Model 2249
Cable Assembly with BNC
Male on Each End
FEATURES:
The molded strain relief is directly bonded to the cable jacket for superior strength and durability.
Teflon insulation and nickel tarnish resistant outer shells used in the BNC connector provide long life and
reliability.
Gold plated center contacts assure the most noise free connection possible.
The connectors and cable are impedance matched.
CABLE DESIGNATION & TYPE:
2249-C:
RG58C/U, 50 ohm cable makes it ideal for most test and measurement applications, RF
transmission systems and Thinnet LAN applications.
RG59B/U, 75 ohm cable assembly for use with broadcast, video, and other signal
2249-E:
applications.
2249-K:
RG174/U, smaller diameter 50 ohm cable for greater flexibility in tight applications. It is
best suited for use in low power situations where small size and flexibility is important.
2249-M:
RG62A/U, 93 ohm cable, use when higher impedance, > 75 ohms is required.
2249-Y:
RG223/U, double shielded 50 ohm cable assembly for superior interference rejection.
RATINGS:
Cable
Designation
C
E
K
M
Y
Type
RG58C/U
RG59B/U
RG174/U
RG62A/U
RG223/U
Impedance
ohms
50
75
50
93
50
Capacitance Power Loss
Wire
per 1 foot / /100 Ft @ Insulation AWG Strands X
Type
AWG
0,304 meters
1 MHz
30.8 pf
22.5 pf
30.8 pf
13.5 pf
30.8 pf
0.44 dB
0.60 dB
1.90 dB
0.25 dB
0.35 dB
PE
PE
PE
SSPE
PE
20
23
26
22
19
19X36
Solid
7X34
Solid
Solid
TC
BCCS
SPC
Center
Jacket
Material
PVCNC
PVC
PVCNC
Cable
OD
.195
.242
.110
.242
.212
Temperature
Shield
TCB
BCB
TCB
BCB / BCB
SCB / SCB
(w/o connectors)
°C
-40 to +85
-40 to +60
-40 to +75
0 to +75
-40 to +60
BCCS PVCNC
BCCS PVCNC
AWG = American Wire Gauge
BCB = Bare Copper Braid
BCCS = Bare Copper Covered Steel
PE = Polyethylene
PVC = Polyvinyl Chloride
PVCNC = Polyvinyl Chloride Non-Contaminating
SCB = Silver Coated Braid
SPC = Silver Plated Copper
SSPE = Semi-Solid Polyethylene
TC = Tinned Copper
TCB = Tinned Copper Braid
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 (technicalsupport@pomonatest.com)
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1093883
Page 1 of 2
Model 2249
Cable Assembly with BNC
Male on Each End
Voltage: 500 Vrms max from center conductor to shield and 33 Vac / 70 Vdc max from shield to earth in
controlled hands free testing environments.
For CE compliance:
not intended for hand-held use at voltage
above 33 Vrms / 70 Vdc.
MATERIALS:
BNC Male:
Body: Brass, Tarnish Resistant Nickel Plating
Dielectric: PTFE
Center Contact: Gold Plated Brass
Strain Relief:
PVC molded directly to cable and connectors
ORDERING INFORMATION: Model 2249-type-length*
Cable Type: C, E, K, M, Y. (see table for detail).
Cable Length*: 6” (15,24cm), 12” (30,5cm), 24” (61,0cm), 36” (91,4cm), 48” (121,9cm), 60” (152,4cm),
72” (182,9cm), 96” (243,84cm), 120” (304,8cm), 144” (365,76cm), 180” (457,2cm), 240” (6096cm),
300” (762cm), 360” (914,4cm), 600” (1524cm).
Ordering Example: 2249-C-72 (type “C” cable with a 72” (182,9cm) length)
*
Custom lengths are available, contact Pomona Technical Support: 800-241-2060 (technicalsupport@pomonatest.com)
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 (technicalsupport@pomonatest.com)
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1093883
Page 2 of 2