New Product
Push-In Plus Terminal Block Sockets
PYF-@@-PU/P2RF-@@-PU
Sockets with Push-In Plus Terminal Blocks
Reduce Wiring Time for Relays and Timers
• Wiring time is reduced by 60%* in comparison with traditional
screw terminals.
• No screw loosening means maintenance-free application.
• Light insertion force and strong pull-out strength to achieve both
less wiring work and high reliability.
• ‘Hand-free’ structure that holds an inserted screwdriver to
achieve easier wiring work for stranded wires.
• Two wires can be independently inserted into each terminal hole.
• DIN Track mounting or screw mounting.
•
Use with MY and G2R-S relays; H3RN-B, H3Y-B, H3YN-B
timers; and K7L-_B liquid leak detector
*
According to OMRON actual measurement data from November 2015.
Refer to
Safety Precautions
on page 6.
For the most recent information on models that have been
certified for safety standards, refer to your OMRON website.
Features
•
•
•
•
•
•
•
Coil terminals and contact terminals are completely separated in an organized wiring layout.
A Release Lever is provided as a standard feature.
DIN terminal numbers are indicated.
The double fixture rail with DIN hook tabs attached to the top and bottom lets you mount the Socket from either the top or bottom.
Front-in short bar enables easy installation without interference in duct when wiring.
Please refer short bar correspondence table in page 5 for further information of short bar.
There are screw mounting holes in the DIN hooks on the PYF-@@-PU and P2RF-@@-PU. Pull out the DIN hook tabs to mount the Sockets with
screws.
DIN hook tab (the fixture rail)
Contact terminals (commons)
Contact short bar insertion holes
NO contact terminals
NC contact terminals
Release lever
(standard feature)
Coil short bar insertion holes
Coil terminals
Back of Push-In Plus
Terminal Block Socket
The fixture rails can be
pulled out to mount the
Relays with screws.
Double
fixture
rails
1
PYF-@@-PU/P2RF-@@-PU
Ordering Information
Sockets
Applicable model (typical example)
MY2
MY4
H3Y(N)-2-B
H3Y(N)-4-B
G2R-1-S (S)
H3RN-1-B
G2R-2-S (S)
H3RN-2-B
K7L-@B
2
P2RF-08-PU
Socket
No. of poles
2
4
2
4
1
Model
*
PYF-08-PU
PYF-14-PU
PYF-08-PU-L
PYF-14-PU-L
P2RF-05-PU
General Purpose Relays
MY Series
H3Y Series
H3YN Series
G2R-@-S (S) Series
H3RN Series
G2R-@-S (S) Series
H3RN Series
K7L Series
Timers
General Purpose Relays
Timers
General Purpose Relays
Timers
Liquid Leakage Sensors
Note:
*
The PYF-@@-PU-L Sockets do not have release levers.
Accessories (Order Separately)
Short Bars
Pitch
Applicable models
No. of poles
2
7.75 mm
PYF-@@-PU and
P2RF-@@-PU
3
4
20
31.0 mm
15.5 mm
PYF-@@-PU
P2RF-@@-PU
8
8
Red (R)
Blue (S)
Yellow (Y)
Colors
Model
*
PYDN-7.75-020@
PYDN-7.75-030@
PYDN-7.75-040@
PYDN-7.75-200@
PYDN-31.0-080@
PYDN-15.5-080@
10
Minimum order (quantity)
Note:
Use the Short Bars for crossover wiring within one Socket or between Sockets.
*
Replace the box (@) in the model number with the code for the covering color.
Labels
Applicable models
PYF-@@-PU and
P2RF-@@-PU
Model
XW5Z-P4.0LB1
Minimum order
(sheet)
(quantity per sheet)
5
(1 sheet/60 pieces)
Parts for DIN Track Mounting
Type
DIN Tracks
End Plate
*
Spacer
1m
0.5 m
Model
PFP-100N
PFP-50N
PFP-M
PFP-S
Minimum order (quantity)
---
10
Refer to your OMRON website for details on the PFP-@.
