Connect the DSP and open Matlab. First, you must change the environment, otherwise the compilation will fail.Type C2000lib to open the library.Add peripherals in C2833X DSP Chip Support, and then add ...
I am a newbie working on a hot water reversing valve project for electric vehicles. I would like to recommend a stepper motor (bipolar four-wire) driver chip. The operating temperature range of the em...
Texas Instruments (TI) has introduced the 150 MHz TMS320C5504 and TMS320C5505 ultra-low-power digital signal processors (DSPs), which provide 25% performance improvement over the previous generation C...
I would like to share with you the problem that Protel99se cannot open PCB on win7 or computers with higher configuration. A great god has made a patch, and it works in actual tests, so I would like t...
At this time, the integrated chip is powered on (5V). If I connect pin 5 (input) to pin 10 (output) of another set of NOT gates, what voltage will it be? I tested it and found that the voltage is 2.7V...
From the previous section, we have learned that the timer/counter in the microcontroller can have multiple uses, so how can I make them work for the purpose I need? This requires setting the timer/cou...