In general, the differential signal is the difference between two signals, and the common-mode signal is the arithmetic mean of the two signals. Common-mode rejection ratio: the voltage gain of the di...
I just started working and I still have a lot of difficulties in designing. Now I urgently need a test circuit diagram for testing the performance of VDMOS power devices. This power device is used for...
Product composition: A GSM anti-theft host, a shock sensor, a horn, a power-off relay, two remote controllers, an LED light, an emergency button, a MIC, a set of twelve-hole output cables, and an inst...
A complete DSP program consists of at least three parts: program code, interrupt vector table, and link command file (or link configuration file) (*.cmd).The link configuration file determines the opt...
1 Introduction With the continuous development of diode-pumped all-solid-state laser related technologies, it is more and more widely used in the fields of industry, national defense research, biome...
The battery is DC3.0V after LDO, and a 0805 10Uf capacitor is output. Why does it slowly rise from 0V to 3V when tested with an oscilloscope? What's the reason? Is it because the probe capacitance is ...