Technical Data
September 2012
3M
™
Bumpon
™
Protective Products
Resilient Rollstock
SJ5200
•
SJ5800
•
SJ5900
•
SJ6000
•
SJ6200 Series
Product Description
3M™ Bumpon™ Resilient Rollstock Products are opaque, colored polyurethane materials produced with aggressive
pressure-sensitive adhesives.
3M™ Bumpon™ Resilient
Rollstock Product
SJ5216
SJ5208
SJ5832
SJ5816
SJ5808
SJ5916
SJ5908
SJ5904
SJ6032
SJ6016
SJ6008
SJ6232
SJ6216
SJ6208
Thickness
Inches
mm
1/16
1/8
1/32
1/16
1/8
1/16
1/8
1/4
1/32
1/16
1/8
1/32
1/16
1/8
1.6
3.2
0.8
1.6
3.2
1.6
3.2
6.4
0.8
1.6
3.2
0.8
1.6
3.2
Polyurethane
Hardness, Shore M
36 (soft foam)
29 (soft foam)
72
72
72
40 (medium foam)
36 (medium foam)
36 (medium foam)
72
72
72
72
72
72
Polyurethane
Surface Finish
matte
matte
Adhesive Type
R-25
(synthetic rubber)
R-30
(natural rubber)
A-20
(acrylic)
A-20
(acrylic)
R-25
(synthetic rubber)
matte
matte
matte
Polyurethane
Pressure Sensitive Adhesive
Polyester Release Liner
3
3M
™
Bumpon
™
Protective Products
Resilient Rollstock
SJ5200
•
SJ5800
•
SJ5900
•
SJ6000
•
SJ6200 Series
Features
• Can be die cut to a variety of shapes and sizes.
• Excellent skid-resistance, high coefficient of friction.
• Excellent resistance to marring or staining.*
• Long aging resiliency – will not crack or harden.*
• Excellent cushioning properties.
• Excellent abrasion resistance.
• Vibration and shock dampening.
• Easy application – pressure-sensitive backing.
*Resulting
from a urethane composition which contains no plasticizers.
Application Ideas
• Die cut into circles or squares for use as skid-resistant feet on hand held or desktop computers, calculators, electric
housewares, electronic equipment, desk top items and medical devices.
• Die cut for gasket application.
• Skid-resistant surface on floor.
• Cushions or spacers within electronic devices.
• Selective masking for sandblast operation.
• Spacer or stop to prevent surface damage.
• Anti-rattle spacer to fill gaps, dampen noise and reduce vibration.
• Door kick pads.
• Corner protection strips.
• Roll covering for textile industry and other web feed machinery.
• Die cut cushioning stop for cabinetry (3M™ Bumpon™ Resilient Rollstock SJ5200 and SJ5900 Foam).
(2)
3M
™
Bumpon
™
Protective Products
Resilient Rollstock
SJ5200
•
SJ5800
•
SJ5900
•
SJ6000
•
SJ6200 Series
Product Construction
SJ5200
Elastomer
Elastomer Finish
Release Liner
Polyurethane (foam)
matte
4 mil, silicone coated,
translucent polyester (PET),
with printed 3M logo
R-25 (synthetic rubber)
3M™ Bumpon™ Resilient Rollstock Series
SJ5800
SJ5900
SJ6000
Polyurethane (solid)
matte
4 mil, silicone coated,
translucent polyester (PET),
with printed 3M logo
R-30 (natural rubber)
Polyurethane (foam)
matte
4 mil, silicone coated,
translucent polyester (PET),
with printed 3M logo
A-20 (acrylic)
Polyurethane (solid)
matte
4 mil, silicone coated,
translucent polyester (PET),
with printed 3M logo
A-20 (acrylic)
SJ6200
Polyurethane (solid)
matte
4 mil, silicone coated,
translucent polyester (PET),
with printed 3M logo
R-25 (synthetic rubber)
Adhesive
3M™ Bumpon™ Resilient Rollstock Product
SJ5216
Color
Thickness* in.
in.
(mm)
Thickness ± in.
Tolerance ± (mm)
Roll Length yd.
Roll Width**
Standard in.
(mm)
Minimum in.
(mm)
Maximum in.
(mm)
Slitting
Tolerance
± in.
± in.
