OPA37FZ amplifier basic information:
OPA37FZ is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are CERAMIC, DIP-8
OPA37FZ amplifier core information:
The minimum operating temperature of the OPA37FZ is -25 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.055 µA Its maximum average bias current is 0.095 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the OPA37FZ has a nominal slew rate of 11.9 V/us. The maximum slew rate of the OPA37FZ given by the manufacturer is 4.7 mA, while the minimum slew rate is 11 V/us. Its minimum voltage gain is 707945.8. When the op amp is used in a closed loop, at a specified closed loop gain (usually 1 or 2, 10, etc.), the frequency when the OPA37FZ gain becomes 0.707 times the low frequency gain is 63000 kHz.
The nominal supply voltage of the OPA37FZ is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the OPA37FZ is 140 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of OPA37FZ:
OPA37FZ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.
OPA37FZ amplifier additional information:
OPA37FZ adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low offset class of amplifiers. The frequency compensation status of OPA37FZ is: YES (AVCL>=5). Its temperature grade is: OTHER. OPA37FZ is not Rohs certified.
The corresponding JESD-30 code is: R-CDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of OPA37FZ is: DIP. The materials used in the OPA37FZ package are mostly CERAMIC, METAL-SEALED COFIRED. The package shape is RECTANGULAR.
The OPA37FZ package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.
OPA37FZ amplifier basic information:
OPA37FZ is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are CERAMIC, DIP-8
OPA37FZ amplifier core information:
The minimum operating temperature of the OPA37FZ is -25 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.055 µA Its maximum average bias current is 0.095 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the OPA37FZ has a nominal slew rate of 11.9 V/us. The maximum slew rate of the OPA37FZ given by the manufacturer is 4.7 mA, while the minimum slew rate is 11 V/us. Its minimum voltage gain is 707945.8. When the op amp is used in a closed loop, at a specified closed loop gain (usually 1 or 2, 10, etc.), the frequency when the OPA37FZ gain becomes 0.707 times the low frequency gain is 63000 kHz.
The nominal supply voltage of the OPA37FZ is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the OPA37FZ is 140 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of OPA37FZ:
OPA37FZ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.
OPA37FZ amplifier additional information:
OPA37FZ adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low offset class of amplifiers. The frequency compensation status of OPA37FZ is: YES (AVCL>=5). Its temperature grade is: OTHER. OPA37FZ is not Rohs certified.
The corresponding JESD-30 code is: R-CDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of OPA37FZ is: DIP. The materials used in the OPA37FZ package are mostly CERAMIC, METAL-SEALED COFIRED. The package shape is RECTANGULAR.
The OPA37FZ package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.
| Parameter Name | Attribute value |
| Is it Rohs certified? | incompatible |
| package instruction | CERAMIC, DIP-8 |
| Reach Compliance Code | unknown |
| Amplifier type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Maximum average bias current (IIB) | 0.095 µA |
| Maximum bias current (IIB) at 25C | 0.055 µA |
| Minimum Common Mode Rejection Ratio | 102 dB |
| Nominal Common Mode Rejection Ratio | 124 dB |
| frequency compensation | YES (AVCL>=5) |
| Maximum input offset voltage | 140 µV |
| JESD-30 code | R-CDIP-T8 |
| JESD-609 code | e0 |
| low-dissonance | YES |
| Negative supply voltage upper limit | -22 V |
| Nominal Negative Supply Voltage (Vsup) | -15 V |
| Number of functions | 1 |
| Number of terminals | 8 |
| Maximum operating temperature | 85 °C |
| Minimum operating temperature | -25 °C |
| Package body material | CERAMIC, METAL-SEALED COFIRED |
| encapsulated code | DIP |
| Encapsulate equivalent code | DIP8,.3 |
| Package shape | RECTANGULAR |
| Package form | IN-LINE |
| Peak Reflow Temperature (Celsius) | NOT SPECIFIED |
| power supply | +-15 V |
| Certification status | Not Qualified |
| minimum slew rate | 11 V/us |
| Nominal slew rate | 11.9 V/us |
| Maximum slew rate | 4.7 mA |
| Supply voltage upper limit | 22 V |
| Nominal supply voltage (Vsup) | 15 V |
| surface mount | NO |
| technology | BIPOLAR |
| Temperature level | OTHER |
| Terminal surface | Tin/Lead (Sn/Pb) |
| Terminal form | THROUGH-HOLE |
| Terminal pitch | 2.54 mm |
| Terminal location | DUAL |
| Maximum time at peak reflow temperature | NOT SPECIFIED |
| Nominal Uniform Gain Bandwidth | 63000 kHz |
| Minimum voltage gain | 707945.8 |
| Base Number Matches | 1 |
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
circle
京公网安备 11010802033920号
EEWORLD
