1.
Low profile achieved with fitted lens and embedded sensing
circuit.
The low profile sensor (Polyethylene: 9.7mm, Silicon-lens: 6mm) is
possible using Panasonic’s proprietary and high-density electronic
component mounting. This technology is achieved by simply embedding
the sensing circuits inside the actual sensor.
( See “Block Diagram” below)
With Silicon-lens sensor, the lens is incorporated in the outer package to
become a pyroelectric sensor module. This makes it easy to mount the
sensor on thin or compact products with limited space.
2.
Motion detection with 3mm diameter miniature flat lens
A 3 mm diameter flat surface lens is possible using Panasonic’s unique
Lens Formation Technology for silicon substrates, making the lens
operating substantially small compared to other conventional sensors.
Security & Wireless Devices
•Security sensors and cameras
•Wireless occupancy sensors
driven by photovoltaic cells or
battery to extend battery life.
Housing & Commercial equipment
• Lighting fixtures and wiring devices
• Video intercoms, HA control panels
• Vending machines etc.
Home appliances ( Energy savings)
• Television and PC monitors
• PC, Air-Conditioners
• Air Purifiers
• Wireless and Battery operated
monitoring sensing devices
3.
1μA low current consumption possible based on Panasonic’s
proprietary design
The development of a specialized circuit allows the reduction of current
consumption to 1μA (*). After motion is detected, the sensor will shift to
“stand-by” mode.
Reduction of Current consumption allows battery life to be extended for
battery driven products. These include wireless based or energy sensitive
devices.
(Note: Product lineup includes: 1μA, 2μA, and 6μA sensors.)
4.
Robust design against false starts
Panasonic PaPIRS sensing circuits are enclosed in a metallic case which
helps minimize the adverse effects of external electro magnetic fields.
(i.e.: radiated noise caused by cellular phones)
Since the sensors have a high S/N ratio, they are less sensitive to false
starts when operated under different environmental surroundings.
Has a built-in amplifier and comparator
connected directly to a microcomputer.
Compliance with RoHS Directive
ORDERING INFORMATION
EKMA
Output:
1:
Digital
1:
1μA
2:
2μA
3:
6μA
Lens Color:
0:
No Lens
1:
White
Lens Material:
2:
Black
Current Consumption:
Detection Range:
1:
Polyethylene
2:
Silicon
Mounting:
1:
TO-5
01:
5m
02:
3m
Ver. 1.1
3. Notes Regarding the Detection Zone
Target
As shown on the diagram, the detection zone is polarized.
If a target enters the detection zones + and – at the same
time, the signals are respectively cancelled and cannot be
detected. (Please refer to the detection area diagram for
details on P.4.)
Detection zone
HOW TO USE
1. Wiring Diagram (Digital Output)
2. Moving Direction Concept
1) Polyethylene-lens type
2) Silicon-lens type