± (mm)
Light
Brown
1/16
0.062
(1.6)
0.010
(0.25)
36
SJ5208
Light
Brown
1/8
0.125
(3.2)
0.015
(0.38)
36
SJ5832
Black
Brown
1/32
0.031
(0.8)
0.005
(0.13)
72
SJ5816
Black
Brown
1/16
0.062
(1.6)
0.007
(0.18)
36
SJ5808
Black
Brown
1/8
0.125
(3.2)
0.010
(0.25)
36
SJ5916
Black
1/16
0.062
(1.6)
0.010
(0.25)
36
SJ5908
Black
1/8
0.125
(3.2)
0.015
(0.38)
36
SJ5904
Black
1/4
0.250
(6.4)
0.020
(0.50)
18
SJ6032
Black
Brown
1/32
0.031
(0.8)
0.005
(0.13)
72
SJ6016
Black
Brown
1/16
0.062
(1.6)
0.007
(0.18)
36
SJ6008
Black
Brown
1/8
0.125
(3.2)
0.010
(0.25)
36
SJ6232
Black
1/32
0.031
(0.8)
0.005
(0.13)
72
SJ6216
Black
1/16
0.062
(1.6)
0.007
(0.18)
36
SJ6208
Black
1/8
0.125
(3.2)
0.010
(0.25)
36
4.5
(114.3)
0.5
(12.7)
9
(228.6)
1/32
0.031
(0.8)
4.5
(114.3)
0.5
(12.7)
9
(228.6)
4.5
(114.3)
0.5
(12.7)
9
(228.6)
4.5
(114.3)
0.5
(12.7)
9
(228.6)
1/32
0.031
(0.8)
4.5
(114.3)
1
(25.4)
9
(228.6)
4.5
(114.3)
0.5
(12.7)
9
(228.6)
4.5
(114.3)
0.5
(12.7)
9
(228.6)
1/32
0.031
(0.8)
4.5
(114.3)
1
(25.4)
9
(228.6)
4.5
(114.3)
0.5
(12.7)
9
(228.6)
4.5
(114.3)
0.5
(12.7)
9
(228.6)
1/32
0.031
(0.8)
4.5
(114.3)
1
(25.4)
9
(228.6)
4.5
(114.3)
0.5
(12.7)
9
(228.6)
4.5
(114.3)
0.5
(12.7)
9
(228.6)
1/32
0.031
(0.8)
4.5
(114.3)
1
(25.4)
9
(228.6)
*ASTM
D-3767 procedure A (3.2 psi) measured without liner. **Non-standard sizes may be subject to minimum order requirements.
Custom Rollstock Products
Custom Thickness:
3M can customize thickness to your specifications.
Note:
The capability range for 3M™ Bumpon™ Resilient Rollstock Series SJ5800, SJ6000, and SJ6200 is 1/32 in. (0.031)
minimum and 1/4 in. (0.250) maximum.
The capability range for 3M™ Bumpon™ Resilient Rollstock Series SJ5900 is 1/16 in. (0.062) minimum and 5/16 in. (0.312)
maximum.
Custom Color:
3M can match most colors to your specifications.
Note:
Special products require a qualifying minimum order quantity, and one-time color matching charge. For more information please contact your local 3M
sales rep or distributor.
(3)
3M
™
Bumpon
™
Protective Products
Resilient Rollstock
SJ5200
•
SJ5800
•
SJ5900
•
SJ6000
•
SJ6200 Series
Typical Physical Properties and Performance Characteristics
Note:
The following technical information and data should be considered representative or typical only and should not be
used for specification purposes.
Property
Hardness, Shore M
Test Method
ASTM-D-2240
SJ5200
36 (SJ5216)
29 (SJ5208)
4.0
(0.64)
ASTM-D-1894
Stainless Steel
Glass
Formica
®
laminate
Wood
*
*
*
*
3M™ Bumpon™ Resilient Rollstock Series
SJ5800
SJ5900
SJ6000
72
40 (SJ5916)
36 (SJ5908,
SJ5904)
40
(0.64)
>1
>1
0.8 - 1.4
0.8 - 1.4
72
SJ6200
72
Approximate Density,
lb./ft.
3
(g/cm
3
)
80
(1.3)
>1
>1
0.9 - 1.4
0.9 - 1.4
80
(1.3)
>1
>1
0.9 - 1.4
0.9 - 1.4
80
(1.3)
>1
>1
0.9 - 1.4
0.9 - 1.4
Kinetic Coefficient of Friction*
*Two important laws of friction applicable to 3M™ Bumpon™ Resilient Rollstock are: (1) Friction is independent of the area of contact between
solids. (2) Friction is proportional to the load between solid surfaces. Thus, if the load (weight) is doubled, the force required to cause surface
sliding is also doubled. This is expressed mathematically as follows:
Sliding force = (kinetic coefficient of friction) x (weight)
Abrasion Resistance
Taber H 18, 1 kg, g/1000 cycles
Tensile
Elongation, %
Compression Set, %
lb./in.
