Boost, buck, buck-boost high frequency PWM dimming LED constant current driver chip
Features
MT7282 is a 2.5V~40V wide input range, white light LED constant current driver chip, MT7282 can be set to buck, boost and buck-boost topology. It can achieve 10W driving capability at AC12V/DC12V input voltage.
MT7282 uses a fixed operating frequency and current mode to adjust the LED current. The system has fast transient response, stable loop and simple design.
MT7282 uses high-current detection technology, which can set the average operating current of the LED through an external resistor. The low reference voltage of 205mV effectively reduces power loss and improves efficiency. The fixed operating frequency of 450kHz minimizes external inductance, input and output capacitance.
MT7282 supports both PWM dimming and analog dimming through a single control pin.
The chip includes protection mechanisms such as overvoltage protection (OVP), overcurrent protection (OCP) and overtemperature protection (OTP) to ensure that the system works safely and reliably.
Parameters
. Input voltage range: 2.5V~40V
. Up to 95% efficiency
. Cycle-by-cycle overcurrent protection
. Built-in 0.2ohm power MOS tube
. Supports boost, buck-boost, and buck topologies
. LED over-temperature protection
. Use low equivalent series resistance (ERS) ceramic capacitors to ensure system stability
. Over temperature protection and over voltage protection
. Overvoltage protection externally adjustable
. Fixed 450KHz operating frequency
. Frequency jitter technology reduces electromagnetic interference EMI
. Low feedback voltage: 205mV
. Adjustable soft start mechanism
. Support analog dimming and PWM dimming up to 10KHz
. ESOP8 package
Description: Boost, Buck, Buck-Boost
Vin(V): 2.5V~40V
Maximum driving capability: 12W
Power factor: --
Dimming method: PWM, Linear
Application
Boost/Boost-Boost MR16, Car Lights, Emergency Lights, Solar Drive Lights
Popular Components