TRU050-TECHA-34M3680000 datasheet, PDF

Datasheet> All Categories > Analog mixed-signal IC> The signal circuit> TRU050-TECHA-34M3680000

TRU050-TECHA-34M3680000: DescriptionPhase Locked Loop, CDIP16, SMD-16; CategoryAnalog mixed-signal IC The signal circuit; File Size172KB，14 Pages; ManufacturerVectron International, Inc.; Websitehttp://www.vectron.com/; Environmental Compliance

Download Datasheet Parametric View All

TRU050-TECHA-34M3680000 Overview

Phase Locked Loop, CDIP16, SMD-16

TRU050-TECHA-34M3680000 Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Vectron International, Inc.
Parts packaging code	DIP
package instruction	DIP,
Contacts	16
Reach Compliance Code	compliant
Analog Integrated Circuits - Other Types	PHASE LOCKED LOOP
JESD-30 code	R-CDIP-T16
JESD-609 code	e4
length	20.32 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	16
Maximum operating temperature	70 °C
Minimum operating temperature
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	DIP
Package shape	RECTANGULAR
Package form	IN-LINE
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
Maximum seat height	4.69 mm
Maximum supply voltage (Vsup)	5.5 V
Minimum supply voltage (Vsup)	4.5 V
Nominal supply voltage (Vsup)	5 V
surface mount	NO
Temperature level	COMMERCIAL
Terminal surface	Gold (Au) - with Nickel (Ni) barrier
Terminal form	THROUGH-HOLE
Terminal pitch	2.54 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	40
width	7.62 mm
Base Number Matches	1

Preview

Download Datasheet

View All

TRU050

Complete VCXO based Phase-Locked Loop

Features

•

Output Frequencies to 65.536 MHz

•

5.0 V or 3.3Vdc Operation

•

Tri-State Output

•

Holdover on Loss of Signal Alarm

•

VCXO with CMOS Outputs

•

0/70° or –40/85°C Temperature Range

•

Ceramic SMD Package

•

RoHS/Lead Free Compliant

The TRU050, VCXO based PLL

Description

The VI TRU050 is a user-configurable crystal-based

PLL integrated circuit. It includes a digital phase

detector, op-amp, VCXO and additional integrated

functions for use in digital synchronization

applications. Loop filter software is available as well

SPICE models for circuit simulation.

Applications

•

Frequency Translation

•

Clock Smoothing

•

NRZ Clock Recovery

•

DSLAM, ADM, ATM, Aggregation, Optical

Switching/Routing, Base Station

•

Low Jitter PLL’s

Figure 1. TRU050 Block Diagram

Tel: 1-88-VECTRON-1

•

Web:

www.vectron.com

Page 1 of 14

Rev: 26Aug2008

Vectron International, 267 Lowell Rd, Hudson NH 03051-4916

TRU050, VCXO Based PLL

TRU050 Theory of Operation

Phase Detector

The phase detector has two buffered inputs, DATAIN and CLKIN, which are designed to switch at 1.4 volts.

DATAIN is designed to accept an NRZ data stream but may also be used for clock signals which have about

a 50% duty cycle. CLKIN is connected to OUT1 or OUT2, or a divided version of one of these outputs. CLKIN

and DATAIN and are protected by ESD diodes and should not exceed the power supply voltage or ground by

more than a few hundred millivolts.

The phase detector is basically a latched flip flop/exclusive-or gate/differential amplifier filter design to

produce a DC signal proportional to the phase between the CLKIN and DATAIN signals, see figure 4 for a

block diagram and figure 5 for a open loop transfer curve. This simplies the PLL design as the designer does

not have to filter narrow pulse signal to a DC level. Under locked conditions the rising edge CLKIN will be

centered in the middle of the DATAIN signal, see figure 6.

The phase detector gain is 0.53V/rad x data density for 5volt operation, and 0.35V/rad x data density for 3.3

volt operation. Data density = 1.0 for clock signals and is system dependent on coding and design for NRZ

signals, but 0.25 could be used as a starting point for data density.

The phase detector output is a DC signal for DATAIN frequencies greater than 1MHz but produces signficant

ripple when inputs are less than 200kHz. Additional filtering is required for low input frequency applications

such as 8kHz frequency translation, see figures 8 and 9.

Under closed loop conditions the active filter has a blocking capacitor which provides a very high DC gain, so

under normal locked conditions and input frequencies >1MHz, PHO will be about V

/2 and will not vary

signifigantly with changes in input frequency (within lock range). The control (voltage pin 1) will vary

according to the input frequency offset, but PHO will remain relatively constant.

Data In

(pin 7)

Clock In

(pin 9)

30 kΩ

20 kΩ

PHO

(pin 6)

Gain = 5 V / 2π

Gain = 2 / 3

Figure 4. Simplified Phase Detector Block Diagram

Vectron International, 267 Lowell Rd, Hudson NH 03051-4916

Page 4 of 14

Tel: 1-88-VECTRON-1

•

Web:

www.vectron.com

Rev: 26Aug2008

Recommended Resources

Three-phase asynchronous motor forward and reverse manual control circuit

Emitter coupled RC oscillator

Sipu soft starter one use and one backup control circuit

Unijunction transistor triggers thyristor circuit via pulse transformer

Hydraulic pressure automatic control circuit

How to add c files in esp32 idf components to compile: Add the path of the header file in the makefile INC_ESPCOMP += -I$(ESPCOMP)/esp_http_client/include INC_ESPCOMP += -I$(ESPCOMP)/json/cJSON INC_ESPCOMP += -I$(ESPCOMP)/nghttp/port/include Then where sh...; zhuxiaosuan MicroPython Open Source section

Have you noticed the LPDSP32 audio codec inside RSL10? Does your project use this resource?: Have you noticed the LPDSP32 audio codec inside RSL10? Does your project use this resource? Today I accidentally noticed that there is an audio codec inside the RSL10 I wonder if ON has any voice reco...; 蓝雨夜 onsemi and Avnet IoT Innovation Design Competition

Will the push-pull circuit be straight through?: The step-down circuit shown in the figure In normal operation, if there is a sudden power failure, that is, all three power supplies are gone, and then the power is turned on again When the op amp U1 ...; shaorc Analog electronics

Shenzhen to build automotive electronics base with output value of RMB 40 billion in 2010: In 2005, the sales of Shenzhen's automotive electronics industry reached 16 billion yuan, and five years later, this figure will double due to the promotion of the automotive electronics industry clus...; frozenviolet Automotive Electronics

Award-winning live broadcast: Third-generation TI C2000 new features resource update: Click to register Live broadcast time March 24, 10:00-11:30amLive Topic Third Generation TI C2000 New Features Resource UpdateLive content Compared with the second-generation C2000, the third-generati...; EEWORLD社区 Integrated technical exchanges

EEWORLD University - Industrial Internet of Things using CC1310 sub-1 GHz wireless MCU: Industrial IoT using CC1310 sub-1 GHz wireless MCU : https://training.eeworld.com.cn/course/4976...; wanglan123 RF/Wirelessly

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components