Shenzhen Changjiang Connector Co., Ltd. is a world-leading professional connector manufacturer with 20 years of experience. Its products mainly include wire-to-board connectors, board-to-board connectors, wire-to-wire connectors, wire harness processing and connector design, mold development and manufacturing. It is compatible with international brand connectors from Europe, the United States, Japan, South Korea and other countries.
The communications market continues to evolve, and the development of new products is more complex than ever. These creative, innovative solutions rely on engineers to make them a reality. Qorvo under...
FPGA learning mainly uses VERILOG language, which is a hardware description language. In addition to this, do we also need to use C language for design?...
[i=s]This post was last edited by lzx_18570633112 on 2019-9-17 17:44[/i]The MOSFET driving signals can be measured, but the voltage source current is zero, indicating that the circuit is not connected...
[i=s]This post was last edited by zy459994202 on 2019-11-6 16:41[/i]Recently, I found that the RT-Thread MicroPython development environment has released version 1.0.0 after many iterations. I would l...
I have used or seen quite a lot of domestic chips. I won't mention Shenwei and Loongson. Basically, anyone who works with domestic products will come into contact with them. The energy efficiency rati...
introduction
With the rapid development of computer technology, communication technology and electronic technology, the automation level of power system is also increasing. The reliability...[Details]
introduction
DC regulated power supply is a relatively common electronic device, which has been widely used in many fields such as electronic circuits, experimental teaching, scientific rese...[Details]
(1) The modulation circuit is mainly completed by a 32.768KHz crystal oscillator. This circuit generates an oscillation signal through the self-excited oscillation of the crystal oscillator. The si...[Details]
The development of high-energy LEDs represents the most significant innovation in the lighting industry in recent years. Loosely defined as LEDs of at least 1W, these high-energy or high-brightness ...[Details]
1. What is LED light? LED: Semiconductor light-emitting diode. Directly convert electrical energy into light energy 2. LED operating parameters The working voltage drop of ordinary light-emitting d...[Details]
Shanhai Semiconductor completes financing of over 10 million US dollars and launches internationally advanced signal chain products
Domestic high-performance mixed-analog and signal ...[Details]
The minimum system of the single-chip microcomputer is mainly composed of power supply, reset, oscillation circuit and expansion part. The minimum system schematic diagram is shown in Figure 4.1. Mini...[Details]
As the incidence of ATMs has remained high in recent years, commercial banks have strengthened
video surveillance
measures for teller machines and installed professional surveillance syst...[Details]
OFweek Cup 2022 China
Robot
Industry Annual Awards (abbreviated as OFweek Robot Awards 2022) is jointly organized by OFweek, China's high-tech industry portal, and its authoritative robot p...[Details]
Accenture is a leading global management consulting and professional services company headquartered in Ireland. Since it was first listed in the Fortune Global 500 in 2016 at 312th place, it has ...[Details]
Battery thermal runaway has become a hot topic, and battery safety has become a research and development focus for automakers.
In recent years, with the rapid development of the new ener...[Details]
At present, there are various output modes of level switches in the domestic market. The most common ones are as follows: transistor, relay, thyristor, two-wire system. Faced with these various out...[Details]
ICCAVR is a tool that complies with the ANSI standard for developing MCU programs using C language. It has the advantages of being suitable for use, easy to use, and having strong technical support. ...[Details]
The winding is always wound over at least two stator teeth. In concentrated winding, one stator tooth is wound. Both types of winding have different advantages and disadvantages.
When to...[Details]
The in-vehicle display market is developing in a positive direction.
As Gasgoo Automotive Research Institute said in the "In-Vehicle Display Industry Report (2024 Edition)", large-screen...[Details]