*
When mounting DIN rail, please use End Plate (Model PFP-M).
Ratings/Characteristics
Characteristics
PYF-@@-PU(-L)
Item
Ambient operating humidity
Continuous carry current
*
Between contact terminals
of same polarity
Dielectric Between contact terminals
strength of different polarity
Between coil and
contact terminals
Insulation resistance
Weight (approx.)
Model
Ambient operating temperature
P2RF-@@-PU
−
40 to 70°C
5 to 85%
10 A
6A
2,000 VAC, 1 min 2,000 VAC, 1 min
2,000 VAC, 1 min 2,000 VAC, 1 min
2,000 VAC, 1 min 2,000 VAC, 1 min
1,000 MΩ min. (at 500 VDC)
80 g
87 g
PYF-08-PU (-L)
PYF-14-PU (-L)
Item
Ambient operating humidity
Continuous carry current
*
Between contact terminals
of same polarity
Dielectric Between contact terminals
strength of different polarity
Between coil and
contact terminals
Insulation resistance
Weight (approx.)
Model
Ambient operating temperature
−
40 to 70°C
5 to 85%
10 A
P2RF-05-PU
P2RF-08-PU
6A
1,000 VAC, 1 min 1,000 VAC, 1 min
---
3,000 VAC, 1 min
4,000 VAC, 1 min 4,000 VAC, 1 min
1,000 MΩ min. (at 500 VDC)
40 g
45 g
*
The continuous carry current of 10 A for PYF-08-PU(-L) is for an
ambient temperature of 55°C. At an ambient temperature of 70°C,
the value is 7 A.
Applicable Standards
*
The continuous carry current of 10 A for P2RF-05-PU is for an
ambient temperature of 55°C. At an ambient temperature of 70°C,
the value is 7 A. The continuous carry current of 6 A for P2RF-08-
PU is for an ambient temperature of 55°C. At an ambient
temperature of 70°C, the value is 5 A.
• UL 508, CSA C22.2 No.14, TÜV (EN 61984)
Note:
The continuous carry current of the PYF-08-PU and P2RF-05-PU for TÜV certification is 10 A at an ambient temperature of 55°C and 7 A
at an ambient temperature of 70°C.
The continuous carry current of the P2RF-08-PU for TÜV certification is 6 A at an ambient temperature of 55°C and 5 A at an ambient
temperature of 70°C.
2
PYF-@@-PU/P2RF-@@-PU
Dimensions
Sockets
PYF-08-PU(-L)
71.5 max.
(Unit: mm)
52.1
Terminal Arrangement/
Internal Connection Diagram
(TOP VIEW)
A1
A2
67.5
30.8
28.1
27.6
(4.2)
(13)
(14)
Mounting Hole
Dimensions
Two M4 screw
holes or
two 4-dia. holes
108
35.5
Release lever
*
90 max.
12
14
(1)
(5)
(9)
42
44
41
(4)
(8)
27.25
11
27.6
(12)
3.9
36.3
45
31 max.
(4.2)
*
The PYF-08-PU-L Sockets do not have release levers.
Note:
The numbers in
Note:
Pull out the hooks to mount the
parentheses are
Relay with screws.
traditionally used
terminal numbers.
PYF-14-PU
71.5 max.
Terminal Arrangement/
Internal Connection Diagram
(TOP VIEW)
52.1
A1
(13)
67.5
A2
(14)
30.8
28.1
27.6
Mounting Hole
Dimensions
(4.2)
Two M4 screw
holes or
two 4-dia. holes
108
(1) (2) (3) (4)
35.5
Release lever
*
90 max.
12 22 32 42
14 24 34 44
11 21 31 41
(5) (6) (7) (8)
(9) (10) (11) (12)
27.25
27.6
3.9
36.3
45
31 max.
(4.2)
Note:
The numbers in
parentheses are
Note:
Pull out the hooks to mount
traditionally used
the Relay with screws.
terminal numbers.
