I plan to remove the original 32M crystal oscillator of CC2530 and use FPGA to generate a new 32M clock signal as the crystal oscillator. I want to use a coaxial cable to connect FPGA and CC2530. How ...
1 OverviewLoading Zynq 's naked program is much simpler than making Linux 's SD card boot file.Just put a BOOT.bin file in the FAT32 formatted SD card . As shown in the figure, BOOT.bin needs to conta...
This is definitely a treasure trove of animated graphics. These animated graphics showing signal waveforms in electronic systems help us understand the mechanism of transmission.▲ Figure 1 SPI data tr...
Mainly through the official routines to familiarize yourself with the entire module, NXP Rapid IoT, although the introduction is simple, it is easy to get started, if you are familiar with it, it is r...
1. Is there any difference between the maximum continuous power dissipation (PD) and switching loss of MOS and IGBT? 2. How is PD calculated? 3. What is the significance of PD and what is the relation...
As the functions of microcontrollers increase, their use becomes more and more complicated. If you use the traditional development method, you need to understand various registers before you can use t...