Integrated Device Technology, Inc. reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance
and to supply the best possible product. IDT does not assume any responsibility for use of any circuitry described other than the circuitry embodied in an IDT product. The
Company makes no representations that circuitry described herein is free from patent infringement or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent, patent rights or other rights, of Integrated Device Technology, Inc.
LIFE SUPPORT POLICY
Integrated Device Technology's products are not authorized for use as critical components in life support devices or systems unless a specific written agreement pertaining to
such intended use is executed between the manufacturer and an officer of IDT.
1. Life support devices or systems are devices or systems which (a) are intended for surgical implant into the body or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.
2. A critical component is any components of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device
or system, or to affect its safety or effectiveness.
Table of Contents
TABLE OF CONTENTS ........................................................................................................................................................... 3
LIST OF TABLES .................................................................................................................................................................... 4
LIST OF FIGURES ................................................................................................................................................................... 5
FEATURES .............................................................................................................................................................................. 6
3.2.1 M-LVDS to LVTTL................................................................................................................................ 11
LVTTL DC Parameters ................................................................................................................................ 11
LVTTL AC Parameters................................................................................................................................. 11
M-LVDS Type-1 Receiver Input Threshold Test Voltages ........................................................................... 12
M-LVDS DC Parameters.............................................................................................................................. 13
M-LVDS Input Current Parameters.............................................................................................................. 15
M-LVDS AC Parameters.............................................................................................................................. 16
M-LVDS Type-1 Receiver AC Parameters .................................................................................................. 17
M-LVDS Driver AC Parameter ..................................................................................................................... 17
Today at 10:00 am TI Award Live: Low-power wireless technology for building automation sensor applicationsClick here to enter the live broadcastLive broadcast time: March 10, 10:00-11:30 am
Live Topic...
In the past, I made direct-insert PCBs. I usually set the line width of the power and ground lines to 50 mils, and the other lines to 30 mils. Now I want to make a PCB with both SMD and direct-insert ...
At first, the UART_Keyboard of the official example program always failed to run on the computer, so I went online to learn about the specific process of UART implementation, modified the official exa...
1. What is the starting address of the DSP after reset?0x3FFFC02. What are the steps for burning the program in the emulator?Burn the program to the specified location according to the cmd file, and t...
On March 25th (Wednesday) from 14:30 to 16:00,Tektronix senior engineer Lao Bai will chat with you online about oscilloscopes!
Note: This live broadcast is mainly for lottery, followed by small talkPa...
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
