The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Typical Applications
• Base station infrastructure
• Portable Wireless
• CATV & DBS
• MMDS & Wireless LAN
General Description
Gali
84+ (RoHS compliant) is a wideband amplifier offering high dynamic range. Lead finish is SnAgNi.
It has repeatable performance from lot to lot, and is enclosed in a SOT-89 package. It uses patented
Transient Protected Darlington configuration and is fabricated using InGaP HBT technology. Expected
MTBF is 1200 years at 85°C case temperature. Gali 84+ is designed to be rugged for ESD and supply
switch-on transients.
simplified schematic and pin description
RF-OUT and DC-IN
RF IN
3 RF-OUT & DC-IN
4
2 GROUND
1 RF-IN
GROUND
Function
RF IN
Pin Number
1
Description
RF input pin. This pin requires the use of an external DC blocking capacitor chosen
for the frequency of operation.
RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended
Application Circuit”.
Connections to ground. Use via holes as shown in “Suggested Layout for PCB
Design” to reduce ground path inductance for best performance.
RF-OUT and DC-IN
3
GND
2,4
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Mini-Circuits
®
REV. A
M108520
ED-11756/3E
GALI-84+
131211
Page 1 of 4
Monolithic InGaP HBT MMIC Amplifier
Electrical Specifications at 25°C and 100mA, unless noted
Parameter
Frequency Range*
Gain
f=0.1 GHz
f=1 GHz
f=2 GHz
f=3 GHz
f=4 GHz
f=6 GHz
f=0.1 GHz
f=1 GHz
f=2 GHz
f=3 GHz
f=4 GHz
f=6 GHz
f=0.1 GHz
f=1 GHz
f=2 GHz
f=3 GHz
f=4 GHz
f=6 GHz
f=0.1 GHz
f=1 GHz
f=2 GHz
f=3 GHz
f=4 GHz
f=6 GHz
f=2 GHz
f=0.1 GHz
f=1 GHz
f=2 GHz
f=3 GHz
f=4 GHz
f=6 GHz
f=0.1 GHz
f=1 GHz
f=2 GHz
f=3 GHz
f=4 GHz
f=6 GHz
f=0.1 GHz
f=1 GHz
f=2 GHz
f=3 GHz
f=4 GHz
f=6 GHz
f=0.1 GHz
f=1 GHz
f=2 GHz
f=3 GHz
f=4 GHz
f=6 GHz
f=2 GHz
Gali
84+
Min.
DC
24.3
18.2
14.3
25.6
22.7
19.2
16.7
15.0
11.8
0.0025
0.0036
0.0045
0.0057
0.0074
0.0148
25.8
21.2
18.0
15.6
14.7
16.7
16.3
11.0
8.9
9.0
9.7
8.4
26.5
21.9
21.5
21.2
20.9
19.2
15.5
23.0
22.6
22.1
21.7
20.3
17.1
37.6
37.8
38.0
37.4
34.7
32.7
4.2
4.4
4.4
4.4
4.6
5.3
94
100
5.8
-3.6
3.3
64
Typ.
Max.
6
26.9
20.2
15.8
Units
GHz
dB
Cpk
>1.5
Magnitude of Gain Variation versus Temperature
(values are negative)
dB/°C
0.0090
Input Return Loss
dB
14.0
Output Return Loss
dB
6.0
Reverse Isolation
Output Power @1 dB compression
22
20.8
20.4
20.1
dB
dBm
>1.5
Saturated Output Power
(at 3dB compression)
dBm
Output IP3
33.8
34.0
34.2
dBm
>1.5
Noise Figure
dBm
>1.5
Group Delay
Recommended Device Operating Current
Device Operating Voltage
Device Voltage Variation vs. Temperature at 100mA
Device Voltage Variation vs Current at 25°C
Thermal Resistance, junction-to-case
1
5.4
6.2
psec
mA
V
mV/°C
mV/mA
°C/W
>1.5
*
Guaranteed specification DC-6 GHz. Low frequency cut off determined by external coupling capacitors.
Absolute Maximum Ratings
Parameter
Operating Temperature*
Storage Temperature
Operating Current
Power Dissipation
Input Power
Ratings
-45°C to 85°C
-65°C to 150°C
160mA
1W
13 dBm
Note: Permanent damage may occur if any of these limits are exceeded.
These ratings are not intended for continuous normal operation.
1
Case is defined as ground leads.
*Based on typical case temperature rise 9°C above ambient.
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Mini-Circuits
®
Page 2 of 4
Monolithic InGaP HBT MMIC Amplifier
Product Marking
4
Gali
84+
84
1
2
3
Markings in addition to model number designation may appear for internal quality control purposes.
Additional Detailed Technical Information
Additional information is available on our web site. To access this information enter the model number on
our web site home page.
Performance data, graphs, s-parameter data set (.zip file)
Case Style: DF782
Plastic package, exposed paddle, lead finish: tin-silver over nickel
Tape & Reel: F55
7” reels with 20, 50, 100, 200, 500, 1K devices.
Suggested Layout for PCB Design: PL-019
Evaluation Board: TB-409-84+
Environmental Ratings: ENV08T2
Recommended Application Circuit
R bias (R equired)
V cc
C bypas s
C block
IN
1
2
4
Ibias
3
Vd
C block
R F C (Optional)
OUT
R BIAS
Vcc
8
9
10
11
12
13
14
15
16
17
18
19
20
“1%” Res. Values (ohms)
for Optimum Biasing
22.1
32.4
42.2
52.3
61.9
71.5
82.5
93.1
102
113
121
133
140
Test Board includes case, connectors, and components (in bold) soldered to PCB
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Mini-Circuits
®
Page 3 of 4
Monolithic InGaP HBT MMIC Amplifier
ESD Rating
Gali
84+
Human Body Model (HBM): Class 1C (1000v to < 2000v) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M2 (< 100v) in accordance with ANSI/ESD STM 5.2 - 1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C
No.
1
Test Required
Visual Inspection
Condition
Low Power Microscope
Magnification 40x
Room Temperature
Less than 10% growth in term of
delamination
Bake at 125°C for 24 hours
Soak at 85°C/85%RH for 168 hours
Reflow 3 cycles at 260°C peak
Standard
MIP-IN-0003
(MCT spec)
SCD
(MCL spec)
J-Std-020C
(Jedec Standard)
J-Std-020C
(Jedec Standard)
Quantity
45 units
2
Electrical Test
45 units
3
SAM Analysis
Moisture Sensitivity
Level 1
45 units
4
45 units
MSL Test Flow Chart
Start
Visual
Inspection
Electrical Test
SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test
SAM Analysis
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
京公网安备 11010802033920号
EEWORLD
