Resistance to sulphur-bearing gas (AS version only): ASTM-B-809
Voltage proof
Volts
Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
ΔR%
ΔR%
ΔR%
ΔR%
ΔR%
1
1
1
0.25
0.25
0.25
500
ΔR%
ΔR%
Maximum
1
0.1
Zero at 155°C
0.1
0.2
0.25
0.05
0.05
0.05
Typical
0.25
0.02
Pulse Performance Data
Pulse Performance Data
Lightning Surge
Lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Lightning Surge
Lightning surge resistors are tested in
accordance with IEC 60 115-1 using
both 1.2/50µs and 10/700µs pulse shapes.
10 pulses are applied. The limit of
acceptance is a shift in resistance of less
than 1% from the initial value.
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The traditional Chinese New Year is no longer my cup of tea. The weather in a provincial capital like Chengdu is cold, the air is not very good, and the sky is gray and hazy. So after discussing with ...
Myth 1: Cure all diseases
The truth: 802.11ax cannot solve the problems caused by incorrect planning and designFor wireless networks, planning and design are of utmost importance! Only by adhering to ...
I use the ad09 software. After importing the schematic into the PCB, there is a column of packages that I cannot select, as shown in the black arrow in the picture. And when I use the scroll wheel to ...
[i=s]This post was last edited by YangTwo on 2021-8-9 22:49[/i]First, download the development environment from the official website [click me] :Double-click the setup.exe file in the downloaded ISO t...
describe
With the Wireless Patient Temperature Application Note, use the temperature sensing evaluation board to provide up to ±0.1°C accuracy.
Reference Design
Design Difficulties of Wireless Patient...
Talking
京公网安备 11010802033920号
EEWORLD
