16.8 ~ 30W Power Adaptor with Charging Function
GC30E
series
■
Features :
Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion
batteries (lithium iron and lithium manganese) (Note.1)
•
Universal AC input / Full range
•
With EURO type 6 FT power cord(2pin)
•
Class II power (without earth pin)
•
No load power consumption <1.0W
Constant current and voltage(CC,CV mode)
•
Suitable for continue load
•
For high surge current equipment
•
Protections: Short circuit / Overload / Over voltage / Over temp.
•
2 colors LED indicate for loading status
•
Fully enclosed plastic case
High reliability
•
Approvals: TUV / CB / FCC / CE
SPECIFICATION
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE SET AT
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
GC30E-0P1J
GC30E-0
Note.3
4.2V
•
2 years warranty
GC30E-1P1J
GC30E-1
5.6V
3.99A
0 ~ 3.99A
22.38W
50mVp-p
5 ~ 5.8V
±0.5%
GC30E-11P1J
GC30E-11
7.2V
3A
0 ~ 3A
21.6W
80mVp-p
6.5 ~ 7.5V
±0.5%
TUV
Rheinland
Product Safety
:
geprUfre
Sicherheit
GC30E-2P1J
GC30E-2
8.4V
3A
0 ~3A
25.2W
80mVp-p
7.7 ~ 8.6V
±0.5%
GC30E-4P1J
GC30E-4
14.3V
2.09A
0 ~ 2.09A
30W
100mVp-p
13.5 ~ 14.5V
±0.5%
GC30E-5P1J
GC30E-5
16.8V
1.6A
0 ~ 1.6A
27W
100mVp-p
16 ~ 17V
±0.5%
GC30E-6P1J
GC30E-6
28.6V
1.04A
0 ~ 1.04A
30W
150mVp-p
27.1 ~ 28.8V
±0.5%
4A
0 ~ 4A
16.8W
RIPPLE & NOISE (max.)
Note.4
50mVp-p
CHARGING VOLTAGE RANGE
Note.5
3.6 ~ 4.4V
LINE REGULATION
LED INDICATOR
Note.6
±1.0%
Green LED ON <150 ~ 200mA < Red LED ON
SETUP, RISE, HOLD UP TIME
200ms, 50ms, 16ms at full load
VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT
INRUSH CURRENT (max.)
LEAKAGE CURRENT(max.)
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
47 ~ 63Hz
55%
1A / 100VAC
40A / 230VAC
0.25mA / 240VAC
90 ~ 110% Constant current mode and over 300% pulsing mode
Protection type : Constant current limiting, recovers automatically after fault condition is removed
110 ~ 135% rated output voltage
Protection type : Clamp by zener diode
IC1Tj130℃
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
0 ~ +50
℃
(Refer to output load derating curve)
20% ~ 90% RH non-condensing
-20 ~ +85
℃
, 10 ~ 95% RH
±
0.03% /
℃
(0 ~ 50
℃
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-O/P:100M Ohms / 500VDC / 25
℃
/ 70% RH
70%
74%
76%
78%
78%
80%
SAFETY & ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
Compliance to EN55014-1 class B, FCC part 15 Class B
EMC
HARMONIC CURRENT
Compliance to EN61000-3-2,3
EMS IMMUNITY
OTHERS
CONNECTOR
NOTE
DIMENSION
PACKING
PLUG
CABLE
Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A
108*67*36mm (L*W*H)
405g; 36pcs / 16.5kg / CARTON
Standard type P1J: 2.1
ψ
* 5.5
ψ
* 11mm, tuning fork type center positive for stock ; Other type available by customer requested
Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only for stock ; Other type available by customer requested
1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
2.All parameters are specified at 230VAC input, rated load, 25
℃
70% RH ambient.
3.DC voltage: The output voltage set at point measure by plug terminal & 0% load.
4.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
5.Output charging voltage range is measured from 0% to 100% rated load.
6.Line regulation is measured from low line to high line at rated load.
File Name:GC30E-SPEC 2016-01-07
京公网安备 11010802033920号
EEWORLD
