Tantalum Through-Hole Capacitors – Hermetically Sealed
GR500/T210 Series High Reliability
Overview
The solid tantalum capacitor is an essential device in
circuits requiring high capacitance voltage product and
extended environmental capability. The KEMET GR500
Graded Reliability concept produces state-of-the-art
devices, providing maximum assurance of meeting system
reliability goals. All Graded Reliability capacitors receive
meticulous attention from raw material selection through
manufacture, final inspecton and shipping. Having
survived a very stringent quality control program, the
resulting capacitors meet or exceed the most critical
requirements of space, satellite, missile and medical
applications where failure is, at best, expensive, and at
worst, fatal. KEMET is, therefore, committed to the principle
of the hightest possible reliability in the manufacture and
grading of its GR500 Series capacitors. The KEMET GR500
High Reliability concept disallows grouping of diverse
ratings and production batches to determine average failure
rates. Instead, data from each and every capacitor batch
are statistically fitted to determine failure rate on the basis
of 100% life testing. Each homogeneous production batch
is “graded” as a single inspection lot, and documented
evidence of failure rate achieved is supplied with the parts,
providing assurance of the most sophisticated and accurate
reliability measurement of method in the industry.
Benefits
• 100% Thermal Shock (−65°C to +125°C) prior to
electrical testing
• 100% Surge Current testing.
• 100% Weibull Grading
• 100% X-ray examined
• Hermeticity testing per MIL–STD–202
• Optional Special testing
• Packaged in individual container compartments
• Marking per MIL–STD–1285
• Capacitance values of 0.0047 μF to 330 μF
• Tolerances of ±5%, ±10% and ±20%
• Voltage rating of 6– 100 VDC
• Case sizes: A,B,C,D
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include coupling, bypass, filtering, and RC timing circuits in miniaturized circuitry.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2047_GR500_T210 • 1/26/2017
1
Tantalum Through-Hole Capacitors – Hermetically Sealed
GR500/T210 Series High Reliability
Ordering Information
T
Capacitor
Class
T=
Tantalum
210
Series
210 = GR500/J
(KEMET) High
Reliability, Solid
Electrolyte, Graded,
Hermetic Seal, Axial
Lead, Polar
A
Case
Size
A
B
C
D
105
Capacitance Code
(pF)
K
Capacitance
Tolerance
050
Rated Voltage
(VDC)
006 = 6.3
010 = 10
015 = 15
020 = 20
025 = 25
035 = 35
050 = 50
075 = 75
100 = 100
R
Failure Rate
M = 1%/k hours
P = 0.1/k hours
R = 0.01%/k hours
S = 0.001%/k hours
S
Termination Finish
S = Standard
(Solder-coated
nickel)
First two digits
J = ±5%
represent significant
K = ±10%
figures. Third digit
M = ±20%
specifies number of
zeros to follow.
Performance Characteristics
Item
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz at 25°C)
ESR and Impedance (100 kHz at 25°C)
Leakage Current
Failure Rate
−55°C to 125°C
0.0047 – 330 μF at 120 Hz/25°C
J Tolerance (5%), K Tolerance (10%), M Tolerance (20%)
6 – 100 V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table (at rated voltage up to +85°C and 2/3 of
rated voltage applied at 125°C)
M – 1%/k hours, P – 0.1%/k hours, R – 0.01%/k hours, S – 0.001%/k hours
Performance Characteristics
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2047_GR500_T210 • 1/26/2017
2
stm32/stm8
京公网安备 11010802033920号
EEWORLD
