Direct Current Resistance (DCR): High Accuracy Milliohmeter-HP4338B or
Equiv.
Self-Resonant Frequency (SRF): Agilent8719ES or Equiv., -20dBm/50mV
Temperature rise current (Ir): Electric Power, Electric current meter, Thermometer.
ΔT ≤ 20˚C
ABRACON IS
ISO 9001 / QS 9000
ISO9001:2008
CERTIFIED
Revised: 11.27.12
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
MULTILAYER CHIP CERAMIC INDUCTORS
AIMC-0402HQ
OPTIONS AND PART IDENTIFICATION:
1.0 x 0.6 x 0.5 mm
AIMC-0402HQ -
-
Inductance Code
Please refer to the
table above
Tolerance
B: ±0.1nH *
C: ±0.2nH*
S: ±0.3nH*
G:
±2%*
H: ±3%*
J: ±5%*
*B,C,S for L=1.0nH~6.2nH
*G,H,J for L=6.8nH~15nH
T: Tape and Reel
(10kpcs / reel)
Packaging
OUTLINE DIMENSIONS:
Recommended Land Pattern
Series
AIMC-0402HQ
L
1.0±0.15
[0.039±0.006]
W
0.6±0.15
[0.024±0.006]
T
0.5±0.15
[0.020±0.006]
a
0.25±0.1
[0.010±0.004]
A
0.45~0.55
B
0.40~0.50
C
0.55~0.65
Materials
Side View
1
2
3
Base Material
Internal Conductor
Pull out Electrode
Dimensions: mm [inch]
Part Name
Top View
4
Terminal Electrode
Ceramic
Ag
Ag
Ag (Inner layer)
Ni-Sn (Outer layer)
Material
1
2
3
4
ABRACON IS
ISO 9001 / QS 9000
ISO9001:2008
CERTIFIED
Revised: 11.27.12
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
MULTILAYER CHIP CERAMIC INDUCTORS
AIMC-0402HQ
REFLOW PROFILE:
∆
∆
∆
∆
∆
∆
1.0 x 0.6 x 0.5 mm
Preheat condi
tion: 150
~200˚C
/60~120sec.
Allowed time above 217˚C: 60~90sec.
Max temp: 260˚C
Max time at max temp: 10sec.
Solder paste: Sn/3.0Ag/0.5Cu
Allowed Reflow time: 2x max
TAPE & REEL:
T: 10,000pcs / reel
A
0.72±0.1
B
1.15±0.1
P
2.0±0.05
T(max)
0.8
C
4.0±0.1mm
4.3±0.2mm
8.4+1.5/-0.0mm
2.45±0.2mm
5.0±0.1mm
58±2.0mm
13.5±0.2mm
3.0±0.1mm
max<14.4mm
178±2.0mm
Storage Conditions
a. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and
humidity in the storage area should be controlled. Recommended conditions:
≤
+40
o
C,
70%
RH (Max.)
b. The solderability of the external electrode may be deteriorated if packages are stored where they are exposed to dust of
harmful gas (e.g. HCI, sulfurous gas of H
2
S).
c. Packaging material may be deformed if package are stored where they are exposed to heat of direct sunlight.
d. In case of storage over 12 months, solderability shall be checked before actual usage.
Dimension: mm
ATTENTION:
Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component
failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating
environment,
written consent and authorization from
Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO 9001 / QS 9000
ISO9001:2008
CERTIFIED
Revised: 11.27.12
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
[i=s]This post was last edited by yhye2world on 2019-8-15 15:10[/i]As shown below, RS232 to RS485 passive converter;
The terminal board on the RS485 port side is lost.Now I want to use a DB9 connector...
When debugging MQTT, because multiple modules and the same program were used, it was found that during the debugging process, when one module was online, it would squeeze out the connection of another...
Starting from now - June 16, the channel for exchanging TI points for chip points has been opened. During this period, the full amount can be exchanged according to the exchange rate. After June 24, t...
An error occurred when simulating and debugging the program: no contex-m device found in jtag chain. How to deal with it?
Model: HuaDa HC32L136K8TA The emulator is J-LINK, the detailed configuration a...
[size=4]Principle of rectifier transformer[/size] [size=4] [/size] [size=4]The principle of rectifier transformer is the same as that of ordinary transformer. Transformer is a device that converts AC ...