Catalog 1308242
Issued 3-03 (PDF Revised 4-07)
P&B
600
series
15 Amp Sensitive
PC Board Relay
File E38802
File LR48569
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Features
• Low power sensitive coil.
• 1 Form A, 1 Form B and 1 Form C contact arrangements.
• Various contact materials and types for ratings to 15 amps.
• Coil assembly rated 130°C, 94V-O.
• Applications include sensor and timer controls, emergency lighting, instr-
mentation, alarm systems, smoke and fire detectors, business equipment
and vending machines.
Initial Dielectric Strength
Between Open Contacts:
500VAC, 60 Hz., 2 seconds.
Between Coil and Contacts:
1,000VAC, 60 Hz., 2 seconds.
Coil Data @ 25°C
Contact Data
Arrangements:
1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form C
(SPDT).
Material and Type:
Gold-silver crossbar, silver-cadmium crossbar, palladi-
um crossbar, gold-flashed silver cadmium, silver sadmium oxide, find silver,
gold-flashed coin silver.
Expected Mechanical Life:
10 million operations, minimum.
Expected Electrical Life:
100,000 operations, minimum, at rated load.
UL/CSA Ratings @ 25°C
Code Contact Material
B
Au Flashed AgCd
Rated Voltage:
3 to 48VDC.
Maximum Voltage @ 85°C:
120% of Rated Voltage.
Nominal Power @ 25°C:
110mW for 3A and 5A rated models;
240mW for 15A rated models.
Maximum Power @ 25°C:
1W.
Duty Cycle:
Continuous.
Initial Insulation Resistance:
10,000 megohms, min., at 25°C, 500VDC
and 50% rel. humidity.
Coil Data @ 25°C
Rating
75VA@24VAC Pilot Duty§
1A@120VAC General Purpose
1.5A@50VDC Resistive
600W@277VAC Gen’l. Purpose SPST-NO Only
240W@277VAC Gen’l. Purpose SPST-NC Only
480VA@277VAC Pilot Duty SPDT Only
480VA@Ballast SPDT Only
1/10 HP@120VAC
3A@28VDC Resistive
125VA@120VAC Pilot Duty§
1/8 HP@120/240 VAC
15A@150VAC Inductive 0.4 PF NO Only
10A@277VAC Resistive
15A@28VDC Resistive
TV5@NO Contacts
TV2@NC Contacts
600W@277VAC Tungsten SPDT-NO Only
240W@277VAC Tungsten SPDT-NC Only
480VA@277VAC Pilot Duty SPDT Only §
480VA@277VAC Ballast SPDT Only
1/3 HP@120/240VAC NO
1/6 HP@120/240VAC NC
5A@240VAC Resistive
5A@28VDC
125VA@240VAC Pilot Duty §
125VA@125VAC Pilot Duty §
15A@150VAC Resistive
15A@28VDC Resistive
10A@277VAC Resistive
480VA@240VAC Pilot Duty
TV2@NC Contacts
TV4@NO Contacts
480W@120VAC Tungsten NO
240W@120VAC Tungsten NC
3A@240VAC Resistive
3A@28VDC Resistive
2A@28VDC Resistive
Nominal
Voltage
VDC
3
6
9
12
18
24
28
48
DC Resistance in Ohms
±10%
3 A & 5A Types
82
327
736
1,309
2,945
5,236
7
,127
20,945
15A Types
38
150
338
600
1,350
2,400
3,267
9,600
Must
Operate
Voltage
VDC
2.25
4.5
6.75
9.0
13.5
18.0
21.0
36.0
Must
Release
Voltage
VDC
0.3
0.6
0.9
1.2
1.8
2.4
2.8
4.8
G
Au Ag
H
AgCdO
Operate Data @ 25°C
Must Operate Voltage:
75% of nominal.
Must Release Voltage:
10% of nominal.
Operate Time:
10 ms, typ.
Release Time:
10 ms, typ.
K
Au Flashed Coin Ag
Environmental Data
Temperature Range:
Storage:
-55°C to +85°C.
Operating:
-55°C to +85°C.
R
Fine Ag
S
V
Ag Cd
Palladium
Mechanical Data
Termination:
Printed circuit terminals.
Enclosures:
Unsealed dust cover or sealed plastic case.
Weight:
1.6 oz. (45g) approximately.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
497
Refer to inside back cover.
§ Only when Code Y Electrical Spacing is specified.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Catalog 1308242
Issued 3-03 (PDF Revised 4-07)
P&B
3
– 24
V
Y
Q
Ordering Information
Typical Part Number
B
60
1. Basic Series Type:
60 = Miniature, PC board relay rated 3A or 5A (Contact Material Code G, S, V or B only)
61 = Miniature, PC board relay rated 15A (Contact Material Code H or R only)
65 = Miniature, PC board relay rated 5A (Contact Material Code K only)
2. Contact Arrangement:
1 = 1 Form A (SPST-NO)
3. Coil Voltage:
3 = 3VDC
6 = 6VDC
9 = 9VDC
12 = 12VDC
2 = 1 Form B (SPST-NC)
18 = 18VDC
24 = 24VDC
3 = 1 Form C (SPDT)
28 = 28VDC
48 = 48VDC
4. Contact Material:
G = Au Ag crossbar, rated 3A (Only available with Basic Series Type 60).
S = Au Cd crossbar, rated 3A (Only available with Basic Series Type 60).
V = Pd crossbar, rated 3A (Only available with Basic Series Type 60).
B = Au-flashed AgCd crossbar, rated 5A (Only available with Basic Series Type 60).
H = AgCdO, rated 15A (Only available with Basic Series Type 61).
R = Fine Ag, rated 15A (Only available with Basic Series Type 61).
K = Au-flashed coin Ag, rated 5A (Only available with Basic Series Type 65).
5. Electrical Spacing:
Leave Blank = 0.125 in (3.175 mm) Clearance and 0.125 in (3.175 mm) Creepage
Y = 0.125 in (3.175 mm) Clearance and 0.250 in (6.35 mm) Creepage
6. Enclosure Type
Leave Blank = Unsealed dust cover
Q = Sealed cover
Our authorized distributors are more likely to stock the following items for immediate delivery.
None at present.
Outline Dimensions
1.250 MAX.
(31.75)
.775 MAX.
(19.69)
1.200 MAX.
(30.48)
.240
(6.1)
PC Board Layout (Bottom View)
.273
(6.93)
.313
(7.95)
.546
(13.9)
Wiring Diagrams (Bottom Views)
1 Form A
(SPST-NO)
1 Form B
(SPST-NC)
1 Form C
(SPDT)
.067 DIA. TYP.
(1.70)
.843
(21.4)
.297
(7.54)
.594
(15.1)
Note:
On single throw models, only necessary terminals are present.
Note:
On single throw models, only necessary terminals are present.
Dimensions are shown for
498
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Power technology
京公网安备 11010802033920号
EEWORLD
