Electric Double Layer Capacitors(Gold Capacitor)/EN
Surface Mount Type
Series:
EN
n
Feature
1.Re-flow soldering method available (240°C)
2.Miniaturized : Diaφ6.8 x height 1.8mm max.
3.Longer life and environmentally friendly
Country of Origin
Japan
n
Recommended Applications
n
Specifications
Category temp. range
Maximum Operating Voltage
Memory cards(power supply to hold memory),
mobile phones, PDAs, digital cameras.
-10 to +60°C
3.3 V .DC
0.2 F
10 µA MAX
Category temp. range(-10°C)
Capacitance change ±30% of initial measured value at +20°C
Internal resistance
<10
times of initial measured value at +20°C
Category temp. range(+60°C)
Capacitance change
Internal resistance
±30% of initial measured value at +20°C
<
measured value at +20°C
After 500 hours application of 3.3V. DC at +60°C, the capacitor shall meet the following limits.
Capacitance change ±30% of initial measured value
Internal resistance
<
20 times of initial specified value
After 500 hours storage at +60°C without load, the capacitor shall meet the specified limits
for Endurance.
Nominal Capacitance
Maximum Operating Current
Stability at low
temperature and high
temperature
Endurance
Shelf Life
High temperature
High humidity
After 500 hours storage at +40°C, 90 to 95% R.H., the capacitor shall meet the following
limits.
Capacitance change ±30% of initial measured value
Internal resistance
<
1 k ohm or less
n
Dimensions in mm (not to scale)
Type A
2.0
±
0.3
1.4
±
0.3
0.15
±
0.05
6.8 max.
1.4
±
0.2
6.8 max.
Type RL
Type Ji
6.8 max.
1.85 max.
6.95
– 0.25
0.15
– 0.2
(1.24)
0.9±0.3
6.8 max.
5.9
±
0.1
11.3
±
0.3
0.15±0.05
10.0max.
+0.1
1.9
±
0.2
1.8max.
0.5±0.1
2±0.3
0.15±0.03
+0.1
0.9±0.3
1.9±0.4
n
Standard Products
Maximum Oper-
ating Voltage
(V.DC)
The re-flow condition / taping dimensions are explained on p.205 of our Catalog.
Please use it as a reference guide.
( ): Please use A,RL or J1 to indicate terminal type.
Note: 1.When the capacitor is being used in a high temperature and high humidity environment for a long period,
brown deposited materials might be found around the sealing area. However, the materials are insulators
and will not affect any electrical characteristcs of the capacitor.
2.Do not use reflow soldering when cell voltage is above 0.3V.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
June. 2005
2.5
±
0.3
1.8max.
Capacitance
(F)
Capacitance
range
(F)
Internal
resistance
(Ω) at 1kHz
Mass
Min. Packaging
QTY
Part number
(g)
0.2 (Approx.)
Reel (pcs)
3.3
0.2
0.16 to 0.36
200
EECEN0F204( )
2000
—
EE200
—