF
Capacitance Tolerance:
±10% (K) standard
±5% (J) optional
Operating Temperature Range:
–55 °C to 125 °C*
*Full-rated voltage at 85 °C–Derate linearly to 50%-rated voltage at 125 °C
RoHS Compliant
Dielectric Strength:
175% (1 minute)
Dissipation Factor:
1% Max. (25 °C, 1 kHz)
Insulation Resistance:
5,000 M
Ω
x µF
10,000 M
Ω
Min.
Life Test:
1,000 Hours at 85 °C at 125% Rated
Voltage
Cap.
(µF)
Ratings and Dimensions
Catalog
Number
Inches
T
(mm)
Inches
W
(mm)
Inches
L
(mm)
Inches
d
(mm)
dV/dt
V/μs
100 Vdc
0.15
0.22
0.33
0.47
0.68
1.00
1.50
2.20
3.30
4.70
6.80
10.00
MMP1P15K-F
MMP1P22K-F
MMP1P33K-F
MMP1P47K-F
MMP1P68K-F
MMP1W1K-F
MMP1W1P5K-F
MMP1W2P2K-F
MMP1W3P3K-F
MMP1W4P7K-F
MMP1W6P8K-F
MMP1W10K-F
0.197
0.236
0.236
0.236
0.256
0.276
0.276
0.354
0.433
0.354
0.512
0.630
(5.0)
(6.0)
(6.0)
(6.0)
(6.5)
(7.0)
(7.0)
(9.0)
(11.0)
(9.0)
(13.0)
(16.0)
0.354
0.394
0.433
0.394
0.433
0.492
0.492
0.630
0.729
0.729
0.906
1.044
(9.0)
(10.0)
(11.0)
(10.0)
(11.0)
(12.5)
(12.5)
(16.0)
(18.5)
(18.5)
(23.0)
(26.5)
0.670
0.670
0.670
0.906
0.906
0.906
1.063
1.063
1.063
1.378
1.378
1.378
(17.0)
(17.0)
(17.0)
(23.0)
(23.0)
(23.0)
(27.0)
(27.0)
(27.0)
(35.0)
(35.0)
(35.0)
0.024
0.024
0.024
0.024
0.024
0.032
0.032
0.032
0.032
0.032
0.032
0.032
(0.6)
(0.6)
(0.6)
(0.6)
(0.6)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
20
20
20
12
12
12
8
8
8
6
6
6
250 Vdc
0.10
0.15
0.22
0.33
0.47
MMP2P1K-F
MMP2P15K-F
MMP2P22K-F
MMP2P33K-F
MMP2P47K-F
0.217
0.217
0.197
0.217
0.276
(5.5)
(5.5)
(5.0)
(5.5)
(7.0)
0.335
0.374
0.354
0.414
0.433
(8.5)
(9.5)
(9.0)
(10.5)
(11.0)
0.670
0.670
0.906
0.906
0.985
(17.0)
(17.0)
(23.0)
(23.0)
(25.0)
0.024
0.024
0.024
0.024
0.032
(0.6)
(0.6)
(0.6)
(0.6)
(0.8)
28
28
17
17
12
CDE Cornell Dubilier
•
1605 E. Rodney French Blvd.
•
New Bedford, MA 02740
•
Phone: (508)996-8561
•
Fax: (508)996-3830 www.cde.com
Type MMP
Polyester Film Capacitors
Notice and Disclaimer:
All product drawings, descriptions, specifications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, confirming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specific customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.
CDE Cornell Dubilier
•
1605 E. Rodney French Blvd.
•
New Bedford, MA 02740
•
Phone: (508)996-8561
•
Fax: (508)996-3830 www.cde.com
京公网安备 11010802033920号
EEWORLD
