METALLIZED POLYPROPYLENE
DRY ROUND MOTOR RUN
X390
PAGE 4 OF 4
GENERAL SPECIFICATIONS
PHYSICAL CHARACTERISTICS
CONSTRUCTION:
NON-INDUCTIVE WOUND METALLIZED POLYPROPYLENE.
CASE:
PHENOLIC CASE AND EPOXY FILL.
LEAD MATERIAL:
DUAL AMP250 QUICK DISCONNECT TERMINALS.
DIMENSIONS:
AS SPECIFIED IN TABLES.
ELECTRICAL CHARACTERISTICS
CAPACITANCE:
AS SPECIFIED IN TABLES ± REQUESTED TOLERANCE WHEN MEASURED AT OR
REFERRED TO 60 ± 5 HZ AND 25 ± 5 °C. OTHER CAPACITANCE VALUES AVAILABLE UPON REQUEST.
TOLERANCE:
±3%, ±5%, ±6%, AND ±10% AVAILABLE. OTHER TOLERANCES AVAILABLE UPON
REQUEST.
DISSIPATION FACTOR:
SHALL NOT BE GREATER THAN 0.1% WHEN MEASURED AT OR REFERRED TO
60 ± 5 HZ AND 25 ± 5 °C.
DIELECTRIC STRENGTH:
150% RATED VOLTAGE FOR 1 TO 5 SECONDS AT 25 ± 5 °C.
RATED VOLTAGE:
240VAC, 330VAC, AND 370VAC AVAILABLE. ALL RATINGS ARE FOR 50/60 HZ
OPERATION ONLY. OTHER VOLTAGE RATINGS AVAILABLE UPON REQUEST.
TEMPERATURE:
-55 °C TO +85 °C AT FULL RATED VOLTAGE OPERATIONAL TEMPERATURE, +105 °C
MAX STORAGE TEMPERATURE.
ADDITIONAL INFORMATION
ORDERING INFORMATION:
ALL ASC CAPACITORS ARE ORDERED BY "FAMILY CAP-TOL-VOLT"
DESIGNATION. (I.E. TO ORDER AN X390 10.0µF, ±10%, 240VDC CAPACITOR, REQUEST PART NUMBER
"X390 10-10-240")
SEE ALSO:
"GENERAL INFORMATION - POLYPROPYLENE CAPACITORS" DOCUMENT FOR ADDITIONAL
PHYSICAL, ELECTRICAL, AND PERFORMANCE CHARACTERISTICS NOT MENTIONED IN THIS FILE.
WARNING:
INFORMATION ON THIS FILE IS SUBJECT TO CHANGE WITHOUT NOTICE AT ASC'S
DISCRETION.
LAST MODIFIED: 09/26/01
Phone: (308) 284-3611
Fax: (308) 284-8324
301 WEST O STREET
•
OGALLALA, NE 69153
e-mail: sales@ascapacitor.com
web: www.ascapacitor.com