15KPA17Ae3 – 15KPA280CAe3
Compliant
15,000 Watt Transient Voltage Suppressor
(TVS) Protection Device
DESCRIPTION
This device clamps dangerous high-voltage short-term transients such as those produced by
the secondary effects of lightning strikes, providing circuit protection to several class levels in
the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides
protection from transients caused by inductive load dumps, induced RFI, and ESD, providing
protection to IEC61000-4-2 and -4-4.
Important:
For the latest information, visit our website
http://www.microsemi.com.
FEATURES
•
•
•
•
Available in both unidirectional and bidirectional configurations.
5% working voltage tolerance.
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B.
RoHS compliant (2002/95/EC), MSL level 1 (J-STD-020).
P600 Package
APPLICATIONS / BENEFITS
•
•
•
Protection from transients caused by lightning strikes, switching transients, RFI, and ESD.
Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4.
Protection from the secondary effects of lightning per IEC61000-4-5.
MAXIMUM RATINGS
@ 25 ºC unless otherwise noted
Parameters/Test Conditions
Junction and Storage Temperature
Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm)
lead length from body
Thermal Resistance, Junction to Ambient
(1)
Non Repetitive Peak Forward Surge Current
Rated Average Power Dissipation @ T
L
= 75 ºC,
(2)
(0.375 inch (9.5 mm) from body)
Peak Pulse Power Dissipation with a 10/1000 μs waveform
(see
Figure 1)
(3)
Peak Pulse Current with a 10/1000 μs waveform
Symbol
T
J
and
T
STG
R
ӨJL
R
ӨJA
I
FSM
P
M(AV)
P
PP
I
PP
Value
-55 to +175
8.0
77.5
400
8.0
15000
See
Electrical
Table
260
o
Unit
o
C
C/W
C/W
A
W
W
A
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
o
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
Solder Temperature @ 10 s
o
C
Notes:
1. For Unidirectional devices only. Measured on 8.3 ms single half sine-wave or equivalent square wave,
duty cycle = 4 pulses per minute maximum. Also see
Figure 6.
2. Mounted as shown in
Figure 5.
3. Non-repetitive current pulse, per
Figure 3
and derated above T
A
= 25ºC per
Figure 2.
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 1 of 7
15KPA17Ae3 – 15KPA280CAe3
MECHANICAL and PACKAGING
•
•
•
•
•
•
•
CASE: Epoxy body meets UL94V-0.
TERMINALS: Matte-tin plating, fully RoHS compliant. Solderable per MIL-STD-750, method 2026.
MARKING: Manufacturer ID, date code and part number.
POLARITY: For unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal
TVS operation.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 0.07 ounce (2.0 grams).
See
Package Dimensions
on last page.
PART NOMENCLATURE
15
Peak Pulse Power
Kilowatt Rating
Encapsulated Plastic
Package
Axial-leaded Device
Stand-off Voltage Rating
(see
Electrical Characteristics
table)
K
P
A
17
C
A
e3
RoHS Compliance
5%Voltage Tolerance
Polarity
C = Bi-directional
Blank = Unidirectional
Symbol
α
V(BR)
V
W M
P
PP
V
(
BR)
I
D
I
PP
V
C
SYMBOLS & DEFINITIONS
Definition
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in
temperature that caused it expressed in %/°C or mV/°C.
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that
may be continuously applied over the standard operating temperature.
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The
impulse power is the maximum-rated value of the product of I
PP
and V
C
.
Breakdown Voltage: The voltage across the device at a specified current I
(BR)
in the breakdown region.
Standby Current: The current through the device at rated stand-off voltage.
Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an
external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.
Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an
impulse current (I
PP
) for a specified waveform.