*
The PYF-14-PU-L Sockets do not have release levers.
Mounting Heights
PYF-08-PU
MY
PYF-14-PU
MY
67.5
28.1
64.1
67.5
28.1
64.1
(3.9)
(3.9)
3
PYF-@@-PU/P2RF-@@-PU
P2RF-05-PU
56.5 max.
Terminal Arrangement/
Internal Connection Diagram
(TOP VIEW)
52.4
28.1
27.6
(3)
(1)
A2
A1
(5)
Mounting Hole
Dimensions
Two M4 screw
holes or
two 4-dia. holes
108
35.5
Release lever
90 max.
12
(2)
14
27.25
11
(3)
(4)
27.6
3.9
36.3
45
52.1
15.5 max.
(3)
Note:
The numbers in
parentheses are
traditionally used
terminal numbers.
Note:
Pull out the hooks to mount the
Relay with screws.
P2RF-08-PU
56.5 max.
Terminal Arrangement/
Internal Connection Diagram
(TOP VIEW)
(1)
A2
A1
52.4
28.1
27.6
(3)
(8)
Mounting Hole
Dimensions
Two M4 screw
holes or
two 4-dia. holes
108
35.5
Release lever
90 max.
12
14
(2)
(4)
(3)
22
24
21
(7)
(5)
(6)
27.25
11
27.6
(3)
15.5 max.
3.9
36.3
45
52.1
Note:
The numbers in
parentheses are
traditionally used
terminal numbers.
Note:
Pull out the hooks to mount the
Relay with screws.
Mounting Heights
P2RF-05-PU
G2R-@-S (S)
P2RF-08-PU
G2R-@-S (S)
63.6
28.1
28.1
63.6
(3.9)
(3.9)
4
PYF-@@-PU/P2RF-@@-PU
Accessories (Order Separately)
Short Bars
PYDN-7.75-@@ (7.75 mm)
L
3.90
Application
Pitch
Applicable
models
No. of
poles
2
L
(Length)
15.1
22.85
30.6
154.6
224.35
115.85
Colors
Model
*
PYDN-7.75-020@
PYDN-7.75-030@
Maximum
carry
current
12
18.5
2.25
1.57
For Contact
terminals
(common)
For Coil
terminals
7.75 mm
PYF-@@-PU and
P2RF-@@-PU
3
4
20
8
8
Red (R)
Blue (S)
Yellow (Y)
PYDN-7.75-040@
PYDN-7.75-200@
PYDN-31.0-080@
PYDN-15.5-080@
20 A
PYDN-31.0-080@ (31mm)
3.90
31 mm
15.5 mm
PYF-@@-PU
P2RF-@@-PU
12
2.25
224.35
18.5
1.57
*
Replace the box (@) in the model number with the code for the covering color.
Note: 1.
Use the Short Bars for crossover wiring within one Socket or between Sockets.
2.
When using short bar to coil terminals of PYF-@@-PU, make sure to use PYFDN-31.0-080@
(31mm).
When using short bar to coil terminals of P2RF-@@-PU, A1 terminal cannot be used.
In case crossover wiring of A1 terminal side is needed, crossover wiring using A1 terminals by
wire is possible.
Short bar correspondence table
Contact terminal
(Common)
PYF-@@-PU
P2RF-@@-PU
Available
Available
Coil terminal
A1
❍
---
A2
❍
❍
PYDN-15.5-080@ (15.5mm)
115.85
3.90
12
18.5
2.25
1.57
Parts for DIN Track Mounting
Refer to your OMRON website for details on the PFP-@.
Appearance
Type
1m
DIN Tracks
0.5 m
End Plate
*
Spacer
PFP-50N
PFP-M
PFP-S
10
Model
PFP-100N
–
Minimum order
(Quantity)
*Use End Plates (PFP-M) to prevent components from sliding out of position in shipping and applications with vibration.
5
京公网安备 11010802033920号
EEWORLD
