Hey guys, I have a problem with my DIY laser engraving machine. Where does the TTL on the laser driver board connect to the CNC shield V3 board? I tried connecting to D12 or SPN EN but there is no las...
After the RTT Studio project is successfully compiled and downloaded to the development board H750, you can also connect the serial port and open the debugging terminal, which is very convenient for m...
How to use the USB synchronous trigger signal to play the next picture in DLP6500 light crafter? You can use the following methods: 1. Use the trigger in signal as the trigger, and use the trigger in ...
[i=s]This post was last edited by dcexpert on 2021-6-10 22:16[/i]Translated from: https://www.zdnet.com/article/python-programming-why-it-hasnt-taken-off-in-the-browser-or-mobile-according-to-its-crea...
[i=s]This post was last edited by 1nnocent on 2021-3-26 18:57[/i]I wanted to try programming in C first, but after browsing the official website for a long time, I didn't get much.
I happened to find ...