PIN RECEPTACLES
With Organic Fibre Plug® Solder Barrier
(see specific contact range on pages 216, 217, 218 & 221)
• These through-hole (tubular) receptacles are designed for
hand, wave or reflow* soldering. The
ORGANIC FIBRE PLUG®
barrier prevents solder, paste or flux from contaminating the
spring contact.
• After soldering, the
OFP®
barrier is pushed out of the recep-
tacle when the device is plugged in.
• All parts are available as discrete receptacles; but for SMT
assembly, certain receptacles are supplied on carrier tape per
EIA-481 to feed industry standard pick and place machines.
PR
E
CI
.030
.088
.006
M
ON
S
I
CHI
A
PINS
*Intrusive reflow (also called "pin-in-paste") is a technique of using conventional
through-hole components in a reflow soldering process. The receptacles are
placed into plated through-holes in the circuit board (solder paste has previous-
ly been screen printed on pads adjacent to the holes) and the board is reflowed in the same pass as other SMT components.
Solder will fill the plated through-holes and achieve solder joints as reliable as wave soldering. The OFP® barrier prevents solder
paste from being picked-up inside the contact during pick ‘n place assembly. "Overprinting" paste on the solder mask can be
used to adjust the volume of paste required to fill each hole.
NE
D
5359
.048 DIA.
.038 DIA.
.010
.060
0577
.058 DIA.
.025
.086
.100
4015
.068 DIA.
.052 DIA.
.020
.089 .100
3435
.072 DIA.
.064 DIA.
.061 DIA.
.130
.210
.071
.040 DIA.
.043 DIA.
.028 DIA.
.006
.031 DIA.
.006
.043 DIA.
.006
.036 DIA.
5359-0-XX-XX-10-XX-10-0
0577-0-XX-XX-21-XX-10-0
4015-0-XX-XX-30-XX-10-0
3435-0-XX-XX-47-XX-04-0
Solder mount in Ø.046±.003 PTH.
#47
Contact for Ø.025-.036 and
.025” square pins.
Solder mount in Ø.043±.003 PTH. Solder mount in Ø.045±.003 PTH. Solder mount in Ø.057±.003 PTH.
#10
Contact for Ø.012-.017 pins.
#30
Contact for Ø.015-.025 pins.
#21
Contact for Ø.015-.022 pins.
Also available on 16mm wide carrier Also available on 12mm wide carrier Also available on 8mm wide carrier
tape: 3,000 parts per 13” reel.
tape: 5,500 parts per 13” reel.
tape: 3,000 parts per 13” reel.
SPECIFICATIONS
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
SOLDER BARRIER:
Organic Fibre Plug®
DIMENSION IN INCHES
TOLERANCES ON:
LENGTHS:
±.005
DIAMETERS: ±.002
ANGLES:
± 2°
ORDER CODE: XXXX - 0 - XX - XX - XX - XX -10 - 0
BASIC PART #
SPECIFY PACKAGING:
SPECIFY CONTACT FINISH:
43
Discrete Receptacles
27
30µ" GOLD OVER NICKEL
67
Supplied on 13” Reels
02
100µ" TIN/LEAD OVER NICKEL
SPECIFY SHELL FINISH:
84
100µ" TIN OVER NICKEL
01
200µ" TIN/LEAD OVER NICKEL
80
200µ" TIN OVER NICKEL
CONTACT #
#10, #21, #30 or #47
CONTACT (DATA ON PAGES 216, 217, 218 & 221)
2002/95/EC
RoHS
w w w. m i l l - m a x . c o m
164
516-922-6000
京公网安备 11010802033920号
EEWORLD
