D1272H-20P-48 datasheet, PDF - EEWORLD Datasheet

D1272H-20P-48: DescriptionConnectors, Rohs Yes, Active, 1.2A, 250V, -40℃, 105℃, 20m, 500V AC/minute, 1.27mm; CategoryThe connector The connector; File Size304KB，4 Pages; ManufacturerCHANGJIANG CONNECTORS Co.,LTD.; Websitehttp://www.cjt.com/; Environmental Compliance; Shenzhen Changjiang Connector Co., Ltd. is a world-leading professional connector manufacturer with 20 years of experience. Its products mainly include wire-to-board connectors, board-to-board connectors, wire-to-wire connectors, wire harness processing and connector design, mold development and manufacturing. It is compatible with international brand connectors from Europe, the United States, Japan, South Korea and other countries.

Download Datasheet Parametric View All

D1272H-20P-48 Overview

Connectors, Rohs Yes, Active, 1.2A, 250V, -40℃, 105℃, 20m, 500V AC/minute, 1.27mm

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Reach Compliance Code	Yes
Is it lead-free?	unknown
Rated current	1.2A
Rated voltage	250V
Minimum Temp	-40℃
Maximum Temp	105℃
Contact resistance	20m
Dielectric withstand voltage	500V AC/minute
Terminal pitch	1.27mm
Contact completed and terminated
Contact material
originPNs	92315-2048

D1272 SERIES

1.27mm pitch IDC wire to board connector

Specifications

Current rating:1.2A AC,DC

Voltage rating:250V AC,DC

Temperature range:-40°C~+105°C

Contact resistance:20m

Max.

Insulation resistance:1000M

Min.

Withstanding voltage:500V AC/minute

*Compliant with RoHS and REACH*

*Meet the HF/Halogen Free,need to

customize*

*Contact CJT for details*

CHANGJIANG CONNECTORS TEL:+86-755-29959119 29959129 FAX:+86-755-29959139 Http://www.CJT.cn

D-6

Question: About multi-channel output voltage regulation: The figure below is a flyback multi-channel output circuit. If both 5V and 3.3V are output normally, The voltage-dividing resistors R1 and R2 will bias the transistor Q1. If Q3 and Q2 are in the off s...; Aguilera Power technology

Compile the kernel separately, and uboot generates many files. Which one should I use?: 2.3 Compile the kernel separately, and uboot generates many files. Which one should I use? answer: The kernel compiled file is the zImage file in the ~/MYiR-imx-Linux/arch/arm/boot/ directory. The fil...; blingbling111 Embedded System

I recently encountered a problem when drawing the board and pulling the wires. I was a little confused and didn't understand it very clearly, so I came to teach you about "RF radio frequency signals": I'll attach two pictures first to help you raise doubts.This is the RF signal routing with regular cut corners.The frequencies are all in the LS bandThis is a general arc trace RF signalThe frequencie...; btty038 PCB Design

Question about the maximum current allowed by the EN pin of the LDO power chip: The picture shows the maximum and minimum current of the EN enable pin of an LDO when EN = 0. My questions are as follows: 1) Is this maximum current and minimum current the maximum/minimum current co...; xiaxingxing Analog electronics

Bose small speaker disassembly and repair: The previous post disassembled the small speaker and preliminarily determined the fault. For details, see the following link Bose small speaker disassembly It was my first time disassembling it, and I...; tianshuihu Making friends through disassembly

Understanding Electromagnetic Radiation: [i=s]This post was last edited by btty038 on 2020-8-27 18:43[/i]...; btty038 RF/Wirelessly

Popular Components