Tianer Technology was established in 1988 and has the R&D capabilities and manufacturing technology for chip resistors and arrays. In the face of today's diverse customer needs, we continue to invest in the development of high-quality products and new manufacturing technologies, and provide customers with a one-time purchase service for multiple components to fully meet customer needs and improve customer satisfaction with our products. In terms of quality management, our company has passed ISO-9001, ISO-TS16949, TTQS certification and complies with the AEC-Q200 automotive electronics self-testing standard. We continuously improve the quality of our products and services through the analysis and improvement of product yield rate indicators, customer satisfaction surveys and other reports, in order to enhance customer trust in our company and establish a good partnership with our customers.
Applications of RF Transformers
RF transformers are widely used in electronic circuitsTransformer Circuits and Impedance Relationships
When the signal current passes through the primary winding, it cr...
A filter is a component that selectively passes "what it likes" and blocks "what it doesn't like." When we discuss the properties of a filter, we usually describe it in the frequency domain.
In most c...
[i=s]This post was last edited by manhuami2007 on 2018-12-27 16:20[/i] Using an online IDE can indeed quickly complete development. The URL of the online IDE is: [url=https://rapid-iot-studio.nxp.com/...
Key Laboratory of Antenna and Microwave Technology, Xidian University
5G miniaturized, high-performance terminal and base station antenna technology
Professor Zhao Luyu
Contents:
1. Technical backgrou...
Source: Endless Fun
Although there are many retro game consoles developed based on Raspberry Pi, they are also easy to buy.
But it is still necessary to recommend the following one - a retro game cons...
Transistor static operating point--------If the static operating point is not set properly, saturation distortion (static operating point is too high) or cutoff distortion (static operating point is t...