Pressure Connections and Recommended Installation Torque
Dimensions in mm [Inch]
Name
Thread
Torque
1/4 - 18 NPT
External
25 Nm
1/8 - 27 NPT
External
20 Nm
Stud End
DIN 3852-B-G1/4
External
20 Nm
Name
Thread
Torque
Tapped Hole
DIN 3852-Y-G1/4
Internal
15 Nm
3/8-24 UNF-2A PER
SAE J 1926/2
External
22 Nm
3/8-24 UNF-2B PER
SAE J 1926/1
Internal
22 Nm
Note: Recommended torque may varify according to material and specific application.
www.kavlico.com
P500 Data Sheet
4
How to Order
Pressure Connection (port)
Seal Material
D
Fluorocarbon / Viton (-25° to
+125°C)
E
Fluorosilicone (-40° to 125°C)
F
Ethylene Propylene (-30° to 120°C)
1
1/4 - 18 NPT (External Threads)
4
1/8 - 27 NPT (External Threads)
5
Stud End DIN 3852-B-G 1/4 (External Threads)
6
Tapped Hole DIN 3852-Y-G 1/4 (Internal Threads)
9
3/8 - 24 UNF-2A Per SAE J1926/2 (External Threads)
10
3/8 - 24 UNF-2B Per SAE J1926/1 (Internal Threads)
P500
Pressure Ranges
1B
0 – 1 Bar
15
20
30
50
75
16B
A
Reference
E
1
A
Built-in Electrical Connection
A
With Mating Connector, w/12”, 18 AWG
Leads
C
Without Mating Connector
0 – 15 PSI
0 – 20 PSI
0 – 30 PSI
0 – 50 PSI
0 – 75 PSI
A
Absolute
G
Gage
S
Sealed Gage (Referenced to 14.7
PSIA)
1.6B
0 – 1.6 Bar
2.5B
0 – 2.5 Bar
4B
0 – 4 Bar
6B
0 – 6 Bar
10B
0 – 10 Bar
16B
0 – 16 Bar
25B
0 – 25 Bar
40B
0 – 40 Bar
50B
0 – 50 Bar
70B
0 – 70 Bar
100
0 – 100 PSI
150
0 – 150 PSI
200
0 – 200 PSI
300
0 – 300 PSI
500
0 – 500 PSI
750
0 – 750 PSI
1000
0 – 1000PSI
Example:
P500 -16B - A - E1A
Description:
P500 Sensor, 0 - 16 Bar Absolute, Fluorosilicone Seal Material, 1/4 - 18 NPT Pressure Connection,
with Mating Connector
Before installation and operation, ensure that the appropriate pressure sensor has been selected in terms of pressure range, design and specific measuring
conditions. Non-compliance can result in serious injury and/or damage to the equipment.
Warning:
The product information contained in this catalogue is given purely as information and does not constitute a representation, warranty or any form of
contractual commitment. Kavlico reserve the right to modify their products without notice. It is imperative that we should be consulted over any particular use
or application of our products and it is the responsibility of the buyer to establish, particularly through all the appropriate tests, that the product is suitable for
the use or application. Under no circumstances will our warranty apply, nor shall we be held responsible for any application (such as any modification, addition,
deletion, use in conjunction with other electrical or electronic components, circuits or assemblies, or any other unsuitable material or substance) which has not
been expressly agreed by us prior to the sale of our products.
A8 core board, kernel version 4.1.18, the initial serial port devices only have ttyO0-ttyO2, now we need to use ttyO5 serial port, and add uart3, uart4, uart5 in the kernel
The device tree is modified...
unix/mpthreadport: Ensure enough thread stack to detect overflow.
unix/mpthreadport: Ensure enough thread stack to detect overflow.
tests/float: Add new lexer test to test parsing of float without pre...
[i=s]This post was last edited by AE007 on 2021-12-13 02:42[/i]In actual projects, we need to display the value of the sensor or ADC in the form of a waveform. The usual solution is to use the USB int...
This content is originally created by EEWORLD forum user kim.tian. If you want to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source...
This chip is mainly used in transmitters. After consulting the data sheet, I found that its input and output should be consistent. In fact, after building a circuit test, I found that no matter how mu...
At present, there are three main automation solutions for ports: Automated Guided Vehicles (AGVs), Unmanned Straddle Carriers (ASCs), and container trucks. Among them, AGVs are the earliest...[Details]
This paper proposes a data packaging method so that the same amount of data occupies less storage space and improves transmission efficiency.
introduction
In the detection system composed...[Details]
What is multi-channel MPPT? Why does a string inverter have several MPPTs? What is the MPPT algorithm? Let's explain what MPPT is.
Maximum Power Point Tracking (MPPT) is a core technology in p...[Details]
TPMS (tire pressure monitoring system), airbags, and ABS (anti-lock braking system) are the three major safety systems of a car. When it comes to tire pressure, the industry often says that "the en...[Details]
When it comes to domestic high-end flagship phones, many people will immediately think of Huawei's P series and Mate series. Although many people are questioning the high prices of Huawei's flagship ...[Details]
The io registers of stm8s include DDR, IDR, ODR, CR1, and CR2. As for the configuration of io, you can understand it by reading the table below. The commonly used ones are push-pull output, floating ...[Details]
The development of the Internet from PC Internet to mobile Internet and then to the Internet of Things is an evolutionary process. Whether it is traditional IT communication manufacturers Huawei an...[Details]
Garbage classification has been implemented for a week. Are the people of Shanghai doing well? I heard that many people have given up the habit of eating takeout, because throwing away the garb...[Details]
At 5:10 am on September 23, 2019, my country successfully launched the 47th and 48th BeiDou navigation satellites in a "two-satellite-in-one-launch" manner at the Xichang Satellite Launch Center. The...[Details]
background Metamaterials, also known as super-intelligent materials, usually refer to composite materials that are artificially designed and have extraordinary physical properties that natural mater...[Details]
This morning, the 2021 OPPO Developer Conference (ODC21) officially opened. With the theme of "Openness, Integration, Good Innovation", the conference proposed new thinking on the future ecology. "...[Details]
In industrial control, it is often necessary to transmit the data collected by the microcontroller to the PC for processing and display, and send control commands to the microcontroller based on the ...[Details]
1. What is source-sink type? What is a pull-up resistor? Pull-down resistor? What is line drive output open collector output, push-pull output? Let’s first talk about the structure of open collector ...[Details]
Usually, the 31/2-digit and 41/2-digit digital ranges are designed based on the principle of measuring capacitance using the capacitive reactance method. Experiments show that when the measured induc...[Details]
At 6:10 a.m. on October 28, the Alxa Power Supply Company of the Inner Mongolia Electric Power Group organized the planned grid connection and off-grid maintenance of the Ejina "source-grid-load-st...[Details]
Linux and Android
京公网安备 11010802033920号
EEWORLD