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 2 of 7
15KPA17Ae3 – 15KPA280CAe3
ELECTRICAL CHARACTERISTICS
@ 25 ºC
BREAKDOWN
VOLTAGE
(2)
, V
(BR)
V
(BR)
@
I
(BR)
(Volts)
Min
18.99
20.11
22.34
24.57
26.81
29.04
31.28
33.51
36.90
40.20
44.70
48.00
50.30
53.60
57.00
60.30
64.80
67.00
71.50
78.20
83.80
87.10
94.90
100.50
111.70
122.90
134.00
145.20
167.60
178.70
189.90
201.10
223.40
245.70
268.10
290.40
312.80
Max
20.79
22.01
24.46
26.91
29.35
31.80
34.24
36.70
40.40
44.00
48.90
52.60
55.00
58.70
62.40
66.00
70.90
73.40
78.30
85.60
91.70
95.40
104.00
110.10
122.30
134.50
146.80
159.00
183.50
195.70
207.90
220.10
244.60
269.10
293.50
318.00
342.40
TEST
CURRENT
I
(BR)
(mA)
STAND-
OFF
VOLTAGE
V
WM
(Volts)
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
220
240
260
280
MAXIMUM
STANDBY
CURRENT
(4)
I
D
@ V
WM
(µA)
5000
5000
1500
500
150
50
25
15
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
MAXIMUM
PEAK PULSE
CURRENT
(3)
I
PP
(A)
515.4
488.7
440.2
407.0
371.0
343.2
317.9
297.8
276.1
252.5
229.5
216.3
207.4
194.3
182.1
172.2
161.0
155.0
144.9
132.9
123.8
119.7
109.7
103.7
93.6
84.5
78.5
72.5
62.4
58.4
55.4
52.3
47.3
35.2
39.3
36.2
33.2
MAXIMUM
CLAMPING
VOLTAGE
V
C
@ I
PP
(Volts)
29.3
30.9
34.3
37.1
40.7
44.0
47.5
50.7
54.7
59.8
65.8
69.8
72.8
77.7
82.9
87.7
93.8
97.4
104.2
113.6
122.0
126.1
137.6
145.6
161.3
178.6
192.3
208.3
241.9
258.6
272.7
288.5
319.1
356.0
384.6
416.7
454.5
MAXIMUM
TEMPERATURE
COEFFICIENT
α
V(BR)
(%/ °C)
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
DEVICE
15KPA17Ae3 / 15KPA17CAe3
15KPA18Ae3 / 15KPA18CAe3
15KPA20Ae3 / 15KPA20CAe3
15KPA22Ae3 / 15KPA22CAe3
15KPA24Ae3 / 15KPA24CAe3
15KPA26Ae3 / 15KPA26CAe3
15KPA28Ae3 / 15KPA28CAe3
15KPA30Ae3 / 15KPA30CAe3
15KPA33Ae3 / 15KPA33CAe3
15KPA36Ae3 / 15KPA36CAe3
15KPA40Ae3 / 15KPA40CAe3
15KPA43Ae3 / 15KPA43CAe3
15KPA45Ae3 / 15KPA45CAe3
15KPA48Ae3 / 15KPA48CAe3
15KPA51Ae3 / 15KPA51CAe3
15KPA54Ae3 / 15KPA54CAe3
15KPA58Ae3 / 15KPA58CAe3
15KPA60Ae3 / 15KPA60CAe3
15KPA64Ae3 / 15KPA64CAe3
15KPA70Ae3 / 15KPA70CAe3
15KPA75Ae3 / 15KPA75CAe3
15KPA78Ae3 / 15KPA78CAe3
15KPA85Ae3 / 15KPA85CAe3
15KPA90Ae3 / 15KPA90CAe3
15KPA100Ae3 / 15KPA100CAe3
15KPA110Ae3 / 15KPA110CAe3
15KPA120Ae3 / 15KPA120CAe3
15KPA130Ae3 / 15KPA130CAe3
15KPA150Ae3 / 15KPA150CAe3
15KPA160Ae3 / 15KPA160CAe3
15KPA170Ae3 / 15KPA170CAe3
15KPA180Ae3 / 15KPA180CAe3
15KPA200Ae3 / 15KPA200CAe3
15KPA220Ae3 / 15KPA220CAe3
15KPA240Ae3 / 15KPA240CAe3
15KPA260Ae3 / 15KPA260CAe3
15KPA280Ae3 / 15KPA280CAe3
50
50
20
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
NOTES:
(1) All ratings at 25 ºC unless specified otherwise.
(2) V
(BR)
measured after I
(BR)
applied for 300 µs, I
(BR)
= square wave pulse or equivalent.
(3) Surge current waveform per
Figure 3
and derated per
Figure 2.
(4) For bidrectional types with V
WM
of 30 volts and less, the I
D
limit is doubled.
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 3 of 7
15KPA17Ae3 – 15KPA280CAe3
GRAPHS
P
PP
– Peak Pulse Power (kW)
t
d
– Pulse Width (sec.)
FIGURE 1
Peak Pulse Power Rating Curve
Peak Pulse Power (P
PP
) or Current (l
PP
)
Derating in Percentage%
T
A
Ambient Temperature (°C)
FIGURE 2
Pulse Derating Curve
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 4 of 7
15KPA17Ae3 – 15KPA280CAe3
GRAPHS
(continued)
Pulse Current in Percent of I
PP
t – Time – ms
Test waveform parameters: tr=10 µs, tp=1000 µs
FIGURE 3
Pulse Waveform for 10/1000 Exponential Surge
C
T
, Total Capacitance (pF)
V
(BR)
– Reverse Breakdown Voltage (V)
FIGURE 4
Typical Junction Capacitance
RF01131, Rev. A (6/24/13)
©2013 Microsemi Corporation
Page 5 of 7
京公网安备 11010802033920号
EEWORLD
