To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FUSB2805 — USB2.0 High-Speed OTG Transceiver with ULPI Interface
September 2013
FUSB2805
USB2.0 High-Speed OTG Transceiver with ULPI Interface
Features
Complies with USB 2.0, OTG Rev 1.3 Supplement,
and ULPI Rev 1.1 Specifications
Supports 480 Mbps, 12 Mbps, and 1.5 Mbps
USB2.0 Speeds
-
-
-
-
Integrated Termination Resistors Meet USB2.0
Resistor ECN
Integrated Serializer and Deserializer
Insertion and Removal of Stuffed Bits
as Appropriate
USB Clock and Data Recovery to ±150ppm
Description
The FUSB2805 is a UTMI+ Low-Pin Interface (ULPI)
USB2.0 OTG transceiver. It is compliant with the
Universal Serial Bus Specification Rev 2.0 (USB2.0),
the ULPI Specification Rev. 1.1, and the On-The-Go
(OTG) supplement to USB2.0, Rev. 1.3.
The FUSB2805 is optimized to connect the USB2.0
host, peripheral, or OTG-controller to the USB
connector via the ULPI link. Data can be transmitted
and received at high speed (480 Mbps), full speed
(12 Mbps), and low speed (1.5 Mbps) through a 12-bit
京公网安备 11010802033920号
EEWORLD
