Hall effect joysticks
HF series
Distinctive features and specifications
1, 2 & 3 axis configurations
CANbus J1939 and CANopen options
USB 1.1 HID interface option
MECHANICAL (FOR X, Y AXIS)
Dual sensors for redundancy
Voltage regulator, 24V supply option
Connectorized housing
ENVIRONMENTAL
•
Break Out Force: 1.3N (0.3lbf)
• Operating Force: 2.8N (0.63lbf)
• Maximum Applied Force: 200N (45.00lbf)
• Mechanical Angle of Movement: 36º (18º from center)
• Expected Life: 5 million
• Material: Glass filled nylon
• Package Size: 5.75” x 4.50” x 3.25”
• Lever Action: Single spring, omnidirectional
MECHANICAL (FOR Z AXIS)
•
Operating Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
•
Storage Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
•
Sealing (IP): Up to IP68*
•
EMC Immunity Level (V/M): EN61000-4-3
•
EMC Emissions Level: EN61000-6-3:2001
•
ESD: EN61000-4-2
•
Output linearity: ±200mV
• Dual output
interlinearity (X/Y): ±400mV
• Dual output
interlinearity (Z): ±600mV
ELECTRICAL
•
Break Out Torque: 0.09N·m (0.80lbf·in)
•
Operating Torque: 0.121N·m(1.07lbf·in)
•
Maximum Allowable Torque: 2.50N·m(22.13lbf·in)
•
Hand Mechanical Angle: 60º (30º from center)
•
Handle Action: Spring centering, rotational
•
Expected Life: 5 million
•
Sensor: Hall effect
•
Supply Voltage Operating: 5VDC±0.01VDC
•
Reverse Polarity Max: -10VDC
•
Overvoltage Max: 20VDC
•
Output Voltage: See options
•
Output Impedance: 2Ω
NOTES:
–
All values are nominal.
–
Exact specifications may be subject to configuration. Contact Technical Support for the performance of your
specific configuration.
*
Excludes some handle options.
Note: The company reserves the right to change specifications without notice.
APEM
www.apem.com
HF series
Overview
Hall effect joysticks
HF
SERIES
S
R
X
Y
P
C
W
Z
Limiter Plate
Square
Round
Slotted
Slotted
Plus
Cross
Guided Feel Square
Guided Feel Round
0
1
2
3
4
5
6
Output Options
0V to 5V
0.5V to 4.5V
0.25V to 4.75V
1V to 4V
0V to 5V - Sensor 1
0V to 5V - Sensor 2
0.5V to 4.5V - Sensor 1
0.5V to 4.5V - Sensor 2
0.25V to 4.75V - Sensor 1
0.25V to 4.75V - Sensor 2
1V to 4V - Sensor 1
1V to 4V - Sensor 2
0V to 5V - Sensor 1
5V to 0V - Sensor 2
0.5V to 4.5V - Sensor 1
4.5V to 0.5V - Sensor 2
0.25V to 4.75V - Sensor 1
4.75V to 0.25V - Sensor 2
1V to 4V - Sensor 1
4V to 1V - Sensor 2
USB-Horizontal, Mini B termination
USB-Vertical cable exit
Cursor Emulation
0V to 5V (Voltage regulator)*
±10V (Voltage regulator)**
CANbus J1939
CANopen
Handle
10
11
22
27
33
44
45
46
50
51
52
55
Ball Tip (2 Axis)
Tapered (2 Axis)
1 Pushbutton (2 Axis)
1 Pushbutton (2 Axis), IP67 Sealed
3 Axis
1 Pushbutton (3 Axis)
2 Pushbuttons (3 Axis)
Low Profile (3 Axis)
3 Axis, IP67 Sealed
3 Axis, 1 Pushbutton, IP67 Sealed
3 Axis, 2 Pushbutton, IP67 Sealed
3 Axis, 2 Pushbutton, IP67 Sealed
1
4
Mounting
Drop-in
Rear Mount
7
8
9
10
11
0-U
2-U
1-J
0-V
B-V
2-C
3-C
NOTES
1.
The HF Series joysticks are supplied with a Hirose DF11-12DP-2DS9(24) connector (male receptacle). (Fig 1)
Cable not included. Please request at order entry. Cable connector (female socket) is Hirose DF11-12DS-2C. (Fig 2)
Connector specifications: 12 position 2mm pitch dual row (2x6) pin header.
Wire Color
Black
Red
Blue/White
Blue
Yellow/Black
Yellow
Green/Black
Green
Orange
White
Violet
Up to IP68 available.
Mounting accessories. Standard hardware includes: gasket, clamping ring, and four #4-40x3/4 Phil Ph MS SS screws.
Description
Ground
Power
X-Axis (Dual Output)
X-Axis
Y-Axis (Dual Output)
Y-Axis
Z-Axis (Dual Output)
Z-Axis
Button 1
Button Common
Button 2
* Requires operating voltage 6V
≥
35V
** Requires operating voltage 11V
≥
35V
Fig 1
Fig 2
www.apem.com
Note: The company reserves the right to change specifications without notice.
APEM
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
