This circuit can automatically disconnect the charging or discharging circuit of two nickel-cadmium batteries when they are charged to 3V or discharged to 1.34V, effectively preventing overcharging or...
When I was referring to the design of an AVR (ATMEGA644PA-AU) chip, I found that the ISP download line uses the SPI port, which is the interface of PIN1, PIN2, and PIN3, while the JTAG interface in th...
The core content of "Modeling and Evaluation of Real-time Systems in Automotive Electronic/Electrical Architecture" is to model and evaluate within the scope of automotive electronic/electrical archit...
The 2022 Digi-Key Electronic Innovation Design Competition is in full swing!
No limit on development boards , products or solutions , andthere is also tens of thousands of cash waiting for you to win!...
Is there any example code for c8051f040 CAN communication, preferably with comments, or some information about it? This is my first time to use CAN communication, so please give me some advice! !...
Since the SPI chip select pin of DSP28335 can only be pulled high after more than 20us after sending, the IO port is used to simulate SPISTE. The timing diagram obtained is as follows (sending two AA ...