2
(kPa)
ASTM-C-501
ASTM-D-412, Die A
ASTM-D-412, Die A
ASTM-D-1056
(50% deflection)
ASTM-D-395
(25% deflection)
volts/mil
ASTM-D-1000
UL Classification
*
*
*
8
10
–
–
*
*
1.7 - 1.9
600
(4140)
100
–
–
3
4
200
UL94HB
1.8 - 2.0
120
(830)
100
12
14
–
–
140
UL94HBF
(except SJ5916)
1.7 - 1.9
600
(4140)
100
–
–
3
4
200
UL94HB
1.7 - 1.9
600
(4140)
100
–
–
3
4
200
UL94HB
Dielectric Strength,
Flammability Listing
Stain Resistance**
3M - 24 hrs. @ 158°F against
white paint, 7 days exposed to UV
3M - 30 days @ 50 ppm ozone
3M - 24 hr. immersion
5% Detergent in water
25% Ammonia in water
Bleach
Hydrochloric Acid (
1 normal solution)
Diesel Fuel
Auto Oil
Isopropyl Alcohol
Heptane
Toluol
Lacquer Thinner
No staining observed
No visual deterioration
No apparent effect
No apparent effect
No apparent effect
No apparent effect
No apparent effect
No apparent effect
Slight effect (swelling)
Slight effect (swelling)
Considerable effect (swelling)
Considerable effect (swelling)
Ozone and Oxygen Resistance**
Solvent and Fuel Resistance**
Load Tolerance
Environmental Performance
The “recommended” maximum load which Bumpon Resilient Rollstock series SJ5800, SJ6000 and
SJ6200 will support is 100 psi (690 kPa) at 70°F (21°C) to 120°F (49°C).
Bumpon Resilient Rollstock is intended for interior applications where resilience and all other
physical properties will remain unchanged. When exposed to UV light for extended periods, some
discoloration may occur. Bumpon resilient rollstock may be used outdoors in a protected area with
some discoloration and chalking possible.
*
= Not tested for Bumpon SJ5200 Series (soft foam)
**
= Reference test for time periods specified only.
Results may vary for different product application conditions.
(4)
3M
™
Bumpon
™
Protective Products
Resilient Rollstock
SJ5200
•
SJ5800
•
SJ5900
•
SJ6000
•
SJ6200 Series
Relative Adhesive Performance Characteristics
Note:
The following technical information and data should be considered representative or typical only and should not be
used for specification purposes.
3M™ Bumpon™ Resilient Rollstock
SJ5900 Series
SJ6000 Series
Acrylic
A-20
Poor
Good
Excellent
Excellent
Excellent
Poor
Fair
Excellent
Excellent
SJ5200 Series
SJ6200 Series
Synthetic Rubber
R-25
Excellent
Excellent
Excellent
Good
Fair
Excellent
Excellent
Good
Good
SJ5800 Series
Adhesive:
Adhesion (Peel)
Low Surface Energy:
High Surface Energy:
Static Shear
75°F (25°C):
120°F (49°C):
158°F (70°C)
Initial Adhesion
Low Surface Energy:
High Surface Energy:
Solvent Resistance:
Age Life:
Natural Rubber
R-30
Good
Good
Excellent
Fair
Poor
Good
Good
Good
Good
Adhesive Performance
Note:
The following technical information and data should be considered representative or typical only and should not be
used for specification purposes.
The following table on peel adhesion provide representative performance characteristics of the adhesive systems
used in the construction of 3M™ Bumpon™ Resilient Rollstock SJ5200, SJ5800, SJ5900, SJ6000, and SJ6200
series products.
90° Peel Adhesion
Peel Force, oz. Per 1/2 inch
3M™ Bumpon™ Resilient Rollstock
SJ5900 Series
SJ6000 Series
Acrylic
A-20
3
11
25
25
25
SJ5200 Series
SJ6200 Series
Synthetic Rubber
R-25
52
55
55
55
55
SJ5800 Series
Substrate:
Polypropylene
Polystyrene
ABS
Stainless Steel
Aluminum
Natural Rubber
R-30
25
25
25
22
22
3M Test Method TM-2011; 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock
products SJ5816, SJ6016, and SJ6216.
(5)
京公网安备 11010802033920号
EEWORLD
